I lost one of my collets that connect the engine block to the oil filter housing [transmission front cover ] and back to the oil pump. A good picture of where the part goes is here http://www.randakksblog.com/tag/gl1000- ... placement/
I feel like an idiot because I could not locate the correct parts fiche on the honda parts fiche. Can anyone supply me with the correct fiche page link or at least the part number of the collet? I already have the o-rings that i need.
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson! New2U Bike? Read Me.
I think it's 45 in the illustration. They give the dimensions so if you measure the hole you should be able to figure out which one is correct.
.......Paul
I prefer to ride my wing naked,thank you
My wife asked me "How many bikes does one man need?" My answer "Uhhh.just one more"
75 Goldwing
78 Goldwing
77 CB750a
77 CB550f
80 CB650c
05 Boule C50
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson! New2U Bike? Read Me.
It is listed as a collar, 17x10 , so I will measure it and convert to millimeters. I am sure that the diameter is the same, but not the length. The one I do have came off the end of the oil pump...
The CMSL page for the block does have a matching collar 17x10 on the engine block page, although I am having trouble finding it in the schematic due to my computer needing an update. Listing on line 45
because I could not locate the correct parts fiche on the honda parts fiche. Can anyone supply me with the correct fiche page link or at least the part number of the collet? I already have the o-rings that i need.
