70's show bike refurbished; IT IS FINALLY DONE
Moderators: Whiskerfish, ascot, Forum Moderators
- robin1731
- Membership Admin
- Posts: 21724
- Joined: Mon May 29, 2006 8:31 am
- Location: Decatur, Indiana
70's show bike refurbished; IT IS FINALLY DONE
Back story. A guy in town bought a 1978 KZ1000 new in 78. Took it down to bare frame. Painted frame what is called Ice Blue. Painted the tins Black with some other colors and then later on Silver with some other colors. Also painted the engine black. Made some very minor mods to the engine. Won some trophy's at some near by car shows.
He passed away several years ago. His younger brother ended up with the bike. When he got it the entire bike was in boxes. Including the engine. It sat like that for over 20 years.
About 2 months ago he contacted me about completely redoing the bike. I set him up with my painter for the frame and the tins. I am doing the rest.
I completed the engine just today. Complete tear down, power washed, bead blasted, power washed again. Then reassembled replacing some transmission parts. That was all the bottom end needed. Honed the cylinders and put new rings on the pistons. (It doesn't have many miles on it as it was trailered most of the time.) He did want some light port work done to the head and some bigger, drop in, cams installed. The head also got a valve job and was surfaced.
I painted the engine with PJ1 high temp gloss paint. I hate painting engines but this came out pretty good. All the engine covers are still at the chrome shop. Along with the wheels, swing arm, front forks and a lot of other parts. You can see in the pics the four outside head nuts he had gold plated. That was just the way his brother did it and he wanted the same. There will be some other gold plated parts on the frame too.
The frame is finished at the painters but I can't do much with it until some of the chrome gets here.
This is one of those big time consuming jobs that I usually do in the winter but he wanted to get it in. (Remember he has had it in boxes for 20+ years }
I'll add to this as I get more complete. It will be some time though. And I have been doing other work too as it filters in. Three sets of GL carbs in the last three weeks and at least two more sets on the way that I know of.
Oh, there are no pics of the boxes of parts. He brought over just the engine parts first. I did help him go through stuff to decide what to paint, what to chrome, what to keep, and what needed replaced. It will get all new wiring harness, gauges, controls. A lot. He will easily have 5 figures in this. Worth that to him though.
He passed away several years ago. His younger brother ended up with the bike. When he got it the entire bike was in boxes. Including the engine. It sat like that for over 20 years.
About 2 months ago he contacted me about completely redoing the bike. I set him up with my painter for the frame and the tins. I am doing the rest.
I completed the engine just today. Complete tear down, power washed, bead blasted, power washed again. Then reassembled replacing some transmission parts. That was all the bottom end needed. Honed the cylinders and put new rings on the pistons. (It doesn't have many miles on it as it was trailered most of the time.) He did want some light port work done to the head and some bigger, drop in, cams installed. The head also got a valve job and was surfaced.
I painted the engine with PJ1 high temp gloss paint. I hate painting engines but this came out pretty good. All the engine covers are still at the chrome shop. Along with the wheels, swing arm, front forks and a lot of other parts. You can see in the pics the four outside head nuts he had gold plated. That was just the way his brother did it and he wanted the same. There will be some other gold plated parts on the frame too.
The frame is finished at the painters but I can't do much with it until some of the chrome gets here.
This is one of those big time consuming jobs that I usually do in the winter but he wanted to get it in. (Remember he has had it in boxes for 20+ years }
I'll add to this as I get more complete. It will be some time though. And I have been doing other work too as it filters in. Three sets of GL carbs in the last three weeks and at least two more sets on the way that I know of.
Oh, there are no pics of the boxes of parts. He brought over just the engine parts first. I did help him go through stuff to decide what to paint, what to chrome, what to keep, and what needed replaced. It will get all new wiring harness, gauges, controls. A lot. He will easily have 5 figures in this. Worth that to him though.
- Attachments
-
- DSCN1285.JPG (233.51 KiB) Viewed 1796 times
-
- DSCN1286.JPG (216.65 KiB) Viewed 1796 times
-
- DSCN1287.JPG (213.94 KiB) Viewed 1796 times
-
- DSCN1288.JPG (206.35 KiB) Viewed 1796 times
-
- DSCN1289.JPG (222.18 KiB) Viewed 1796 times
1976 Goldwing Super Sport
1985 Honda Elite
1976 KZ900 Dragbike
1992 ZX7 Dragbike (KZ900 style motor w/NOS)
and a rotation of various purchases
Randakk approved Carb Rebuilder
1985 Honda Elite
1976 KZ900 Dragbike
1992 ZX7 Dragbike (KZ900 style motor w/NOS)
and a rotation of various purchases
Randakk approved Carb Rebuilder
- Whiskerfish
- President
- Posts: 36852
- Joined: Thu Feb 16, 2006 9:34 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/whiskerfish/
- Location: Norfolk Va
Re: 70's show bike refurbished; The beginning
Ya got to love spending someone else's money
"Agreement is not a requirement for Respect" CDR Michael Smith USN (Ret) 2017
"The book is wrong, this whole Conclusion is Fallacious" River Tam
2008 GL1800 IIIA "TH3DOG"
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
and a whole garage full of possibilities!!
Psst. oh and by the way CHANGE YOUR BELTS!!!!
"The book is wrong, this whole Conclusion is Fallacious" River Tam
2008 GL1800 IIIA "TH3DOG"
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
and a whole garage full of possibilities!!
Psst. oh and by the way CHANGE YOUR BELTS!!!!
- desertrefugee
- SUPER BIKER!!!!
- Posts: 3947
- Joined: Fri Nov 11, 2011 9:33 pm
- Location: Chandler, AZ, USA
Re: 70's show bike refurbished; The beginning
Yeah, but that's what I'm talking about! Finally, we again get to see some of Robin's work detailed on these pages. It's about time!
- Life is not about waiting for the storms to pass. It's about learning to ride in the rain.
- Lucien Harpress
- Honored Life Member
- Posts: 4077
- Joined: Sat Dec 24, 2011 11:41 am
- Location: Michigan
Re: 70's show bike refurbished; The beginning
1997 Valkyrie- Light Cutomization, but Too Busy Riding
1980 KZ1300- Bike's Haunted
1976 GL1000 (Yellow)- It Runs (Poorly) and Doesn't Leak (Mostly)
1974 Velosolex 3800- Better Than Walking
1972 CB750- Broke the Chain And Ate the Motor
1969 CT90- The Most Fun You Can Have on 90ccs.
1965 CA77 Dream- Needs a Full Teardown, but Complete
All advice I give is only valid until an expert corrects me.
1980 KZ1300- Bike's Haunted
1976 GL1000 (Yellow)- It Runs (Poorly) and Doesn't Leak (Mostly)
1974 Velosolex 3800- Better Than Walking
1972 CB750- Broke the Chain And Ate the Motor
1969 CT90- The Most Fun You Can Have on 90ccs.
1965 CA77 Dream- Needs a Full Teardown, but Complete
All advice I give is only valid until an expert corrects me.
- robin1731
- Membership Admin
- Posts: 21724
- Joined: Mon May 29, 2006 8:31 am
- Location: Decatur, Indiana
Re: 70's show bike refurbished; The beginning
desertrefugee wrote: ↑Sun Sep 06, 2020 5:27 pm Yeah, but that's what I'm talking about! Finally, we again get to see some of Robin's work detailed on these pages. It's about time!
LOL, it has been awhile. There just hasn't been one worth showing till now.
.
1976 Goldwing Super Sport
1985 Honda Elite
1976 KZ900 Dragbike
1992 ZX7 Dragbike (KZ900 style motor w/NOS)
and a rotation of various purchases
Randakk approved Carb Rebuilder
1985 Honda Elite
1976 KZ900 Dragbike
1992 ZX7 Dragbike (KZ900 style motor w/NOS)
and a rotation of various purchases
Randakk approved Carb Rebuilder
-
- True Blue Steel Biker
- Posts: 2314
- Joined: Wed Apr 11, 2012 10:50 am
Re: 70's show bike refurbished; The beginning
I remember an article that said, back in the day, when you rolled a kz1000 full throttle, the bike tried to rotate the planet. Or something like that. Can’t wait for more updates.
Dave
1975 GL 1000
1980 XS650
1981 ct110
1972 F7 KAW 175
2000 moby blaze 40cc
Chihuahua (Ellie)
Chihuahua #2(Blaze)
1975 GL 1000
1980 XS650
1981 ct110
1972 F7 KAW 175
2000 moby blaze 40cc
Chihuahua (Ellie)
Chihuahua #2(Blaze)
- 5speed
- Honored Life Member
- Posts: 5311
- Joined: Sat Jul 11, 2015 2:37 pm
- Location: Nova Scotia Canada
Re: 70's show bike refurbished; The beginning
me too
1982 1100 standard. (sold)
1986 Yamaha FJ1200
2000 Yamaha Roadstar
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
2019 Can-Am ryker (boss's new ride)
2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
1986 Yamaha FJ1200
2000 Yamaha Roadstar
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
2019 Can-Am ryker (boss's new ride)
2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
- Rednaxs60
- Silver Member
- Posts: 974
- Joined: Mon Nov 30, 2015 11:14 pm
- Location: Victoria, BC, Canada
Re: 70's show bike refurbished; The beginning
Nice start. Even without doing my '85 Limited Edition to a show bike (engine being rebuilt and new/fresh paint job as one of my C-19 projects), keeping track of costs over a 5 year period is not for the faint of heart. It's an ever evolving project, would like to take it to the frame one day. Look forward to following your work. Cheers
"When writing the Story of your life, don't let anyone else hold the pen."
Ernest
1985 GL1200 Limited Edition
2014 Can-Am Spyder RT LE
2021 Royal Enfield Himalayan
1995 GL1500 SE CDN Edition (sold)
2012 Suzuki DL1000 VStrom (sold)
Ontario 1985 GL1200 Limited Edition (sold)
2008 GL1800 (sold)
Ernest
1985 GL1200 Limited Edition
2014 Can-Am Spyder RT LE
2021 Royal Enfield Himalayan
1995 GL1500 SE CDN Edition (sold)
2012 Suzuki DL1000 VStrom (sold)
Ontario 1985 GL1200 Limited Edition (sold)
2008 GL1800 (sold)
-
- Cast Iron Member
- Posts: 84
- Joined: Thu Jul 09, 2020 8:32 am
- Location: Comfort TX
Re: 70's show bike refurbished; The beginning
I'll be watching this one - I had a 73 Z1 in my early 20's - I'm lucky to still be alive - I've also had 4 KZ1000Ps - They are interesting Bikes
-
- Chrome Member
- Posts: 112
- Joined: Sat Mar 21, 2020 5:30 am
- Location: Arizona
Re: 70's show bike refurbished; The beginning
Nice work
1976 Goldwing GL-1000
1998 Royal Star 1300
2001 Honda Shadow Spirit 750
Past Bikes
1975 Kawasaki KZ400
1977 Goldwing GL-1000
1998 Royal Star 1300
2001 Honda Shadow Spirit 750
Past Bikes
1975 Kawasaki KZ400
1977 Goldwing GL-1000
- desertrefugee
- SUPER BIKER!!!!
- Posts: 3947
- Joined: Fri Nov 11, 2011 9:33 pm
- Location: Chandler, AZ, USA
Re: 70's show bike refurbished; The beginning
Try bringing a long-slumbering CBX back to life. (Can you say 2nd mortgage?)Rednaxs60 wrote: ↑Wed Sep 09, 2020 5:31 pm Nice start. Even without doing my '85 Limited Edition to a show bike (engine being rebuilt and new/fresh paint job as one of my C-19 projects), keeping track of costs over a 5 year period is not for the faint of heart. It's an ever evolving project, would like to take it to the frame one day. Look forward to following your work. Cheers
I'm really looking forward to this effort. The motor finish alone has me hooked. Then again, Robin comes in, posts a teaser and then slinks back into the shadows. I think it's time for another installment...
- Life is not about waiting for the storms to pass. It's about learning to ride in the rain.
- Rednaxs60
- Silver Member
- Posts: 974
- Joined: Mon Nov 30, 2015 11:14 pm
- Location: Victoria, BC, Canada
Re: 70's show bike refurbished; The beginning
But you love it! Robin does do good work. Nice looking engine. The game is afoot!
"When writing the Story of your life, don't let anyone else hold the pen."
Ernest
1985 GL1200 Limited Edition
2014 Can-Am Spyder RT LE
2021 Royal Enfield Himalayan
1995 GL1500 SE CDN Edition (sold)
2012 Suzuki DL1000 VStrom (sold)
Ontario 1985 GL1200 Limited Edition (sold)
2008 GL1800 (sold)
Ernest
1985 GL1200 Limited Edition
2014 Can-Am Spyder RT LE
2021 Royal Enfield Himalayan
1995 GL1500 SE CDN Edition (sold)
2012 Suzuki DL1000 VStrom (sold)
Ontario 1985 GL1200 Limited Edition (sold)
2008 GL1800 (sold)
- robin1731
- Membership Admin
- Posts: 21724
- Joined: Mon May 29, 2006 8:31 am
- Location: Decatur, Indiana
Re: 70's show bike refurbished; The beginning
Nothing to add. Remember back in the first post. "Waiting on chrome". When doing builds like this you are at the mercy of other people. Unlike the fake TV builds you have to wait on their schedule.desertrefugee wrote: ↑Sun Sep 20, 2020 1:22 pmTry bringing a long-slumbering CBX back to life. (Can you say 2nd mortgage?)Rednaxs60 wrote: ↑Wed Sep 09, 2020 5:31 pm Nice start. Even without doing my '85 Limited Edition to a show bike (engine being rebuilt and new/fresh paint job as one of my C-19 projects), keeping track of costs over a 5 year period is not for the faint of heart. It's an ever evolving project, would like to take it to the frame one day. Look forward to following your work. Cheers
I'm really looking forward to this effort. The motor finish alone has me hooked. Then again, Robin comes in, posts a teaser and then slinks back into the shadows. I think it's time for another installment...
The only thing I could do right now is put steering stem bearing races in the frame. But I told the owner I do 't even want that here until I can actually start putting things together. Too many other things in here to worry about a freshly painted frame.
It's been busy here though. This week alone I rebuilt two sets of GL1100 carbs and rebuilt and vapor blasted a set of KZ1000 carbs. That's a total of 8 sets of carb rebuilds in the last 5 weeks.
.
.
1976 Goldwing Super Sport
1985 Honda Elite
1976 KZ900 Dragbike
1992 ZX7 Dragbike (KZ900 style motor w/NOS)
and a rotation of various purchases
Randakk approved Carb Rebuilder
1985 Honda Elite
1976 KZ900 Dragbike
1992 ZX7 Dragbike (KZ900 style motor w/NOS)
and a rotation of various purchases
Randakk approved Carb Rebuilder
- robin1731
- Membership Admin
- Posts: 21724
- Joined: Mon May 29, 2006 8:31 am
- Location: Decatur, Indiana
Re: 70's show bike refurbished; The beginning
Guess what is back in the shop???!!!!!!!!!!!!!!!!!!
I'll get some pics later. Frame is here along with the swingarm and wheels.
Just noticed, I've been waiting on him for over two years.
I'll get some pics later. Frame is here along with the swingarm and wheels.
Just noticed, I've been waiting on him for over two years.
1976 Goldwing Super Sport
1985 Honda Elite
1976 KZ900 Dragbike
1992 ZX7 Dragbike (KZ900 style motor w/NOS)
and a rotation of various purchases
Randakk approved Carb Rebuilder
1985 Honda Elite
1976 KZ900 Dragbike
1992 ZX7 Dragbike (KZ900 style motor w/NOS)
and a rotation of various purchases
Randakk approved Carb Rebuilder
- 5speed
- Honored Life Member
- Posts: 5311
- Joined: Sat Jul 11, 2015 2:37 pm
- Location: Nova Scotia Canada
Re: 70's show bike refurbished; The beginning
waiting on the chrome for 2 years?
1982 1100 standard. (sold)
1986 Yamaha FJ1200
2000 Yamaha Roadstar
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
2019 Can-Am ryker (boss's new ride)
2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
1986 Yamaha FJ1200
2000 Yamaha Roadstar
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
2019 Can-Am ryker (boss's new ride)
2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
-
- Similar Topics
- Replies
- Views
- Last post
-
- 10 Replies
- 1318 Views
-
Last post by robin1731
-
- 9 Replies
- 2250 Views
-
Last post by gltriker
-
- 19 Replies
- 1197 Views
-
Last post by Track T 2411
-
- 2 Replies
- 398 Views
-
Last post by ritalz