Track there is another option with a Permatex product that can be used to seal that area and is gas resistant with no need to mess with epoxy style fixes. It says it is equivalent to Hylomar Blue which I can attest to its abilities. It is non hardening and will remove easily again, if you need to rebuild the carbs again in the future.
Part # 85420
Flat spot at 3500 RPM's
Moderators: CYBORG, Oldewing, robin1731, Forum Moderators
- flyin900
- Gold Member
- Posts: 1489
- Joined: Sun Jan 10, 2010 3:50 pm
- Location: Canada
Re: Flat spot at 3500 RPM's
Current Bikes:
1966 CL77 - Honda 305cc - Dual purpose - "Gentleman's Scrambler" was a period moniker.
1967 CL175K0 - Low production number with #802 engine serial- winter 2019/2020 full restoration.
1972 CB350F - Baby Four with low mileage - Cosmetic refresh to the next level 2021/2022.
1978 CB550K - Very original bike with only 7499 Km. from new - light cleanup and refresh done.
1983 CB1100F - Canadian model - DOHC Supersport in pristine low kilometre condition from new.
1984 GL1200 - Standard model in showroom condition - two owner bike from new.
1984 CX650E - Restored summer 2017 - a rare Eurosport model - excellent one owner bike.
1966 CL77 - Honda 305cc - Dual purpose - "Gentleman's Scrambler" was a period moniker.
1967 CL175K0 - Low production number with #802 engine serial- winter 2019/2020 full restoration.
1972 CB350F - Baby Four with low mileage - Cosmetic refresh to the next level 2021/2022.
1978 CB550K - Very original bike with only 7499 Km. from new - light cleanup and refresh done.
1983 CB1100F - Canadian model - DOHC Supersport in pristine low kilometre condition from new.
1984 GL1200 - Standard model in showroom condition - two owner bike from new.
1984 CX650E - Restored summer 2017 - a rare Eurosport model - excellent one owner bike.
- Track T 2411
- Honored Life Member
- Posts: 8511
- Joined: Thu May 29, 2008 9:37 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
- Location: Prairie du Sac Wisconsin
Re: Flat spot at 3500 RPM's
Thanks for the info. I'm weighing my options. I like the idea of epoxy as it would seem to be a more permanent fix. Just not sure what product to use...
"I have no special talent. I am only passionately curious." - Albert Einstein
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 3 Replies
- 1279 Views
-
Last post by Hukmut
-
- 5 Replies
- 679 Views
-
Last post by Bloodhound
-
- 13 Replies
- 782 Views
-
Last post by Steven UK
-
- 13 Replies
- 632 Views
-
Last post by Cakey
-
- 7 Replies
- 404 Views
-
Last post by chewy999