New bike, new member
Moderators: Neil, redwood, rcmatt007, Forum Moderators
-
- Lead Member
- Posts: 7
- Joined: Sat Sep 09, 2017 9:04 pm
New bike, new member
Hello all,
So about a year ago I was offered a 1982 GW1100A for the low price of removal from my brother in law’s garage. He was given it some years back by a family member, and isn’t quite sure of it’s history. One thing he did know was that it needed a new starter. It was last inspected in 2007 and from what I can tell that was the last time it ran. I’m excited to cut this thing down but I’m looking to get it running first. I’ve been lurking for a couple weeks now soaking up information like crazy. So far I’ve gotten the starter replaced. Today I pulled the carbs. Is self rebuilding using Randakk’s kit the way to go or should I look for a carb shop? Any other tips /things to hit for a bike that hasn’t run in a while is much appreciated. Thanks!
So about a year ago I was offered a 1982 GW1100A for the low price of removal from my brother in law’s garage. He was given it some years back by a family member, and isn’t quite sure of it’s history. One thing he did know was that it needed a new starter. It was last inspected in 2007 and from what I can tell that was the last time it ran. I’m excited to cut this thing down but I’m looking to get it running first. I’ve been lurking for a couple weeks now soaking up information like crazy. So far I’ve gotten the starter replaced. Today I pulled the carbs. Is self rebuilding using Randakk’s kit the way to go or should I look for a carb shop? Any other tips /things to hit for a bike that hasn’t run in a while is much appreciated. Thanks!
MDFootballCoach
1982 GL1100A
1982 GL1100A
- robin1731
- Membership Admin
- Posts: 21729
- Joined: Mon May 29, 2006 8:31 am
- Location: Decatur, Indiana
Re: New bike, new member
Welcome aboard from Indiana.
On the carbs. Only you know if you could handle that. Randakks kit is the one to get. Along with the video if you go that route. GL carbs are probably the hardest I ever did the first time. 10 plus years ago. After doing lots of inline four carbs. Now I do them all the time. A "Randakk approved rebuilder". But like I said, only you know if you think you could do it.
.
On the carbs. Only you know if you could handle that. Randakks kit is the one to get. Along with the video if you go that route. GL carbs are probably the hardest I ever did the first time. 10 plus years ago. After doing lots of inline four carbs. Now I do them all the time. A "Randakk approved rebuilder". But like I said, only you know if you think you could do it.
.
1976 Goldwing Super Sport
1985 Honda Elite
1976 KZ900 Dragbike
1992 ZX7 Dragbike (KZ900 style motor w/NOS)
and a rotation of various purchases
Randakk approved Carb Rebuilder
1985 Honda Elite
1976 KZ900 Dragbike
1992 ZX7 Dragbike (KZ900 style motor w/NOS)
and a rotation of various purchases
Randakk approved Carb Rebuilder
- Track T 2411
- Honored Life Member
- Posts: 8511
- Joined: Thu May 29, 2008 9:37 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
- Location: Prairie du Sac Wisconsin
Re: New bike, new member
Welcome from Wisconsin! +1 on the Randakk kit. The video is for the 1000 carbs, though. They are a bit different. Randakk did offer a book to accompany his 1100 kit, which helped a lot with my first set. If you are persnickity, thorough, and patient, give the DIY thing a shot. If not, send them out to someone like Robin, above. I wouldn't take them to just any shop. Familiarity with the GoldWing carbs makes all the difference, IMhO...
"I have no special talent. I am only passionately curious." - Albert Einstein
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
- Sugs
- Gold Member
- Posts: 1069
- Joined: Sun Aug 09, 2015 6:12 pm
- Location: Springfield, MO
- 5speed
- Honored Life Member
- Posts: 5315
- Joined: Sat Jul 11, 2015 2:37 pm
- Location: Nova Scotia Canada
Re: New bike, new member
OMG.i get to say it first.
Change the timing belts and welcome to the site.
I would also change the thermostat,coolant,oil,gear oil in the final drive and the fork oil.
Change the timing belts and welcome to the site.
I would also change the thermostat,coolant,oil,gear oil in the final drive and the fork oil.
1982 1100 standard. (sold)
1986 Yamaha FJ1200
2000 Yamaha Roadstar
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
2019 Can-Am ryker (boss's new ride)
2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
1986 Yamaha FJ1200
2000 Yamaha Roadstar
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
2019 Can-Am ryker (boss's new ride)
2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
-
- Lead Member
- Posts: 7
- Joined: Sat Sep 09, 2017 9:04 pm
Re: New bike, new member
Thanks all for the welcome. I plan on doing the belts next. I figure I’ll diy the carbs as well.
MDFootballCoach
1982 GL1100A
1982 GL1100A
- robin1731
- Membership Admin
- Posts: 21729
- Joined: Mon May 29, 2006 8:31 am
- Location: Decatur, Indiana
Re: New bike, new member
While the video is for the 1000 carbs it does show some things that will help doing the 1100 carbs too. especially for the first timer.
.
.
1976 Goldwing Super Sport
1985 Honda Elite
1976 KZ900 Dragbike
1992 ZX7 Dragbike (KZ900 style motor w/NOS)
and a rotation of various purchases
Randakk approved Carb Rebuilder
1985 Honda Elite
1976 KZ900 Dragbike
1992 ZX7 Dragbike (KZ900 style motor w/NOS)
and a rotation of various purchases
Randakk approved Carb Rebuilder
- TNTbefree
- Silver Member
- Posts: 928
- Joined: Sun Mar 23, 2014 8:49 am
- Location: Jacksonville, FL
Re: New bike, new member
Welcome to the club. I also recommend you start a build thread. Take lots of pics, start to "finish" and post as much as you can as you go. We all love to follow, and help if we can, and when you get through it all, you will be glad to have a record of all that you did to get er done.
-
- Lead Member
- Posts: 7
- Joined: Sat Sep 09, 2017 9:04 pm
Re: New bike, new member
Yes, I am definitely going to start a project thread, bad things is I only thought of it yesterday after I had already pulled the faux tank and carbs, so I won’t have a real before pic but that’s okay.
MDFootballCoach
1982 GL1100A
1982 GL1100A
- chewy999
- SUPER BIKER!!!!
- Posts: 3214
- Joined: Tue Oct 16, 2012 11:21 am
- Location: Haddenham, Cambs, UK
Re: New bike, new member
Welcome to the club from the UK. When I got my bike I stripped the carbs down myself, first time I'd done that, and they weren't to bad so long as you followed the manual (Haynes). I did however end up sending them to Old Fogey in Scotland, just to make sure, but would be happy to do it myself again. Once you start on this site, you learn so much, about bikes and human kindness, and remember, there are no stupid questions, as I have asked loads over the time I've been here!
Last edited by chewy999 on Sun Sep 10, 2017 1:05 pm, edited 1 time in total.
Previous Rides,
1980 CB250N Good to learn on
1981 CX500 good mid range tourer, went to Austria on it!
1983 GL1100C Pride and joy, sold when I bought my 1st house, big mistake
1985 GL650 Silverwing another mistake, horrible bike
1986 CBX550 Good commuter
1989 Suzuki GS750 (1976) cheap and cheerful until a dog ran out in front of me on Xmas Eve, 1991
Current bikes
2010 CB1300 back on a bike after 19 years, two divorces, children grown up etc
1980 GL1100 NOW ON THE ROAD, still use CB1300.
1980 CB250N Good to learn on
1981 CX500 good mid range tourer, went to Austria on it!
1983 GL1100C Pride and joy, sold when I bought my 1st house, big mistake
1985 GL650 Silverwing another mistake, horrible bike
1986 CBX550 Good commuter
1989 Suzuki GS750 (1976) cheap and cheerful until a dog ran out in front of me on Xmas Eve, 1991
Current bikes
2010 CB1300 back on a bike after 19 years, two divorces, children grown up etc
1980 GL1100 NOW ON THE ROAD, still use CB1300.
- Rat
- Photo Gallery Admin
- Posts: 15480
- Joined: Fri Oct 21, 2005 9:59 pm
- My Album: https://www.ngwclub.com/gallery/v/wingmans/rat/
- RIP: cookie
- Location: Toronto .... Canada
Re: New bike, new member
Welcome to the 'Wingdom.
Time and patience will help with the carbs, if you are short of either send them out ....
Gord
Time and patience will help with the carbs, if you are short of either send them out ....
Gord
"I'd rather Ride than Shine"
‘14 KLR650 ... not a rat ... yet
‘84 GL1200i ‘R2B6' (Rat to Be 6, the last, adopted by twowings)
My Original 'RAT' was a hybrid '82 CB900/1100F
‘14 KLR650 ... not a rat ... yet
‘84 GL1200i ‘R2B6' (Rat to Be 6, the last, adopted by twowings)
My Original 'RAT' was a hybrid '82 CB900/1100F
- chewy999
- SUPER BIKER!!!!
- Posts: 3214
- Joined: Tue Oct 16, 2012 11:21 am
- Location: Haddenham, Cambs, UK
Re: New bike, new member
Sorry, wrong post!
Previous Rides,
1980 CB250N Good to learn on
1981 CX500 good mid range tourer, went to Austria on it!
1983 GL1100C Pride and joy, sold when I bought my 1st house, big mistake
1985 GL650 Silverwing another mistake, horrible bike
1986 CBX550 Good commuter
1989 Suzuki GS750 (1976) cheap and cheerful until a dog ran out in front of me on Xmas Eve, 1991
Current bikes
2010 CB1300 back on a bike after 19 years, two divorces, children grown up etc
1980 GL1100 NOW ON THE ROAD, still use CB1300.
1980 CB250N Good to learn on
1981 CX500 good mid range tourer, went to Austria on it!
1983 GL1100C Pride and joy, sold when I bought my 1st house, big mistake
1985 GL650 Silverwing another mistake, horrible bike
1986 CBX550 Good commuter
1989 Suzuki GS750 (1976) cheap and cheerful until a dog ran out in front of me on Xmas Eve, 1991
Current bikes
2010 CB1300 back on a bike after 19 years, two divorces, children grown up etc
1980 GL1100 NOW ON THE ROAD, still use CB1300.
- 5speed
- Honored Life Member
- Posts: 5315
- Joined: Sat Jul 11, 2015 2:37 pm
- Location: Nova Scotia Canada
Re: New bike, new member
put them back on and take pics.MDfootballcoach wrote:Yes, I am definitely going to start a project thread, bad things is I only thought of it yesterday after I had already pulled the faux tank and carbs, so I won’t have a real before pic but that’s okay.
1982 1100 standard. (sold)
1986 Yamaha FJ1200
2000 Yamaha Roadstar
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
2019 Can-Am ryker (boss's new ride)
2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
1986 Yamaha FJ1200
2000 Yamaha Roadstar
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
2019 Can-Am ryker (boss's new ride)
2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
-
- Similar Topics
- Replies
- Views
- Last post
-
- 16 Replies
- 1147 Views
-
Last post by 1984Redwing
-
- 5 Replies
- 492 Views
-
Last post by rcmatt007
-
- 2 Replies
- 397 Views
-
Last post by Track T 2411
-
- 125 Replies
- 16447 Views
-
Last post by robin1731
-
- 9 Replies
- 983 Views
-
Last post by Gowing