Are the valve clearance values for the '76 GL1000 intake and exhaust different in the shop manual? They all show 0.1 mm in the Clymer, but they are different in Octane's procedure: 0.1 mm intake and 0.13 mm exhaust...
https://www.ngwclub.com/forum/viewtopic.php?f=22&t=7436
Can anyone recommend an updated link to the .pdf of the '76 GL1000 shop manual? Thank you!
Shop manual and valve clearance
Moderators: CYBORG, Oldewing, robin1731, Forum Moderators
-
odyssey
- Chrome Member
- Posts: 133
- Joined: Wed Dec 14, 2016 10:04 am
- Location: Quincy, MA
Shop manual and valve clearance
Past rides:
'72 Vespa Rally 180, Honda Elite 125, Suzuki TU 250, Yamaha XT 600, Suzuki DR 650, Nighthawk 750
Current: '76 GL1000
'72 Vespa Rally 180, Honda Elite 125, Suzuki TU 250, Yamaha XT 600, Suzuki DR 650, Nighthawk 750
Current: '76 GL1000
-
jdvorchak
- Honored Life Member
- Posts: 5238
- Joined: Mon May 25, 2009 8:01 pm
- Location: East Alton, IL
Re: Shop manual and valve clearance
I see .1 mm ( .004 in ) for intake and exhaust measured cold in the Honda GL1000 Factory Service manual.
New users please visit our "Shop Talk" for common tips and help:
http://ngwclub.com/forum/page/ST
Don't fix it 'til it's broke...
The person with the most toys wins!
If it has wheels or a skirt you can't afford it.
Amateur Radio Station WW9L
71 CL350 with Bingham side car
2021 HD Triglide
2008 HD Dyna Low Rider
83 KZ1100L1 Son totaled it
83 KZ550LTD Shaft sold
Previous bikes: 84 GL1200 STD, 83 KZ550LTD, 83 CB1000, 78 CB400A, 82 CB900F, 79 CB750K, 2001 GL1800, 2000 Dyna Super Glide, 1972 CB350 K4, 1985 GL1200A, 1997 1200 Sportster, 84 GL1200I, 82 Honda CM400E, 81 Suzuki GS650L, 72 Triumph Bonneville 750, 72 Honda CB350, 66(?) Honda 305 Scrambler, 6? Yamaha yz250, 62 650 Matchless (Norton-Villers).
John
http://ngwclub.com/forum/page/ST
Don't fix it 'til it's broke...
The person with the most toys wins!
If it has wheels or a skirt you can't afford it.
Amateur Radio Station WW9L
71 CL350 with Bingham side car
2021 HD Triglide
2008 HD Dyna Low Rider
83 KZ1100L1 Son totaled it
83 KZ550LTD Shaft sold
Previous bikes: 84 GL1200 STD, 83 KZ550LTD, 83 CB1000, 78 CB400A, 82 CB900F, 79 CB750K, 2001 GL1800, 2000 Dyna Super Glide, 1972 CB350 K4, 1985 GL1200A, 1997 1200 Sportster, 84 GL1200I, 82 Honda CM400E, 81 Suzuki GS650L, 72 Triumph Bonneville 750, 72 Honda CB350, 66(?) Honda 305 Scrambler, 6? Yamaha yz250, 62 650 Matchless (Norton-Villers).
John
-
Whiskerfish
- President
- Posts: 36936
- Joined: Thu Feb 16, 2006 9:34 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/whiskerfish/
- Location: Norfolk Va
Re: Shop manual and valve clearance
Yea 1000 are .004" intake and exhaust. I believe the 1100 went to .005" on the exhaust.
"Agreement is not a requirement for Respect" CDR Michael Smith USN (Ret) 2017
"The book is wrong, this whole Conclusion is Fallacious" River Tam
"Yea I do dance awkwardly, and I am having more fun than you" Taylor Swift
2008 GL1800 IIIA "TH3DOG"
1984 GL1200 Standard
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
Psst. oh and by the way CHANGE YOUR BELTS!!!!
"The book is wrong, this whole Conclusion is Fallacious" River Tam
"Yea I do dance awkwardly, and I am having more fun than you" Taylor Swift
2008 GL1800 IIIA "TH3DOG"
1984 GL1200 Standard
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
Psst. oh and by the way CHANGE YOUR BELTS!!!!
-
Track T 2411
- Honored Life Member
- Posts: 8511
- Joined: Thu May 29, 2008 9:37 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
- Location: Prairie du Sac Wisconsin
Re: Shop manual and valve clearance
+1Whiskerfish wrote:Yea 1000 are .004" intake and exhaust. I believe the 1100 went to .005" on the exhaust.
"I have no special talent. I am only passionately curious." - Albert Einstein
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
-
robin1731
- Membership Admin
- Posts: 21729
- Joined: Mon May 29, 2006 8:31 am
- Location: Decatur, Indiana
Re: Shop manual and valve clearance
A little looser on the exhaust won't hurt. Like the .005" that the 1100 calls for.
.
.
1976 Goldwing Super Sport
1985 Honda Elite
1976 KZ900 Dragbike
1992 ZX7 Dragbike (KZ900 style motor w/NOS)
and a rotation of various purchases
Randakk approved Carb Rebuilder
1985 Honda Elite
1976 KZ900 Dragbike
1992 ZX7 Dragbike (KZ900 style motor w/NOS)
and a rotation of various purchases
Randakk approved Carb Rebuilder
-
jdvorchak
- Honored Life Member
- Posts: 5238
- Joined: Mon May 25, 2009 8:01 pm
- Location: East Alton, IL
Re: Shop manual and valve clearance
I noticed that starting in about 1978 the other metric bikes went to larger clearance on the exhaust. But they were air cooled engines. The goldwing is of course liquid cooled so Honda probably didn't feel it necessary for that first model.robin1731 wrote:A little looser on the exhaust won't hurt. Like the .005" that the 1100 calls for.
.
New users please visit our "Shop Talk" for common tips and help:
http://ngwclub.com/forum/page/ST
Don't fix it 'til it's broke...
The person with the most toys wins!
If it has wheels or a skirt you can't afford it.
Amateur Radio Station WW9L
71 CL350 with Bingham side car
2021 HD Triglide
2008 HD Dyna Low Rider
83 KZ1100L1 Son totaled it
83 KZ550LTD Shaft sold
Previous bikes: 84 GL1200 STD, 83 KZ550LTD, 83 CB1000, 78 CB400A, 82 CB900F, 79 CB750K, 2001 GL1800, 2000 Dyna Super Glide, 1972 CB350 K4, 1985 GL1200A, 1997 1200 Sportster, 84 GL1200I, 82 Honda CM400E, 81 Suzuki GS650L, 72 Triumph Bonneville 750, 72 Honda CB350, 66(?) Honda 305 Scrambler, 6? Yamaha yz250, 62 650 Matchless (Norton-Villers).
John
http://ngwclub.com/forum/page/ST
Don't fix it 'til it's broke...
The person with the most toys wins!
If it has wheels or a skirt you can't afford it.
Amateur Radio Station WW9L
71 CL350 with Bingham side car
2021 HD Triglide
2008 HD Dyna Low Rider
83 KZ1100L1 Son totaled it
83 KZ550LTD Shaft sold
Previous bikes: 84 GL1200 STD, 83 KZ550LTD, 83 CB1000, 78 CB400A, 82 CB900F, 79 CB750K, 2001 GL1800, 2000 Dyna Super Glide, 1972 CB350 K4, 1985 GL1200A, 1997 1200 Sportster, 84 GL1200I, 82 Honda CM400E, 81 Suzuki GS650L, 72 Triumph Bonneville 750, 72 Honda CB350, 66(?) Honda 305 Scrambler, 6? Yamaha yz250, 62 650 Matchless (Norton-Villers).
John
-
CYBORG
- Moderator
- Posts: 24552
- Joined: Mon Jan 14, 2008 12:52 pm
- Location: Muskegon mich
Re: Shop manual and valve clearance
Just did the valves on a 75 . Set them all at .004, and it runs great.......and no valve noise
1978 custom GL1000
1977 custom with 1200 engine
1985 gl1200
1977 custom with 1200 engine
1985 gl1200
-
- Similar Topics
- Replies
- Views
- Last post