Oh, hey
Moderators: Neil, redwood, rcmatt007, Forum Moderators
-
- Tin Member
- Posts: 14
- Joined: Sat Jul 21, 2018 7:13 pm
- Location: Eastern US/Western NY
Oh, hey
So, I thought I had posted the into.
Anyway, picked up an 81 GL1100 not running and without a starter. Well, it has a starter, but it's scrap due to a previous repair attempt that broke the field windings.
My regular ride is an 86 Yama VMAX, hence the handle. I'm also on the GT Hawk forum under the same name.
Mostly here to learn about this older machinery from simpler times. (How cliche is that?)
Anyway, picked up an 81 GL1100 not running and without a starter. Well, it has a starter, but it's scrap due to a previous repair attempt that broke the field windings.
My regular ride is an 86 Yama VMAX, hence the handle. I'm also on the GT Hawk forum under the same name.
Mostly here to learn about this older machinery from simpler times. (How cliche is that?)
81 GL1100 - On the road!! March 2020
86 VMAX - Semi-Dailly commuter
- 5speed
- Honored Life Member
- Posts: 5311
- Joined: Sat Jul 11, 2015 2:37 pm
- Location: Nova Scotia Canada
Re: Oh, hey
welcome to the site. I have an 82 1100, love it. Huge fan of the first gen V-Max's too although I've never owned one. Watched a buddy race one in the 1/4 quite a few times though.
Make sure you change the timing belts during the restoration.
Make sure you change the timing belts during the restoration.
1982 1100 standard. (sold)
1986 Yamaha FJ1200
2000 Yamaha Roadstar
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
2019 Can-Am ryker (boss's new ride)
2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
1986 Yamaha FJ1200
2000 Yamaha Roadstar
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
2019 Can-Am ryker (boss's new ride)
2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
- chewy999
- SUPER BIKER!!!!
- Posts: 3214
- Joined: Tue Oct 16, 2012 11:21 am
- Location: Haddenham, Cambs, UK
Re: Oh, hey
Welcome to the club from the UK. I have a 1980 1100 which has (mostly) been fun to work on. Before you start her up, change the belts!
Previous Rides,
1980 CB250N Good to learn on
1981 CX500 good mid range tourer, went to Austria on it!
1983 GL1100C Pride and joy, sold when I bought my 1st house, big mistake
1985 GL650 Silverwing another mistake, horrible bike
1986 CBX550 Good commuter
1989 Suzuki GS750 (1976) cheap and cheerful until a dog ran out in front of me on Xmas Eve, 1991
Current bikes
2010 CB1300 back on a bike after 19 years, two divorces, children grown up etc
1980 GL1100 NOW ON THE ROAD, still use CB1300.
1980 CB250N Good to learn on
1981 CX500 good mid range tourer, went to Austria on it!
1983 GL1100C Pride and joy, sold when I bought my 1st house, big mistake
1985 GL650 Silverwing another mistake, horrible bike
1986 CBX550 Good commuter
1989 Suzuki GS750 (1976) cheap and cheerful until a dog ran out in front of me on Xmas Eve, 1991
Current bikes
2010 CB1300 back on a bike after 19 years, two divorces, children grown up etc
1980 GL1100 NOW ON THE ROAD, still use CB1300.
- Track T 2411
- Honored Life Member
- Posts: 8482
- Joined: Thu May 29, 2008 9:37 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
- Location: Prairie du Sac Wisconsin
Re: Oh, hey
Welcome from Wisconsin. I'm kind of partial to the 1100's, myself. I got a pretty good deal on my current ride because the p.o. twisted off the post trying to get the starter cable loose. He (fortunately for me) read in the Clymers manual that the engine had to be removed from the frame to replace the starter. I didn't want to take advantage of the guy, so I told him I would fix it for him, but he had already lost interest in keeping the bike...
Anyway, enjoy the ride!
Anyway, enjoy the ride!
"I have no special talent. I am only passionately curious." - Albert Einstein
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
- desertrefugee
- SUPER BIKER!!!!
- Posts: 3947
- Joined: Fri Nov 11, 2011 9:33 pm
- Location: Chandler, AZ, USA
Re: Oh, hey
Welcome from Arizona! Always happy to engage another VMaxer. Unfortunately, I sold my 3rd Max after the Valkyrie came home to roost three years ago. I'll probably have another before I exit stage left. Nothing like it. Nothing.
Here it was with my buddy's new "48". He was sure it would run with the VMax. Just another lesson to be taught. There were so many.
Here it was with my buddy's new "48". He was sure it would run with the VMax. Just another lesson to be taught. There were so many.
- Life is not about waiting for the storms to pass. It's about learning to ride in the rain.
- ritalz
- Honored Life Member
- Posts: 4090
- Joined: Sat Jun 25, 2005 10:22 am
- Location: St Louis, MO
Re: Oh, hey
Welcome from St Louis. Plenty to learn from this group.
Al
2003 Goldwing Daily Rider
1975 Goldwing 'Max'
1984 Goldwing New Bagger Project
1976 Goldwing 'Grocery Getter' Sold
1985 Goldwing Interstate 'NCC-1985' sold
1981 Silverwing Sold
1982 Goldeing Project Sold
1981 Goldwing Parted Out
1983 Goldwing Project Sold
1973 CB500F Long Gone
1966 CL77 First Street Bike
http://www.ngwclub.com/gallery3/index.p ... ans/ritalz
2003 Goldwing Daily Rider
1975 Goldwing 'Max'
1984 Goldwing New Bagger Project
1976 Goldwing 'Grocery Getter' Sold
1985 Goldwing Interstate 'NCC-1985' sold
1981 Silverwing Sold
1982 Goldeing Project Sold
1981 Goldwing Parted Out
1983 Goldwing Project Sold
1973 CB500F Long Gone
1966 CL77 First Street Bike
http://www.ngwclub.com/gallery3/index.p ... ans/ritalz
- Sugs
- Gold Member
- Posts: 1069
- Joined: Sun Aug 09, 2015 6:12 pm
- Location: Springfield, MO
- Rat
- Photo Gallery Admin
- Posts: 15457
- Joined: Fri Oct 21, 2005 9:59 pm
- My Album: https://www.ngwclub.com/gallery/v/wingmans/rat/
- RIP: cookie
- Location: Toronto .... Canada
Re: Oh, hey
Welcome to the 'Wingdom.
Lots of good info here
Gord
Lots of good info here
Gord
"I'd rather Ride than Shine"
‘14 KLR650 ... not a rat ... yet
‘84 GL1200i ‘R2B6' (Rat to Be 6, the last, adopted by twowings)
My Original 'RAT' was a hybrid '82 CB900/1100F
‘14 KLR650 ... not a rat ... yet
‘84 GL1200i ‘R2B6' (Rat to Be 6, the last, adopted by twowings)
My Original 'RAT' was a hybrid '82 CB900/1100F
- OCR
- Chrome Member
- Posts: 189
- Joined: Fri Jun 22, 2018 1:22 am
- Location: Finger Lakes of CNY
Re: Oh, hey
Good meeting you, we'll have to do that again whether it be on bikes or by cages.
Keep us all informed of your progress and enjoy the site.
Keep us all informed of your progress and enjoy the site.
79 CX500custom
76LTD
77Goldwing
2001 Polaris Scrambler 500 4X4
Secretary Caroline Lodge 681
76LTD
77Goldwing
2001 Polaris Scrambler 500 4X4
Secretary Caroline Lodge 681
- rcmatt007
- Treasurer
- Posts: 31305
- Joined: Fri Oct 21, 2005 12:48 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/rcmatt007/
- Location: New River Valley, Virginia
Re: Oh, hey
welcome to NGW
-Rodger-
all it takes for evil to prosper is the want of a few good men to do nothing-Edmund Burke
The question is not how much time do you have, it is what you do with the time that you have Gandalf
"One of the greatest dignities of humankind is that each successive generation is invested in the welfare of each new generation." Fred Rodgers
"it takes 10,000 hours to become an expert" ancient saying
78 constantly modified/customized since 1978, BOTM June 2015 de-evolving this very moment viewtopic.php?f=30&t=65511
76 Ltd "cookies bike" ALMOST DONE
79 project, finished, FOR SALE
'86 1200 (Beth's)(FOR SALE) with motorvation sidecar (sidecar sold) , July 2017 BOTM
'17 HD Road king and 08 HD Heritage softail (Beth's) (FOR SALE). I guess you can say we have MBS
all it takes for evil to prosper is the want of a few good men to do nothing-Edmund Burke
The question is not how much time do you have, it is what you do with the time that you have Gandalf
"One of the greatest dignities of humankind is that each successive generation is invested in the welfare of each new generation." Fred Rodgers
"it takes 10,000 hours to become an expert" ancient saying
78 constantly modified/customized since 1978, BOTM June 2015 de-evolving this very moment viewtopic.php?f=30&t=65511
76 Ltd "cookies bike" ALMOST DONE
79 project, finished, FOR SALE
'86 1200 (Beth's)(FOR SALE) with motorvation sidecar (sidecar sold) , July 2017 BOTM
'17 HD Road king and 08 HD Heritage softail (Beth's) (FOR SALE). I guess you can say we have MBS