Looking for alternative switch and instrument ideas

From basic novice to the hard core cutomizing. Sharing tips, tricks and knowledge. Feel
free to ask question or give us your "2 cents".

Moderators: sunnbobb, Neil, Forum Moderators

Post Reply
MikeNTexas
Titanium Member
Titanium Member
Posts: 327
Joined: Tue Dec 08, 2020 2:23 pm
Location: Slaton Tx (just o/s Lubbock)

Looking for alternative switch and instrument ideas

#1

Post by MikeNTexas »

I'm in the process of building a 1976 from a basket case. Not looking to keep it all original. Its just a project to keep me busy since I'm retired and don't like sitting around. I am down to wiring, installing handlebar switches and some kind of instrumentation. I am going to get rid of all of the diodes, resister, reserve lighting stuff and go with the basics. I''ve completely rewired several hotrods and classic cars over the years to that part doesn't scare me. I have also rebuilt 3 early wings and am familiar with the stock electrics. I'm just wanting to keep this simple and economical. I'll probably sell it after riding it a while to sort everything out so I don't want to get too upside down on it.

Are there any good aftermarket handlebar switches out there worth using? See lots of Chinese junk on ebay. Also have seen some digital instrument panels but not sure if they are programable to the GL1000 fuel and temp sending units or have sending units of their own.

I have a couple of extra shelters and am considering mounting switches and idiot lights in the center cover. I have one that is dented up some and wont mind drilling some holes in it. A Temp guage would be nice in the fuel guage hole since I dont have a working fuel guage and there is always the 'reserve will get me to a gas station' option.

I'd put stock parts on it If I could find good ones for a good price. All of the extra switches and instruments I have right now are not worth using. I do have two stock wiring harnesses both of which have some issues but I can use for terminals, plugs etc.

Here’s how it sits at the present.
692160CA-86C6-46DF-AAF0-5217E15F942F.jpeg
You do not have the required permissions to view the files attached to this post.
1975 GL1000 (it’s a keeper)
1983 GL1100 Custom (sold)
1976 GL1000 Project (finished and sold)
Another1976 GL1000 Project in the works
User avatar
pidjones
True Blue Steel Biker
True Blue Steel Biker
Posts: 2490
Joined: Wed May 22, 2013 4:06 pm
Location: East TN

Re: Looking for alternative switch and instrument ideas

#2

Post by pidjones »

I'm using a digital temp gauge (not very accurate, it seems) and volt meter (highly recommended with these old bikes!) From Chinabay sources. Just spun an adapter for the temp gauge sensor in the lathe.
"Love 'em all.... let God sort 'em out!"
Ex 2006 GL1800 - the Black Pearl SOLD! to make room for:
2021 Can-Am Spyder RT Limited Dark Chalk Metallic
1976 Yamaha RD400c
1978 GL1000 with '75 engine - the Hunley
Ex 1978 GL1000
Ex 1979 GL1000
Ex '79 CB750F rat bike
Ex '86 SEi
Ex '77 GL1000
Ex '76 RD400
Ex '72 Penton 125 set up for flat track
Ex '73 RD250
Ex '68 TR6C - chopped
Figor
Cast Iron Member
Cast Iron Member
Posts: 69
Joined: Fri Jun 18, 2021 7:11 pm
Location: Central Illinois

Re: Looking for alternative switch and instrument ideas

#3

Post by Figor »

I’ve been eyeballing those Chinese ones on Amazon. Cheap enough. Just don’t know if I feel like the headache yet. My Speedo finally grenaded and I’m just riding by rpms at the moment. Would be nice to have some modern instruments. I don’t know if the quality is there though. A lot of mixed reviews. I’m not sure I believe half of those reviews anyway. Probably just some sales promoting.
1981 Goldwing GL1100
Microsquirt efi
Post Reply

Return to “GoldWing UnderGround CustomiZing”