Rebuild 83 front forks parts list
Moderators: CYBORG, Oldewing, robin1731, Forum Moderators
- ericheath
- Honored Life Member
- Posts: 9581
- Joined: Wed Jul 29, 2009 11:20 am
- Location: Winnipeg, Manituba
Rebuild 83 front forks parts list
Looking for suggestions from the experts as to what parts to include in rebuilding a set of 83 front forks. Honda still sells a front forks seal kit, #37 below. These forks have 90 k miles and look poor. I haven't disassembled them yet, but prefer to have parts on hand when I do. It is pretty expected to put new slider bushings in, #13 below. What about the bush (#12 below) for the fork pipe?
As always, much thanks in advance, Eric
Anyone know of other things I should plan on replacing besides these? The Trac mechanism/system? I hope to put new Progressive springs in and lose the air control. As always, much thanks in advance, Eric
Whatever I suggest here should be given ample time for a moderator to delicately correct. I apologize in advance.
77 WING, 1200 engine with 77 heads, cams, gl1100 foot pegs, Magna V65 front end, 764A carbs, [-gone Suzuki M109 monoshock--, replaced with gl1100 shocks] gl 1200 swing arm, gl1500 final drive, wheel and rear brakes Valkyrie seat, Meanstreak tank, Sportster pipes, Power Arc ignition off crank.
77 Wing. black
83 Wing, in pieces
"Continuing education is important even if the subject matter is fairly useless (as in this case)."---Greg Foresi
77 WING, 1200 engine with 77 heads, cams, gl1100 foot pegs, Magna V65 front end, 764A carbs, [-gone Suzuki M109 monoshock--, replaced with gl1100 shocks] gl 1200 swing arm, gl1500 final drive, wheel and rear brakes Valkyrie seat, Meanstreak tank, Sportster pipes, Power Arc ignition off crank.
77 Wing. black
83 Wing, in pieces
"Continuing education is important even if the subject matter is fairly useless (as in this case)."---Greg Foresi
- Motowalt
- Gold Member
- Posts: 1334
- Joined: Tue Dec 28, 2010 9:48 pm
- Location: Texas Hill Country, USA
Re: Rebuild 83 front forks parts list
Hey Eric,
Watching this thread in case my 83 front end needs attention sometime down the road...
I'll be interested in which weight Progressive springs you use and how they improve things...
How do you plan to block off the air openings?
Watching this thread in case my 83 front end needs attention sometime down the road...
I'll be interested in which weight Progressive springs you use and how they improve things...
How do you plan to block off the air openings?
- ericheath
- Honored Life Member
- Posts: 9581
- Joined: Wed Jul 29, 2009 11:20 am
- Location: Winnipeg, Manituba
Re: Rebuild 83 front forks parts list
No plan yet, I do recall Grizzly hippy saying the caps for a different model fit it. vr800??? $40 On my Magna forks, I just brazed the hole on the fork tube.
Whatever I suggest here should be given ample time for a moderator to delicately correct. I apologize in advance.
77 WING, 1200 engine with 77 heads, cams, gl1100 foot pegs, Magna V65 front end, 764A carbs, [-gone Suzuki M109 monoshock--, replaced with gl1100 shocks] gl 1200 swing arm, gl1500 final drive, wheel and rear brakes Valkyrie seat, Meanstreak tank, Sportster pipes, Power Arc ignition off crank.
77 Wing. black
83 Wing, in pieces
"Continuing education is important even if the subject matter is fairly useless (as in this case)."---Greg Foresi
77 WING, 1200 engine with 77 heads, cams, gl1100 foot pegs, Magna V65 front end, 764A carbs, [-gone Suzuki M109 monoshock--, replaced with gl1100 shocks] gl 1200 swing arm, gl1500 final drive, wheel and rear brakes Valkyrie seat, Meanstreak tank, Sportster pipes, Power Arc ignition off crank.
77 Wing. black
83 Wing, in pieces
"Continuing education is important even if the subject matter is fairly useless (as in this case)."---Greg Foresi
- JBz
- SUPER BIKER!!!!
- Posts: 3070
- Joined: Wed Jan 31, 2007 8:11 pm
- Location: dayton nv
Re: Rebuild 83 front forks parts list
id replace 12 also if that's the upper bushing and the dust seals on the trac assembly. expensive little buggers. it takes 2 per side...........jb
jbz........... Thinkin about sh-t too hard and You wont get anything done
- ericheath
- Honored Life Member
- Posts: 9581
- Joined: Wed Jul 29, 2009 11:20 am
- Location: Winnipeg, Manituba
Re: Rebuild 83 front forks parts list
I'm trying to picture #12, it must be this copper one?
Whatever I suggest here should be given ample time for a moderator to delicately correct. I apologize in advance.
77 WING, 1200 engine with 77 heads, cams, gl1100 foot pegs, Magna V65 front end, 764A carbs, [-gone Suzuki M109 monoshock--, replaced with gl1100 shocks] gl 1200 swing arm, gl1500 final drive, wheel and rear brakes Valkyrie seat, Meanstreak tank, Sportster pipes, Power Arc ignition off crank.
77 Wing. black
83 Wing, in pieces
"Continuing education is important even if the subject matter is fairly useless (as in this case)."---Greg Foresi
77 WING, 1200 engine with 77 heads, cams, gl1100 foot pegs, Magna V65 front end, 764A carbs, [-gone Suzuki M109 monoshock--, replaced with gl1100 shocks] gl 1200 swing arm, gl1500 final drive, wheel and rear brakes Valkyrie seat, Meanstreak tank, Sportster pipes, Power Arc ignition off crank.
77 Wing. black
83 Wing, in pieces
"Continuing education is important even if the subject matter is fairly useless (as in this case)."---Greg Foresi
- robin1731
- Membership Admin
- Posts: 21729
- Joined: Mon May 29, 2006 8:31 am
- Location: Decatur, Indiana
Re: Rebuild 83 front forks parts list
ericheath wrote:I'm trying to picture #12, it must be this copper one?
That's it, and I would replace it. I usually do both when I do 1100 forks.
1976 Goldwing Super Sport
1985 Honda Elite
1976 KZ900 Dragbike
1992 ZX7 Dragbike (KZ900 style motor w/NOS)
and a rotation of various purchases
Randakk approved Carb Rebuilder
1985 Honda Elite
1976 KZ900 Dragbike
1992 ZX7 Dragbike (KZ900 style motor w/NOS)
and a rotation of various purchases
Randakk approved Carb Rebuilder
- ericheath
- Honored Life Member
- Posts: 9581
- Joined: Wed Jul 29, 2009 11:20 am
- Location: Winnipeg, Manituba
Re: Rebuild 83 front forks parts list
Costs keep going up. I'm trying to do it right, but I am also hoping to have enough left to try a C5 on this one.
Whatever I suggest here should be given ample time for a moderator to delicately correct. I apologize in advance.
77 WING, 1200 engine with 77 heads, cams, gl1100 foot pegs, Magna V65 front end, 764A carbs, [-gone Suzuki M109 monoshock--, replaced with gl1100 shocks] gl 1200 swing arm, gl1500 final drive, wheel and rear brakes Valkyrie seat, Meanstreak tank, Sportster pipes, Power Arc ignition off crank.
77 Wing. black
83 Wing, in pieces
"Continuing education is important even if the subject matter is fairly useless (as in this case)."---Greg Foresi
77 WING, 1200 engine with 77 heads, cams, gl1100 foot pegs, Magna V65 front end, 764A carbs, [-gone Suzuki M109 monoshock--, replaced with gl1100 shocks] gl 1200 swing arm, gl1500 final drive, wheel and rear brakes Valkyrie seat, Meanstreak tank, Sportster pipes, Power Arc ignition off crank.
77 Wing. black
83 Wing, in pieces
"Continuing education is important even if the subject matter is fairly useless (as in this case)."---Greg Foresi
- robin1731
- Membership Admin
- Posts: 21729
- Joined: Mon May 29, 2006 8:31 am
- Location: Decatur, Indiana
Re: Rebuild 83 front forks parts list
ericheath wrote:Costs keep going up. I'm trying to do it right, but I am also hoping to have enough left to try a C5 on this one.
It's only money. Can't take it with you.
1976 Goldwing Super Sport
1985 Honda Elite
1976 KZ900 Dragbike
1992 ZX7 Dragbike (KZ900 style motor w/NOS)
and a rotation of various purchases
Randakk approved Carb Rebuilder
1985 Honda Elite
1976 KZ900 Dragbike
1992 ZX7 Dragbike (KZ900 style motor w/NOS)
and a rotation of various purchases
Randakk approved Carb Rebuilder
- ericheath
- Honored Life Member
- Posts: 9581
- Joined: Wed Jul 29, 2009 11:20 am
- Location: Winnipeg, Manituba
Re: Rebuild 83 front forks parts list
I hadn't noticed before, but it appears the 83 had the TRAC on both forks? The Magna forks just did one side, hence JBz comments are true. It looks like a good $100 to rebuild them, nearly another $100 for springs.grrrr
Whatever I suggest here should be given ample time for a moderator to delicately correct. I apologize in advance.
77 WING, 1200 engine with 77 heads, cams, gl1100 foot pegs, Magna V65 front end, 764A carbs, [-gone Suzuki M109 monoshock--, replaced with gl1100 shocks] gl 1200 swing arm, gl1500 final drive, wheel and rear brakes Valkyrie seat, Meanstreak tank, Sportster pipes, Power Arc ignition off crank.
77 Wing. black
83 Wing, in pieces
"Continuing education is important even if the subject matter is fairly useless (as in this case)."---Greg Foresi
77 WING, 1200 engine with 77 heads, cams, gl1100 foot pegs, Magna V65 front end, 764A carbs, [-gone Suzuki M109 monoshock--, replaced with gl1100 shocks] gl 1200 swing arm, gl1500 final drive, wheel and rear brakes Valkyrie seat, Meanstreak tank, Sportster pipes, Power Arc ignition off crank.
77 Wing. black
83 Wing, in pieces
"Continuing education is important even if the subject matter is fairly useless (as in this case)."---Greg Foresi
-
- Silver Member
- Posts: 796
- Joined: Sun Jul 27, 2014 5:08 pm
- Location: Indiana
Re: Rebuild 83 front forks parts list
ericheath wrote:I hadn't noticed before, but it appears the 83 had the TRAC on both forks? The Magna forks just did one side, hence JBz comments are true. It looks like a good $100 to rebuild them, nearly another $100 for springs.grrrr
My 83 has the TRAC on both forks and yeah the cost can add up quick but it's best to do it right the first time...... which is what I should've done with mine. I rebuilt the TRAC system and got it working properly on mine as well as replaced the fork seals but I got cheap and didn't replace any of the slider bushings and I now wish I had because I'll probably be taking them apart again to do so.
Scott
- ericheath
- Honored Life Member
- Posts: 9581
- Joined: Wed Jul 29, 2009 11:20 am
- Location: Winnipeg, Manituba
Re: Rebuild 83 front forks parts list
Thanks for that. That's what I hope to avoid. I am going to order all suggested then decide in the stuff inside the Trac mechanism when I pull it apart.
Whatever I suggest here should be given ample time for a moderator to delicately correct. I apologize in advance.
77 WING, 1200 engine with 77 heads, cams, gl1100 foot pegs, Magna V65 front end, 764A carbs, [-gone Suzuki M109 monoshock--, replaced with gl1100 shocks] gl 1200 swing arm, gl1500 final drive, wheel and rear brakes Valkyrie seat, Meanstreak tank, Sportster pipes, Power Arc ignition off crank.
77 Wing. black
83 Wing, in pieces
"Continuing education is important even if the subject matter is fairly useless (as in this case)."---Greg Foresi
77 WING, 1200 engine with 77 heads, cams, gl1100 foot pegs, Magna V65 front end, 764A carbs, [-gone Suzuki M109 monoshock--, replaced with gl1100 shocks] gl 1200 swing arm, gl1500 final drive, wheel and rear brakes Valkyrie seat, Meanstreak tank, Sportster pipes, Power Arc ignition off crank.
77 Wing. black
83 Wing, in pieces
"Continuing education is important even if the subject matter is fairly useless (as in this case)."---Greg Foresi
- JBz
- SUPER BIKER!!!!
- Posts: 3070
- Joined: Wed Jan 31, 2007 8:11 pm
- Location: dayton nv
Re: Rebuild 83 front forks parts list
if you are real careful the trac systym shouldn't need any parts other than the dust seals and you should be able to reuse the rubber gaskets. If you take it apart to get the grunge out of the bottom the allens are usually locktited and stiff to get out.Be careful you don't loose the small spring and checkball for the 1 to 4 adjuster. If the 1 to 4 adjuster doesnt have a click or you feel a detent between 1 and 4 that means they are not in there...... and the trac wont work properly. high mileage id replace the bushings and get off to other things. I could live without the progressive springs . jb
jbz........... Thinkin about sh-t too hard and You wont get anything done
- ericheath
- Honored Life Member
- Posts: 9581
- Joined: Wed Jul 29, 2009 11:20 am
- Location: Winnipeg, Manituba
Re: Rebuild 83 front forks parts list
Then springs feel pretty tired. Will air be enough to make it ride decently
Whatever I suggest here should be given ample time for a moderator to delicately correct. I apologize in advance.
77 WING, 1200 engine with 77 heads, cams, gl1100 foot pegs, Magna V65 front end, 764A carbs, [-gone Suzuki M109 monoshock--, replaced with gl1100 shocks] gl 1200 swing arm, gl1500 final drive, wheel and rear brakes Valkyrie seat, Meanstreak tank, Sportster pipes, Power Arc ignition off crank.
77 Wing. black
83 Wing, in pieces
"Continuing education is important even if the subject matter is fairly useless (as in this case)."---Greg Foresi
77 WING, 1200 engine with 77 heads, cams, gl1100 foot pegs, Magna V65 front end, 764A carbs, [-gone Suzuki M109 monoshock--, replaced with gl1100 shocks] gl 1200 swing arm, gl1500 final drive, wheel and rear brakes Valkyrie seat, Meanstreak tank, Sportster pipes, Power Arc ignition off crank.
77 Wing. black
83 Wing, in pieces
"Continuing education is important even if the subject matter is fairly useless (as in this case)."---Greg Foresi
- JBz
- SUPER BIKER!!!!
- Posts: 3070
- Joined: Wed Jan 31, 2007 8:11 pm
- Location: dayton nv
Re: Rebuild 83 front forks parts list
5 or 6psi of air makes a world of difference but I believe the normal setting is much higher than that for the 1100s.............You would have to play with it......jbericheath wrote:Then springs feel pretty tired. Will air be enough to make it ride decently
jbz........... Thinkin about sh-t too hard and You wont get anything done
- chewy999
- SUPER BIKER!!!!
- Posts: 3214
- Joined: Tue Oct 16, 2012 11:21 am
- Location: Haddenham, Cambs, UK
Re: Rebuild 83 front forks parts list
It is amazing how prices stack up, but if you strip it down and do everything properly, you will have peace of mind, and hopefully will last years! That's the problem with old bikes, everything will need changing eventually!
Previous Rides,
1980 CB250N Good to learn on
1981 CX500 good mid range tourer, went to Austria on it!
1983 GL1100C Pride and joy, sold when I bought my 1st house, big mistake
1985 GL650 Silverwing another mistake, horrible bike
1986 CBX550 Good commuter
1989 Suzuki GS750 (1976) cheap and cheerful until a dog ran out in front of me on Xmas Eve, 1991
Current bikes
2010 CB1300 back on a bike after 19 years, two divorces, children grown up etc
1980 GL1100 NOW ON THE ROAD, still use CB1300.
1980 CB250N Good to learn on
1981 CX500 good mid range tourer, went to Austria on it!
1983 GL1100C Pride and joy, sold when I bought my 1st house, big mistake
1985 GL650 Silverwing another mistake, horrible bike
1986 CBX550 Good commuter
1989 Suzuki GS750 (1976) cheap and cheerful until a dog ran out in front of me on Xmas Eve, 1991
Current bikes
2010 CB1300 back on a bike after 19 years, two divorces, children grown up etc
1980 GL1100 NOW ON THE ROAD, still use CB1300.
-
- Similar Topics
- Replies
- Views
- Last post