Clutch housing removal

Discuss everything about Honda GoldWing. Feel free to ask any question related to GoldWing.

Moderators: CYBORG, Oldewing, robin1731, Forum Moderators

Post Reply
User avatar
nelsonbc25
Brass Member
Brass Member
Posts: 30
Joined: Sat Feb 08, 2014 10:15 pm
Location: Indiana

Clutch housing removal

#1

Post by nelsonbc25 »

I apologize in advance if the answer to this is posted somewhere else. I've raked this site, and the rest of the internet, for the last five hours to no avail.

In the Clymer manual, the instructions for splitting the case state to do steps 1-19 to dissemble the engine for overhauling. Well, one of the steps is remove clutch housing, but nowhere in the book does it give directions on how to accomplish this. Could someone help me out please?
The Edge... there is no honest way to explain it because the only people who really know where it is are the ones who have gone over.
-Hunter S. Thompson

2004 Kawasaki EX250
1982 GL1100 ダークフェニックス(Dark Phoenix)
User avatar
Oldewing
Secretary
Secretary
Posts: 8177
Joined: Wed Jun 08, 2005 8:19 pm
Location: Gahanna Ohio

Re: Clutch housing removal

#2

Post by Oldewing »

PM sent.
82 GL1100 Interstate-Oldewing October 23 BOTM
06 GL1800 Road bike, as in Rode alot...
Sometimes I wrestle with my inner demons.........
Other times we just hug.......

Team 898
Team LTD 993
Team 76 R2B3
And always remember: beer has some food value--but food has NO beer value...
User avatar
nelsonbc25
Brass Member
Brass Member
Posts: 30
Joined: Sat Feb 08, 2014 10:15 pm
Location: Indiana

Re: Clutch housing removal

#3

Post by nelsonbc25 »

Got it with much thanks to Oldewing. action1
The Edge... there is no honest way to explain it because the only people who really know where it is are the ones who have gone over.
-Hunter S. Thompson

2004 Kawasaki EX250
1982 GL1100 ダークフェニックス(Dark Phoenix)
User avatar
Oldewing
Secretary
Secretary
Posts: 8177
Joined: Wed Jun 08, 2005 8:19 pm
Location: Gahanna Ohio

Re: Clutch housing removal

#4

Post by Oldewing »

Glad to hear, so where are you headed......and why? Cause we are nosey like that,,,,
82 GL1100 Interstate-Oldewing October 23 BOTM
06 GL1800 Road bike, as in Rode alot...
Sometimes I wrestle with my inner demons.........
Other times we just hug.......

Team 898
Team LTD 993
Team 76 R2B3
And always remember: beer has some food value--but food has NO beer value...
User avatar
nelsonbc25
Brass Member
Brass Member
Posts: 30
Joined: Sat Feb 08, 2014 10:15 pm
Location: Indiana

Re: Clutch housing removal

#5

Post by nelsonbc25 »

Working on tearing down the engine to replace the gaskets and seals for my Dark Phoenix build. Check the link in my signature
The Edge... there is no honest way to explain it because the only people who really know where it is are the ones who have gone over.
-Hunter S. Thompson

2004 Kawasaki EX250
1982 GL1100 ダークフェニックス(Dark Phoenix)
Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “GoldWing Tech Discussions”