'80 1100 Imvubu Build
Moderators: sunnbobb, Neil, Forum Moderators
- wheeliedog
- Silver Member
- Posts: 519
- Joined: Wed Dec 03, 2014 5:21 am
- Location: Pretoria, South Africa
Re: '80 1100 Imvubu Build
Hey sunnbobb, from the technical thread it looks like I might be heading the same way
Deathbypizza, I sent you a PM.
Deathbypizza, I sent you a PM.
naked 1980 GL1100 under construction.
- sunnbobb
- Facebook Admin
- Posts: 21272
- Joined: Thu Jan 10, 2008 4:09 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/sunnbobb/
- Location: LaConner, WA
Re: '80 1100 Imvubu Build
thumbs up!
I found the end of the internet
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
-
- Chrome Member
- Posts: 128
- Joined: Wed Nov 11, 2015 4:10 am
- Location: Newfoundland
- Contact:
Re: '80 1100 Imvubu Build
i had the dilemma of the gauge not mounting right. you mentioned you modified the acewell mount a little.wheeliedog wrote:I've also done a little wiring. Little results from a large effort.
I will not mention my first attempt where I just assumed the red wire is live and the black wire is earth. After studying the wiring diagram for hours I figured out my mistake and I got the clocks to come on. However they only came on with the ignition key in Park position. Not very practical for riding!
I did some homework and found a colour wiring diagram on the net. That has certainly helped to trace a wire from start to finish. I kept ending up at the wrong place with the black and white copy of the maze published in the manual
I currently have five of the 300 wires correct, and some life in the clocks.
I already have a VDO needle water temp gauge on order, the digital one I have now doesn't look as good as I thought it might.
can you show me what you did? thanks!
1980 GL1100I (parts)
1978 GL1000
"I Have No Idea What I Am Doing."
1978 GL1000
"I Have No Idea What I Am Doing."
- wheeliedog
- Silver Member
- Posts: 519
- Joined: Wed Dec 03, 2014 5:21 am
- Location: Pretoria, South Africa
Re: '80 1100 Imvubu Build
Hoo Boy Deathbypizza, you are asking me about something I did back in 2015, when remembering what I had for breakfast this morning is already a tall order...
My Acewell doesn't show temperature, unlike yours. I had to fit a separate temperature gauge and I wanted the bevels to be at the same height. I bent the supplied Acewell mounting plate in a flat 'Z' to get the Acewell to sit a bit higher. I think I drilled the mounting hole in the plate a bit bigger too and bolted it to one of the existing mounting holes in the top yoke where the original cluster went. I used a stainless allen bolt and dome nut.
I'm not sure what problem you are having?
My Acewell doesn't show temperature, unlike yours. I had to fit a separate temperature gauge and I wanted the bevels to be at the same height. I bent the supplied Acewell mounting plate in a flat 'Z' to get the Acewell to sit a bit higher. I think I drilled the mounting hole in the plate a bit bigger too and bolted it to one of the existing mounting holes in the top yoke where the original cluster went. I used a stainless allen bolt and dome nut.
I'm not sure what problem you are having?
naked 1980 GL1100 under construction.
-
- Chrome Member
- Posts: 128
- Joined: Wed Nov 11, 2015 4:10 am
- Location: Newfoundland
- Contact:
Re: '80 1100 Imvubu Build
ha ha i know, i was having trouble getting the mount they sold me to work, and the stock mount on the acewell to work. then i remember you had it and i hunted for the post haha. you are referring to bending the bracket that is screwed onto the back with 3 little screws right? in the mean time here is the front view of my bike i mocked up today. honestly been taking a lot of inspiration from your build. if its possible to send me a photo of the bracket itself that would rule!
i put the new choke in the old spot whre the cluster would have went on the right. drilled it out a bit and got it to fit!
i put the new choke in the old spot whre the cluster would have went on the right. drilled it out a bit and got it to fit!
1980 GL1100I (parts)
1978 GL1000
"I Have No Idea What I Am Doing."
1978 GL1000
"I Have No Idea What I Am Doing."
- wheeliedog
- Silver Member
- Posts: 519
- Joined: Wed Dec 03, 2014 5:21 am
- Location: Pretoria, South Africa
Re: '80 1100 Imvubu Build
Looking good Curtis, I see you used the Harley shock caps too.
I'll PM you a pic or two.
I'll PM you a pic or two.
naked 1980 GL1100 under construction.
-
- Chrome Member
- Posts: 128
- Joined: Wed Nov 11, 2015 4:10 am
- Location: Newfoundland
- Contact:
Re: '80 1100 Imvubu Build
yea! found the "joker machine" ones on aliexpress for 18$ ha
1980 GL1100I (parts)
1978 GL1000
"I Have No Idea What I Am Doing."
1978 GL1000
"I Have No Idea What I Am Doing."
-
- Chrome Member
- Posts: 142
- Joined: Fri Jun 26, 2009 12:15 am
- Location: Australia
- wheeliedog
- Silver Member
- Posts: 519
- Joined: Wed Dec 03, 2014 5:21 am
- Location: Pretoria, South Africa
Re: '80 1100 Imvubu Build
Mine are aftermarket bars that happened to be on special and I bought them on the spur of the moment. They were rated as 'superbike' bars and ended up working very well for me. Not as low as typical cafe racer bars so tank clearance and comfort are not an issue.
naked 1980 GL1100 under construction.
- sunnbobb
- Facebook Admin
- Posts: 21272
- Joined: Thu Jan 10, 2008 4:09 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/sunnbobb/
- Location: LaConner, WA
Re: '80 1100 Imvubu Build
I like the choke idea!
I found the end of the internet
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
-
- Chrome Member
- Posts: 128
- Joined: Wed Nov 11, 2015 4:10 am
- Location: Newfoundland
- Contact:
Re: '80 1100 Imvubu Build
Emgo euro drag? I think. Ordered from 4 into 1chartoo wrote:What handle bars are you using?
1980 GL1100I (parts)
1978 GL1000
"I Have No Idea What I Am Doing."
1978 GL1000
"I Have No Idea What I Am Doing."
- wheeliedog
- Silver Member
- Posts: 519
- Joined: Wed Dec 03, 2014 5:21 am
- Location: Pretoria, South Africa
Re: '80 1100 Imvubu Build
I will be absent here for a while.
My father passed away late yesterday afternoon. He recovered from a major stroke last year, but the extra time was only given as a gift for us all to say our farewells. His health deteriorated rapidly this year. He passed away gently in his sleep at home where he wanted to be, as did we all, in the presence of my Mother and my two brothers who also live in Cape Town.
He was a remarkable man, and many will miss him.
My father passed away late yesterday afternoon. He recovered from a major stroke last year, but the extra time was only given as a gift for us all to say our farewells. His health deteriorated rapidly this year. He passed away gently in his sleep at home where he wanted to be, as did we all, in the presence of my Mother and my two brothers who also live in Cape Town.
He was a remarkable man, and many will miss him.
naked 1980 GL1100 under construction.
-
- Chrome Member
- Posts: 128
- Joined: Wed Nov 11, 2015 4:10 am
- Location: Newfoundland
- Contact:
Re: '80 1100 Imvubu Build
My condolences man. Love from canada
1980 GL1100I (parts)
1978 GL1000
"I Have No Idea What I Am Doing."
1978 GL1000
"I Have No Idea What I Am Doing."
- BikeMaine
- Gold Member
- Posts: 1105
- Joined: Sun Feb 07, 2016 7:57 pm
- Location: Maine, U.S.A.
Re: '80 1100 Imvubu Build
Oh man, I'm very sorry to hear that Brother.
You have my condolences and my heart felt prayers.
Kevin
You have my condolences and my heart felt prayers.
Kevin
Kevin
1982 GL1100A
1982 GL1100A
- CYBORG
- Moderator
- Posts: 24536
- Joined: Mon Jan 14, 2008 12:52 pm
- Location: Muskegon mich
Re: '80 1100 Imvubu Build
Sad news....condolences
1978 custom GL1000
1977 custom with 1200 engine
1985 gl1200
1977 custom with 1200 engine
1985 gl1200
-
- Similar Topics
- Replies
- Views
- Last post