Uhoh. Left over part from front wheel rebuild...

[zavikan]

Pulled apart front wheel assembly and replaced rotors. Cleaned up stuff and polished the speedo drive.

Put it all together and have been riding it. No issues.

Found a super thin spring steel like washer approx 1" inside diameter, 1 1/8 outside. In the grass outside my basement access. Worked on the wheel in this area.

This either came from the wheel, or my John Deere......

[avg_joe]

Maybe from the speedo drive?

[Whiskerfish]

Yeup seems like I recall a thin spacer in there. Might be best to go to one of the online parts places to see if you can see it there.

[rogue1000]

Sorry for laughing, but that happens to me so often that I have little container's of parts that were left over...apparently non-essential..I still have stuff from early VW's that may be rare, since I have no idea what they are...

[oldwings 78]

Mother Hondas bible doesn't show a spring washer in the manual. That is not the final word on the subject though. The webmaster has been into the front ends of these bikes more times than I so I defer final judgement to the pros.
Terry

[CYBORG]

how about a picture of the part.

[Whiskerfish]

Here is the parts breakdown if that helps any

Front wheel install1.jpg (34.35 KiB) Viewed 421 times