Speedometer and tachometer cushions
Moderators: CYBORG, Oldewing, robin1731, Forum Moderators
- tlbranth
- Platinum Member
- Posts: 1636
- Joined: Mon Jan 28, 2008 12:16 am
- Location: carnation, wa
Speedometer and tachometer cushions
I read a thread back a while ago, which I can't find now, where someone had found that a later goldwing cushion (the soft rubber gasket between top and bottom) would fit the earlier gauges. So I went looking and the oldest GW I can find with the cushion available is a 1980 GL1100. Anyone know if this will fit a '75 GL1000?
Terry
Don't own a Vanagon
Don't work at Boeing
Life is good
1999 GL1500 SE
2002 Honda VT750 "ACE"
1975 GL1000
1970 CB750
Don't own a Vanagon
Don't work at Boeing
Life is good
1999 GL1500 SE
2002 Honda VT750 "ACE"
1975 GL1000
1970 CB750
- flyin900
- Gold Member
- Posts: 1489
- Joined: Sun Jan 10, 2010 3:50 pm
- Location: Canada
Re: Speedometer and tachometer cushions
The cushions for those GL1100 bikes and the early 1980's CB900C's should be a direct fit into the GL1000 chrome gauge holder. I have used the CB900C ones in my 1976 GL1000, since I have lots of spare gauges from those CB models.
Current Bikes:
1966 CL77 - Honda 305cc - Dual purpose - "Gentleman's Scrambler" was a period moniker.
1967 CL175K0 - Low production number with #802 engine serial- winter 2019/2020 full restoration.
1972 CB350F - Baby Four with low mileage - Cosmetic refresh to the next level 2021/2022.
1978 CB550K - Very original bike with only 7499 Km. from new - light cleanup and refresh done.
1983 CB1100F - Canadian model - DOHC Supersport in pristine low kilometre condition from new.
1984 GL1200 - Standard model in showroom condition - two owner bike from new.
1984 CX650E - Restored summer 2017 - a rare Eurosport model - excellent one owner bike.
1966 CL77 - Honda 305cc - Dual purpose - "Gentleman's Scrambler" was a period moniker.
1967 CL175K0 - Low production number with #802 engine serial- winter 2019/2020 full restoration.
1972 CB350F - Baby Four with low mileage - Cosmetic refresh to the next level 2021/2022.
1978 CB550K - Very original bike with only 7499 Km. from new - light cleanup and refresh done.
1983 CB1100F - Canadian model - DOHC Supersport in pristine low kilometre condition from new.
1984 GL1200 - Standard model in showroom condition - two owner bike from new.
1984 CX650E - Restored summer 2017 - a rare Eurosport model - excellent one owner bike.
- tlbranth
- Platinum Member
- Posts: 1636
- Joined: Mon Jan 28, 2008 12:16 am
- Location: carnation, wa
Re: Speedometer and tachometer cushions
Thanks Fly. I'll add a couple of those for a 1980 GL1100 to my OEM order.
Terry
Don't own a Vanagon
Don't work at Boeing
Life is good
1999 GL1500 SE
2002 Honda VT750 "ACE"
1975 GL1000
1970 CB750
Don't own a Vanagon
Don't work at Boeing
Life is good
1999 GL1500 SE
2002 Honda VT750 "ACE"
1975 GL1000
1970 CB750
-
- Tin Member
- Posts: 10
- Joined: Mon Jul 23, 2012 1:21 am
- Location: Duncan, BC
Re: Speedometer and tachometer cushions
I know this is an old thread. but I will try anyway.
So Terry, did the cushions from the 82 Goldwing work?
So Terry, did the cushions from the 82 Goldwing work?
- tlbranth
- Platinum Member
- Posts: 1636
- Joined: Mon Jan 28, 2008 12:16 am
- Location: carnation, wa
Re: Speedometer and tachometer cushions
Yes they did. They look identical to the originals to me. But I think they were '80 not '82.
Terry
Don't own a Vanagon
Don't work at Boeing
Life is good
1999 GL1500 SE
2002 Honda VT750 "ACE"
1975 GL1000
1970 CB750
Don't own a Vanagon
Don't work at Boeing
Life is good
1999 GL1500 SE
2002 Honda VT750 "ACE"
1975 GL1000
1970 CB750
-
- Tin Member
- Posts: 10
- Joined: Mon Jul 23, 2012 1:21 am
- Location: Duncan, BC
Re: Speedometer and tachometer cushions
Yes, 1980, sorry. That is good to know. Thanks.
- andorragl
- Cast Iron Member
- Posts: 81
- Joined: Fri Sep 27, 2013 5:55 pm
- Location: Andorra
Re: Speedometer and tachometer cushions
I Mounted oem honda ref 37235-323-700 still available. Perfect fit.
- Attachments
-
- 37235-323-700.jpg (23.45 KiB) Viewed 543 times
1976 GL1000 LTD
1995 VT1100C2 ACE
2003 CB1300F1 SUPER FOUR
1995 VT1100C2 ACE
2003 CB1300F1 SUPER FOUR
-
- Tin Member
- Posts: 10
- Joined: Mon Jul 23, 2012 1:21 am
- Location: Duncan, BC
Re: Speedometer and tachometer cushions
Good to know, thanks.
- flyday58
- Chrome Member
- Posts: 184
- Joined: Tue Mar 19, 2019 11:03 am
- Location: Cloudcroft NM
Re: Speedometer and tachometer cushions
A quick bump. I verified these cushions also fit my 1981 CB750C.
2005 BMW R1200GS
2008 BMW R1200RT
1988 Honda XR600R
1974 Yamaha GT80
2008 BMW R1200RT
1988 Honda XR600R
1974 Yamaha GT80
-
- Silver Member
- Posts: 654
- Joined: Fri May 26, 2017 11:07 am
Re: Speedometer and tachometer cushions
I like these parts places that show all usage, as long as you can find a part number. https://www.partzilla.com/product/honda ... 35-323-700
- flyday58
- Chrome Member
- Posts: 184
- Joined: Tue Mar 19, 2019 11:03 am
- Location: Cloudcroft NM
Re: Speedometer and tachometer cushions
Exactly. I sort of prefer Bike Bandit because they keep you informed, free shipping after $99, but their search interface is clunky (I told them they should address that), and they only tell you that there's one part per assembly, even if it actually requires 4 or 16 or whatever. Partzilla has cheaper prices and usually they show all parts in the diagram and how many you need per assembly, but $149 to get free shipping and they don't keep me up-to-date.
2005 BMW R1200GS
2008 BMW R1200RT
1988 Honda XR600R
1974 Yamaha GT80
2008 BMW R1200RT
1988 Honda XR600R
1974 Yamaha GT80
-
- Billet Alum. Member
- Posts: 278
- Joined: Thu Jun 07, 2018 8:30 am
Re: Speedometer and tachometer cushions
I just redid my GL1000 gauges and got the cushions from Partzilla. Cheap price compared to what I paid for my CB750 gauge cushions several years ago. The cushions Partzilla fit well.
-P.
-P.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 11 Replies
- 789 Views
-
Last post by OldRider2
-
- 3 Replies
- 465 Views
-
Last post by OldRider2
-
- 4 Replies
- 230 Views
-
Last post by maintainer
-
- 3 Replies
- 227 Views
-
Last post by Lucien Harpress