Turn signals worked but now they don't

Cousin Johnny · #1

I'm almost done with my conversion to naked and am wiring up the front lights. Before I started the blinkers worked. Now all the lights work but they don't flash. I've got the front and rear turn signals wired and all works ONCE but not blinking. Do I need a new flasher? Thanks. Johnny

#2

could be a flasher or the wrong bulbs in the turn signal housing. did you go LED? that would require a special flasher

Cousin Johnny · #3

No LEDs but aftermarket turn signals with bulbs of unknown specs. I am going to run over to Pep Boys and buy a flasher now and see what happens. Thanks.

#4

get the electronic type. they will work with any type bulb

#5

Was the bike running? Sometimes while working in the shop with a low battery they will not flash right. Might try hooking up a charger to it and trying them again.

Cousin Johnny · #6

New electronic flasher... $12.99. Working signals... priceless. That did the trick. Thanks for the help.

#7

glad it worked out for you

Support our sponsors.

Turn signals worked but now they don't

Turn signals worked but now they don't

Re: Turn signals worked but now they don't

Re: Turn signals worked but now they don't

Re: Turn signals worked but now they don't

Re: Turn signals worked but now they don't

Re: Turn signals worked but now they don't

Re: Turn signals worked but now they don't