Need source for !{%{' stupid copper crush washers for forks.

Discuss everything about Honda GoldWing. Feel free to ask any question related to GoldWing.

Moderators: CYBORG, Oldewing, robin1731, Forum Moderators

Post Reply
User avatar
zavikan
Silver Member
Silver Member
Posts: 668
Joined: Mon Nov 23, 2009 9:08 am

Need source for !{%{' stupid copper crush washers for forks.

#1

Post by zavikan »

Title says it. Mine are totally old junk and need replacement. Nothing the rightnsize or even usable at the three local hardware stores, or the local auto parts store.

Need the 2 for the drain, and 2 for the damper rod...
'76 Goldwing GL1000 33k
'77 Goldwing GL1000 53k SOLD
User avatar
CYBORG
Moderator
Moderator
Posts: 24538
Joined: Mon Jan 14, 2008 12:52 pm
Location: Muskegon mich

Re: Need source for !{%{' stupid copper crush washers for fo

#2

Post by CYBORG »

did you try the honda dealer?
1978 custom GL1000
1977 custom with 1200 engine
1985 gl1200
User avatar
robin1731
Membership Admin
Membership Admin
Posts: 21724
Joined: Mon May 29, 2006 8:31 am
Location: Decatur, Indiana

Re: Need source for !{%{' stupid copper crush washers for fo

#3

Post by robin1731 »

Yeah, available from Honda.
1976 Goldwing Super Sport
1985 Honda Elite
1976 KZ900 Dragbike
1992 ZX7 Dragbike (KZ900 style motor w/NOS)
and a rotation of various purchases
Randakk approved Carb Rebuilder
backwoodz
Zinc Member
Zinc Member
Posts: 52
Joined: Sun Aug 04, 2013 9:41 pm
Location: Swartz Creek Michigan

Re: Need source for !{%{' stupid copper crush washers for fo

#4

Post by backwoodz »

Not sure what sizes you are needing but the small ring terminals on many electrical fittings are soft aluminum. Just snip the wire contact off and gets you out of a pinch until you can find the correct ones.
1981 GL1100
User avatar
zavikan
Silver Member
Silver Member
Posts: 668
Joined: Mon Nov 23, 2009 9:08 am

Re: Need source for !{%{' stupid copper crush washers for fo

#5

Post by zavikan »

Honda dealer is a looong distance away. And for such a simple part, Id feel like I was special ordering a 10mm nut....

Autozone is a possibility, and Home depot is a little over an hr away...

Any kind of copper washer selection there?
'76 Goldwing GL1000 33k
'77 Goldwing GL1000 53k SOLD
User avatar
gltriker
Honored Life Member
Honored Life Member
Posts: 5053
Joined: Fri Sep 24, 2010 9:11 pm
Location: central NY State

Re: Need source for !{%{' stupid copper crush washers for fo

#6

Post by gltriker »

parts reference numbers 20 and 21 on this page for on-line source of OEM parts I utilize.

http://www.westernhonda.com/fiche_secti ... veh=131058
Cliff (74yrs ;) )

Keep your eyes and ears open and you'll learn something new, everyday. tumb2

New users please visit our "Shop Talk" for common tips and help: <---jdvorchak
http://www.ngwclub.com/forum/page/ST
^^^^^^^click up here^^^^^ :oldies

RE: a thorough fuel tank cleaning
"And your carbs will thank you. They no longer live down stream from a sewage plant." -gregforesi tumb2
"Can't see the paint when your looking thru the handlebars..........." -Oldewing ;)
"I'd rather Ride than Shine" -RAT tumb2 Me Too!!

Cliff

'75 GL1000 home built trike; http://www.ngwclub.com/forum/viewtopic.php?f=30&t=39996
October,2017 BOTM :shock: https://nakedgoldwingsclub.com/forum/page/Welcome

previous rides:
1953 H-D Servi-car, naked, 1969-1978 (serial#53G1559 committed to memory!)
1980 CB900 Custom (triked) 1997-2003 .... R.I.P.
Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “GoldWing Tech Discussions”