New Project: no name (yet)
Moderators: Neil, redwood, rcmatt007, Forum Moderators
-
- Brass Member
- Posts: 27
- Joined: Sat Jan 14, 2012 10:37 pm
- Location: Deep South Louisiana
New Project: no name (yet)
First post here although I've been immersed in reading! I'm not new to bikes or building them but I've been wanting to attempt a off beat bike for some time and discovered wings! I have a few good leads on some 1200s and before to much longer I'll have one.
I currently own a Guzzi and have had many many in the past.
So my plan is to build a cross of sorts between a cafe and a sport (GL Cafe Sport) with a monoshock, Val tank and a sport bike type tail. Copper frame with cast iron matte paint on the body and blacked out drivetrain. I welcome oppinions on my choices of the direction I want to go..
I robbed a pic from here and edited to show my eventral end result. Stay tuned and I'll update the thread as my build begins:
I currently own a Guzzi and have had many many in the past.
So my plan is to build a cross of sorts between a cafe and a sport (GL Cafe Sport) with a monoshock, Val tank and a sport bike type tail. Copper frame with cast iron matte paint on the body and blacked out drivetrain. I welcome oppinions on my choices of the direction I want to go..
I robbed a pic from here and edited to show my eventral end result. Stay tuned and I'll update the thread as my build begins:
1977 GL1000
Full Custom!!!
Full Custom!!!
- ritalz
- Honored Life Member
- Posts: 4102
- Joined: Sat Jun 25, 2005 10:22 am
- Location: St Louis, MO
Re: New Project: no name (yet)
Check out the home page to see the bike of the month. It may be what you are looking to accomplich.
Al
2003 Goldwing Daily Rider
1975 Goldwing 'Max'
1984 Goldwing New Bagger Project
1976 Goldwing 'Grocery Getter' Sold
1985 Goldwing Interstate 'NCC-1985' sold
1981 Silverwing Sold
1982 Goldeing Project Sold
1981 Goldwing Parted Out
1983 Goldwing Project Sold
1973 CB500F Long Gone
1966 CL77 First Street Bike
http://www.ngwclub.com/gallery3/index.p ... ans/ritalz
2003 Goldwing Daily Rider
1975 Goldwing 'Max'
1984 Goldwing New Bagger Project
1976 Goldwing 'Grocery Getter' Sold
1985 Goldwing Interstate 'NCC-1985' sold
1981 Silverwing Sold
1982 Goldeing Project Sold
1981 Goldwing Parted Out
1983 Goldwing Project Sold
1973 CB500F Long Gone
1966 CL77 First Street Bike
http://www.ngwclub.com/gallery3/index.p ... ans/ritalz
- Neil
- Moderator
- Posts: 5667
- Joined: Tue Sep 09, 2008 3:34 pm
- Location: Davenport, Florida
Re: New Project: no name (yet)
Excellent .... we will be interested in watching this thread develop.
- sunnbobb
- Facebook Admin
- Posts: 21272
- Joined: Thu Jan 10, 2008 4:09 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/sunnbobb/
- Location: LaConner, WA
Re: New Project: no name (yet)
Welcome aboard. I moved your first post to the intro forum. Glad you could join us and look forward to seeing your build.
Sunny
Sunny
I found the end of the internet
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
-
- Platinum Member
- Posts: 1835
- Joined: Tue Sep 07, 2010 1:36 pm
- Location: Gainesville, GA
- Contact:
Re: New Project: no name (yet)
I like your photoshop version...the real deal will be awesome. Welcome from Georgia.
"Try to be the person your dog THINKS YOU ARE"
'75 Red Wing Now Greene and Tan
'76 Yellow Wing...Sold
'77 Blue Wing
'77 Red/black wing with side car...Sold
'79 Silver/black CBX...Sold
'81 CB1100RB Red and white...Sold
'06 Ducati MTS 1000DS...SOLD
'01 CBR1100XX Redbird
'75 Red Wing Now Greene and Tan
'76 Yellow Wing...Sold
'77 Blue Wing
'77 Red/black wing with side car...Sold
'79 Silver/black CBX...Sold
'81 CB1100RB Red and white...Sold
'06 Ducati MTS 1000DS...SOLD
'01 CBR1100XX Redbird
- GL1-242
- Honored Life Member
- Posts: 4012
- Joined: Sun May 07, 2006 12:09 am
- Location: Littleton, Colorado
Re: New Project: no name (yet)
Welcome,
Paul
Paul
84 GL1200 STD
75 GL1000 #202
75 GL1000 (AKA, GL1-242)(AKA, Flipper)
76 LTD
76/77 CB750F
Bultaco's = 121, 152, 167, 188
75 GL1000 #202
75 GL1000 (AKA, GL1-242)(AKA, Flipper)
76 LTD
76/77 CB750F
Bultaco's = 121, 152, 167, 188
- Casper
- SUPER BIKER!!!!
- Posts: 3339
- Joined: Sun Aug 07, 2011 9:54 am
- Location: Calgary, Canada
Re: New Project: no name (yet)
Welcome aboard, and howdy from Calgary. Great concept, keep us posted on your progress.
1976 LTD, Being Returned to Stock
Standard 1976 GL1000 Being Morphed into the Alberta Super Clipper
Standard 1976 GL1000 Being Morphed into the Alberta Super Clipper
- robin1731
- Membership Admin
- Posts: 21730
- Joined: Mon May 29, 2006 8:31 am
- Location: Decatur, Indiana
Re: New Project: no name (yet)
Welcome aboardfrom Indiana. Do some checking around on here. There is at least one mono-shock wing in progress.
1976 Goldwing Super Sport
1985 Honda Elite
1976 KZ900 Dragbike
1992 ZX7 Dragbike (KZ900 style motor w/NOS)
and a rotation of various purchases
Randakk approved Carb Rebuilder
1985 Honda Elite
1976 KZ900 Dragbike
1992 ZX7 Dragbike (KZ900 style motor w/NOS)
and a rotation of various purchases
Randakk approved Carb Rebuilder
- ericheath
- Honored Life Member
- Posts: 9581
- Joined: Wed Jul 29, 2009 11:20 am
- Location: Winnipeg, Manituba
Re: New Project: no name (yet)
A nice start to a 1200 with mono shock was just sold.
Whatever I suggest here should be given ample time for a moderator to delicately correct. I apologize in advance.
77 WING, 1200 engine with 77 heads, cams, gl1100 foot pegs, Magna V65 front end, 764A carbs, [-gone Suzuki M109 monoshock--, replaced with gl1100 shocks] gl 1200 swing arm, gl1500 final drive, wheel and rear brakes Valkyrie seat, Meanstreak tank, Sportster pipes, Power Arc ignition off crank.
77 Wing. black
83 Wing, in pieces
"Continuing education is important even if the subject matter is fairly useless (as in this case)."---Greg Foresi
77 WING, 1200 engine with 77 heads, cams, gl1100 foot pegs, Magna V65 front end, 764A carbs, [-gone Suzuki M109 monoshock--, replaced with gl1100 shocks] gl 1200 swing arm, gl1500 final drive, wheel and rear brakes Valkyrie seat, Meanstreak tank, Sportster pipes, Power Arc ignition off crank.
77 Wing. black
83 Wing, in pieces
"Continuing education is important even if the subject matter is fairly useless (as in this case)."---Greg Foresi
- rcmatt007
- Treasurer
- Posts: 31327
- Joined: Fri Oct 21, 2005 12:48 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/rcmatt007/
- Location: New River Valley, Virginia
Re: New Project: no name (yet)
welcome to ngw.... looks interesting
I might put heads on the engine before starting it though.... just a thought
I might put heads on the engine before starting it though.... just a thought
-Rodger-
all it takes for evil to prosper is the want of a few good men to do nothing-Edmund Burke
The question is not how much time do you have, it is what you do with the time that you have Gandalf
"One of the greatest dignities of humankind is that each successive generation is invested in the welfare of each new generation." Fred Rodgers
"it takes 10,000 hours to become an expert" ancient saying
78 constantly modified/customized since 1978, BOTM June 2015 de-evolving this very moment viewtopic.php?f=30&t=65511
76 Ltd "cookies bike" ALMOST DONE
79 project, finished, FOR SALE
'86 1200 (Beth's)(FOR SALE) with motorvation sidecar (sidecar sold) , July 2017 BOTM
'17 HD Road king and 08 HD Heritage softail (Beth's) (FOR SALE). I guess you can say we have MBS
all it takes for evil to prosper is the want of a few good men to do nothing-Edmund Burke
The question is not how much time do you have, it is what you do with the time that you have Gandalf
"One of the greatest dignities of humankind is that each successive generation is invested in the welfare of each new generation." Fred Rodgers
"it takes 10,000 hours to become an expert" ancient saying
78 constantly modified/customized since 1978, BOTM June 2015 de-evolving this very moment viewtopic.php?f=30&t=65511
76 Ltd "cookies bike" ALMOST DONE
79 project, finished, FOR SALE
'86 1200 (Beth's)(FOR SALE) with motorvation sidecar (sidecar sold) , July 2017 BOTM
'17 HD Road king and 08 HD Heritage softail (Beth's) (FOR SALE). I guess you can say we have MBS
- redwood
- Forum Greeter
- Posts: 2562
- Joined: Mon Sep 07, 2009 8:58 pm
- Location: Somewhere in Oklahoma, most of the time.
Re: New Project: no name (yet)
Welcome from Oklahoma!
Redwood
Three amazing Grandsons and a beautiful granddaughter, four great kids, two crazy cats, a husband who is fun to have around and two great motorcycles, one is an 1200 Interstate currently apart being painted and a Harley. (hey, I believe in riding, and everyone should ride what they love. And I happen to have MBS)
Three amazing Grandsons and a beautiful granddaughter, four great kids, two crazy cats, a husband who is fun to have around and two great motorcycles, one is an 1200 Interstate currently apart being painted and a Harley. (hey, I believe in riding, and everyone should ride what they love. And I happen to have MBS)
- Brant
- Board of Directors
- Posts: 10128
- Joined: Fri Mar 25, 2005 11:31 am
- My Album: http://www.ngwclub.com/gallery/v/wingmans/brant/
- Location: Hastings, Nebraska, USA
Re: New Project: no name (yet)
Welcome to the club.
83 GL 1100 bagger Ugly Betty
ALL WE WANT TO DO IS DRINK OUR ESPRESSO, RIDE OUR MACHINES, AND NOT BE HASSLED BY THE MAN
Owning a motorcycle is not a matter of life or death. It's much more important than that.
"Don't sweat the little things, guys, take care and appreciate all that you have around you!" - Fewman
NGWclub on Facebook
ALL WE WANT TO DO IS DRINK OUR ESPRESSO, RIDE OUR MACHINES, AND NOT BE HASSLED BY THE MAN
Owning a motorcycle is not a matter of life or death. It's much more important than that.
"Don't sweat the little things, guys, take care and appreciate all that you have around you!" - Fewman
NGWclub on Facebook
- duke182
- SUPER BIKER!!!!
- Posts: 3375
- Joined: Mon Jul 05, 2010 11:33 pm
- My Album: http://ngwclub.com/gallery/v/wingmans/duke182/
- Location: hope,ark
Re: New Project: no name (yet)
looks interesting
when you get started start another thread in the customizing forum
i for one would love to see your progress unfold
when you get started start another thread in the customizing forum
i for one would love to see your progress unfold
God bless those who protect our freedom, at every level
Knees in the breeze makes miles of smiles
"Strive for progress, not perfection"-a wise man
1984 1200 standard
click pic to see my gallery
vote in my poll
Knees in the breeze makes miles of smiles
"Strive for progress, not perfection"-a wise man
1984 1200 standard
click pic to see my gallery
vote in my poll
-
- Brass Member
- Posts: 27
- Joined: Sat Jan 14, 2012 10:37 pm
- Location: Deep South Louisiana
Re: New Project: no name (yet)
Going through my old posts, I did eventually do my long planned build! I ended up with a 77 GL1000 because I wanted the wire wheels. But a lot of my original vision did make it through to the end. I'm really pleased with what I ended up with. Build is in the customizing section "77 GL1000 Full Custom Build"
1977 GL1000
Full Custom!!!
Full Custom!!!
-
- Similar Topics
- Replies
- Views
- Last post
-
- 13 Replies
- 1118 Views
-
Last post by rcmatt007