duke182's -"worlds slowest build thread"
Moderators: sunnbobb, Neil, Forum Moderators
- duke182
- SUPER BIKER!!!!
- Posts: 3375
- Joined: Mon Jul 05, 2010 11:33 pm
- My Album: http://ngwclub.com/gallery/v/wingmans/duke182/
- Location: hope,ark
duke182's -"worlds slowest build thread"
i have been on this site for a little while now and have been really enjoying the place.
there is so much to view and learn that it is hard not to.I
when i joined i figured to glean a few ideas and apply them to my bike, in addition to what i had already done.
well since then i have just about driven myself nuts deciding wether or not to continue on the already choosen path or to take the bike in an entirely new direction.
it would have been easy to alter my view entirely because there are so many great ideas on this site.
what i decided was to follow my original plan and finish the bike according to my first vision of it while incorporating those ideas found here that fit the style i wanted.
so i guess its time to twist the throttle, so to speak, and get this project back underway.
my intention is to chronicle the effort up to and past the first ride as a completed project.
there have been so many great builds here that i dont expect to make an impact, i just want to do it and see what you guys think as it happens.
i expect this to be the slowest build thread on here so i hope ya'll will be patient.
what i hope to get from you is feedback. good or bad. im sure i wont like all your comments or use all your ideas but i am looking forward to them.
i will list and revise my basic list of ideas in this first post and will try to provide plenty of pics along the way.
THE LIST:
-completely dissassemble the bike--------------------in progress
-front fender removed-------------------------------------------------------------------------------------------------------------------------done
-www tire-----------------------------------------------
-forks extended----------------------------------------extended fork tubes-------------------
-raked trees?--------------------------------------------
-stock headlight and bracket with custom grill ------------------------
-stock bars with custom risers--------------------------------------------done
-frame modified at the neck for rake and/or stretch
-customized shelter------------------------in progress
-custom seating-----------------------------------------in progress
-rear of frame modified accordingly--------------------still undecided about rear frame treatment
-custom sissy bar---------------------------------------have one, need to make it fit
-side covers customized---------------------------------------------------------------------------------------------------------------------------done
-shorter shocks-----------------------------------------maybe solid struts
-rear fender bobbed----------------------------------------------------------------------------------------------------------------------------done
- stock rear wheel with solid discs added-------------have discs, need to modify
-www rear tire---have tire needs to be mounted
-custom taillight----------------------------------------in progress
-custom radiator grill----------------------------------in progress
-radiator and fan detailed-----------------------------in progress
-belt covers removed???------------------------------thinking about custom made covers
-alternator conversion---------------------------------contemplating a poorboy conversion---leaning more towards jake2012's example
-custom wiring harness--------------------------------skematic is done, now the fun part
-gel battery---------------------------------------------have one located, just have to get it bought
-k&n air filter-------------------------------------------have one located, just have to get it bought
-new belts----------------------------------------------have one located, just have to get it bought
-carbs rebuilt(possible single carb conversion)
---refinished
---stainless hardware
---tuned
-engine cleaned and detailed
---new belts
---new gaskets
---water pump inspected
---head work as necessary
---valves adjusted
---stator removed/replaced???-----------------------------must study this some more
---custom cover if stator removed???-----------this too
---stainless hardware kit
---paint and polish as necessary
-custom pegs including passenger and highway
-custom jiffy stand--------------------in progress
-center stand removed-------------------------------------------------------------------------------------------------------------------------done
stock exhaust removed------------------------------------------------------------------------------------------------------------------------done
- custom exhaust installed-----------------------------some pieces on hand, some parts located
-gas tank removed-------------------------------------going to modify the stock tank to allow a seat to set lower
-custom gas tank?--------------------------------------
-color????-----------------------------------------------to be decided by poll------------------------very close voting so far
-maintainance and performance mods as needed or desired
-hopefully a lot of detail work that will make the project fun and draw a little attention from those in the know when its finished.
-present finished bike
any way that pretty much sums up the wish list.
you dont have to wish me luck but i would like to know what you think about it.
i have also included a poll about the color. please tell me what you think would be a good choice of color(s)
there is so much to view and learn that it is hard not to.I
when i joined i figured to glean a few ideas and apply them to my bike, in addition to what i had already done.
well since then i have just about driven myself nuts deciding wether or not to continue on the already choosen path or to take the bike in an entirely new direction.
it would have been easy to alter my view entirely because there are so many great ideas on this site.
what i decided was to follow my original plan and finish the bike according to my first vision of it while incorporating those ideas found here that fit the style i wanted.
so i guess its time to twist the throttle, so to speak, and get this project back underway.
my intention is to chronicle the effort up to and past the first ride as a completed project.
there have been so many great builds here that i dont expect to make an impact, i just want to do it and see what you guys think as it happens.
i expect this to be the slowest build thread on here so i hope ya'll will be patient.
what i hope to get from you is feedback. good or bad. im sure i wont like all your comments or use all your ideas but i am looking forward to them.
i will list and revise my basic list of ideas in this first post and will try to provide plenty of pics along the way.
THE LIST:
-completely dissassemble the bike--------------------in progress
-front fender removed-------------------------------------------------------------------------------------------------------------------------done
-www tire-----------------------------------------------
-forks extended----------------------------------------extended fork tubes-------------------
-raked trees?--------------------------------------------
-stock headlight and bracket with custom grill ------------------------
-stock bars with custom risers--------------------------------------------done
-frame modified at the neck for rake and/or stretch
-customized shelter------------------------in progress
-custom seating-----------------------------------------in progress
-rear of frame modified accordingly--------------------still undecided about rear frame treatment
-custom sissy bar---------------------------------------have one, need to make it fit
-side covers customized---------------------------------------------------------------------------------------------------------------------------done
-shorter shocks-----------------------------------------maybe solid struts
-rear fender bobbed----------------------------------------------------------------------------------------------------------------------------done
- stock rear wheel with solid discs added-------------have discs, need to modify
-www rear tire---have tire needs to be mounted
-custom taillight----------------------------------------in progress
-custom radiator grill----------------------------------in progress
-radiator and fan detailed-----------------------------in progress
-belt covers removed???------------------------------thinking about custom made covers
-alternator conversion---------------------------------contemplating a poorboy conversion---leaning more towards jake2012's example
-custom wiring harness--------------------------------skematic is done, now the fun part
-gel battery---------------------------------------------have one located, just have to get it bought
-k&n air filter-------------------------------------------have one located, just have to get it bought
-new belts----------------------------------------------have one located, just have to get it bought
-carbs rebuilt(possible single carb conversion)
---refinished
---stainless hardware
---tuned
-engine cleaned and detailed
---new belts
---new gaskets
---water pump inspected
---head work as necessary
---valves adjusted
---stator removed/replaced???-----------------------------must study this some more
---custom cover if stator removed???-----------this too
---stainless hardware kit
---paint and polish as necessary
-custom pegs including passenger and highway
-custom jiffy stand--------------------in progress
-center stand removed-------------------------------------------------------------------------------------------------------------------------done
stock exhaust removed------------------------------------------------------------------------------------------------------------------------done
- custom exhaust installed-----------------------------some pieces on hand, some parts located
-gas tank removed-------------------------------------going to modify the stock tank to allow a seat to set lower
-custom gas tank?--------------------------------------
-color????-----------------------------------------------to be decided by poll------------------------very close voting so far
-maintainance and performance mods as needed or desired
-hopefully a lot of detail work that will make the project fun and draw a little attention from those in the know when its finished.
-present finished bike
any way that pretty much sums up the wish list.
you dont have to wish me luck but i would like to know what you think about it.
i have also included a poll about the color. please tell me what you think would be a good choice of color(s)
Last edited by duke182 on Tue Jun 09, 2015 11:04 pm, edited 21 times in total.
God bless those who protect our freedom, at every level
Knees in the breeze makes miles of smiles
"Strive for progress, not perfection"-a wise man
1984 1200 standard
click pic to see my gallery
vote in my poll
Knees in the breeze makes miles of smiles
"Strive for progress, not perfection"-a wise man
1984 1200 standard
click pic to see my gallery
vote in my poll
- duke182
- SUPER BIKER!!!!
- Posts: 3375
- Joined: Mon Jul 05, 2010 11:33 pm
- My Album: http://ngwclub.com/gallery/v/wingmans/duke182/
- Location: hope,ark
Re: duke182's project oldwing gets back under way
just thought i would show you who to blame for hacking up an 84 standard model
- Attachments
-
- duke182
- Photo0253.jpg (166.12 KiB) Viewed 3728 times
God bless those who protect our freedom, at every level
Knees in the breeze makes miles of smiles
"Strive for progress, not perfection"-a wise man
1984 1200 standard
click pic to see my gallery
vote in my poll
Knees in the breeze makes miles of smiles
"Strive for progress, not perfection"-a wise man
1984 1200 standard
click pic to see my gallery
vote in my poll
- duke182
- SUPER BIKER!!!!
- Posts: 3375
- Joined: Mon Jul 05, 2010 11:33 pm
- My Album: http://ngwclub.com/gallery/v/wingmans/duke182/
- Location: hope,ark
Re: duke182's project oldwing gets back under way
this is what i have after stripping off lots of stock and broken parts. i didnt have the forthought to take a picture right after i brought it home. i guess i was having to much fun riding the ugly beast.
at this point i have removed the front fender, broken wind shield, crash bars, busted fog lights, blinkers, tail lights, mufflers, center stand, shelter lock and broken ignition switch as well as the shelter , seat, side covers and saddle bags which included extra lights and crash bars for the rear.
at this point i have removed the front fender, broken wind shield, crash bars, busted fog lights, blinkers, tail lights, mufflers, center stand, shelter lock and broken ignition switch as well as the shelter , seat, side covers and saddle bags which included extra lights and crash bars for the rear.
- Attachments
-
- oldwing.jpg (10.99 KiB) Viewed 3740 times
God bless those who protect our freedom, at every level
Knees in the breeze makes miles of smiles
"Strive for progress, not perfection"-a wise man
1984 1200 standard
click pic to see my gallery
vote in my poll
Knees in the breeze makes miles of smiles
"Strive for progress, not perfection"-a wise man
1984 1200 standard
click pic to see my gallery
vote in my poll
- Roady
- Member Relations &_Graphics
- Posts: 11957
- Joined: Wed Jun 20, 2007 2:35 pm
- Location: Port St. John, FL
Re: duke182's project oldwing gets back under way
I vote that you should paint it your favorite color or match the original color.
And, of course, we will need lots of pics of the bike and the progress.
And, of course, we will need lots of pics of the bike and the progress.
- duke182
- SUPER BIKER!!!!
- Posts: 3375
- Joined: Mon Jul 05, 2010 11:33 pm
- My Album: http://ngwclub.com/gallery/v/wingmans/duke182/
- Location: hope,ark
Re: duke182's project oldwing gets back under way
some of the parts on their way to the great scrap heap out back.
more pics later!
more pics later!
- Attachments
-
- the stock seat is out of the running
- Photo0164.jpg (50.01 KiB) Viewed 3735 times
-
- the old bags gotta go
- Photo0176.jpg (149.49 KiB) Viewed 3717 times
-
- bad lock and switch
- lock.jpg (82.65 KiB) Viewed 3735 times
God bless those who protect our freedom, at every level
Knees in the breeze makes miles of smiles
"Strive for progress, not perfection"-a wise man
1984 1200 standard
click pic to see my gallery
vote in my poll
Knees in the breeze makes miles of smiles
"Strive for progress, not perfection"-a wise man
1984 1200 standard
click pic to see my gallery
vote in my poll
- duke182
- SUPER BIKER!!!!
- Posts: 3375
- Joined: Mon Jul 05, 2010 11:33 pm
- My Album: http://ngwclub.com/gallery/v/wingmans/duke182/
- Location: hope,ark
Re: duke182's project oldwing gets back under way
well roady,
those listed in the poll are some of my favorite colors and combinations of colors.
so what i figure is this: since paint will be some time in the future, i would let the poll run, and when it is time for paint i would take the number one vote getter or my favorite 'other' opinion and use the opinion of the board to help me make the final decession for this project.
and i hope to meet your expectations of pics and info.
i just hope i dont lose your interest when things get slo. my budget is never constant so progress will most likely come in bursts when time and money is available.
right now im excited as possible about this build. sure hope i can keep it high until completion.
duke182
those listed in the poll are some of my favorite colors and combinations of colors.
so what i figure is this: since paint will be some time in the future, i would let the poll run, and when it is time for paint i would take the number one vote getter or my favorite 'other' opinion and use the opinion of the board to help me make the final decession for this project.
and i hope to meet your expectations of pics and info.
i just hope i dont lose your interest when things get slo. my budget is never constant so progress will most likely come in bursts when time and money is available.
right now im excited as possible about this build. sure hope i can keep it high until completion.
duke182
God bless those who protect our freedom, at every level
Knees in the breeze makes miles of smiles
"Strive for progress, not perfection"-a wise man
1984 1200 standard
click pic to see my gallery
vote in my poll
Knees in the breeze makes miles of smiles
"Strive for progress, not perfection"-a wise man
1984 1200 standard
click pic to see my gallery
vote in my poll
- duke182
- SUPER BIKER!!!!
- Posts: 3375
- Joined: Mon Jul 05, 2010 11:33 pm
- My Album: http://ngwclub.com/gallery/v/wingmans/duke182/
- Location: hope,ark
Re: duke182's project oldwing gets back under way
in this picture the shelter has been primed and the lock hole filled. the rear fender has also been bobbed filled and primed.
the rear schock has also bee laid at a different angle to see how it would affect ride height.
the bars are also taller than stock due to 6" dogbone style risers.
the rear schock has also bee laid at a different angle to see how it would affect ride height.
the bars are also taller than stock due to 6" dogbone style risers.
- Attachments
-
- a little mock up work
- old2.jpg (15.07 KiB) Viewed 3731 times
God bless those who protect our freedom, at every level
Knees in the breeze makes miles of smiles
"Strive for progress, not perfection"-a wise man
1984 1200 standard
click pic to see my gallery
vote in my poll
Knees in the breeze makes miles of smiles
"Strive for progress, not perfection"-a wise man
1984 1200 standard
click pic to see my gallery
vote in my poll
- duke182
- SUPER BIKER!!!!
- Posts: 3375
- Joined: Mon Jul 05, 2010 11:33 pm
- My Album: http://ngwclub.com/gallery/v/wingmans/duke182/
- Location: hope,ark
Re: duke182's project oldwing gets back under way
here is the switch i intend to use. it has a start feature built in so i will be able to eliminate the start button from the bars.
also are a few supplies i purchased for use on the project.
also are a few supplies i purchased for use on the project.
- Attachments
-
- tractor switch
- switch.jpg (141.57 KiB) Viewed 3708 times
-
- supplies
- supplies.jpg (127.79 KiB) Viewed 3726 times
God bless those who protect our freedom, at every level
Knees in the breeze makes miles of smiles
"Strive for progress, not perfection"-a wise man
1984 1200 standard
click pic to see my gallery
vote in my poll
Knees in the breeze makes miles of smiles
"Strive for progress, not perfection"-a wise man
1984 1200 standard
click pic to see my gallery
vote in my poll
- Hoosier Daddy
- True Blue Steel Biker
- Posts: 2910
- Joined: Thu May 21, 2009 9:12 pm
- Location: N.E. Indiana (Kendallville)
Re: duke182's project oldwing gets back under way
Peaked my interest! those are some awesome plans, I think with a list of modifications like that the wilder the paint scheme the better, bright color with bass boat sized flake. But lets see how she pans out before I click a button. Sometimes the build itself decides the color. Regaurdless of how long it takes I will now get notified of updates, so keep em comin.
Bulldoged '81 GL1100 "BOMBER!" BUILD THREAD
Bratstyle '80 GS750L "OVERKILL"
Cafe'd '81 CB750C "ROCK-IT"
Basket Case '72 CB450 K5 "NO CLASS"
Resto-Mod '67 BSA Spitfire "STAY CLEAN"
rainstromrider say's I'm "addicted to the build"... I think he might onto something
Bratstyle '80 GS750L "OVERKILL"
Cafe'd '81 CB750C "ROCK-IT"
Basket Case '72 CB450 K5 "NO CLASS"
Resto-Mod '67 BSA Spitfire "STAY CLEAN"
rainstromrider say's I'm "addicted to the build"... I think he might onto something
- Neil
- Moderator
- Posts: 5667
- Joined: Tue Sep 09, 2008 3:34 pm
- Location: Davenport, Florida
Re: duke182's project oldwing gets back under way
Nice project ... will be watching this one
- FirstYearDeek
- True Blue Steel Biker
- Posts: 2543
- Joined: Sun Aug 10, 2008 4:41 pm
- Location: Terre Haute, Indiana
Re: duke182's project oldwing gets back under way
I love the idea of a red/silver bike (I just remembered Doug's Cyborg!) but that fits a more sport bike feel... ditch the red, keep the silver frame and the sky blue would look sick!
-Deek
-Deek
"Eat, drink and be merry. For tomorrow we die."
1975 GL 1000 (First Year) under the knife; soon to be a cafe' inspired "Boss" of a freedom machine.
1975 GL 1000 (First Year) under the knife; soon to be a cafe' inspired "Boss" of a freedom machine.
- duke182
- SUPER BIKER!!!!
- Posts: 3375
- Joined: Mon Jul 05, 2010 11:33 pm
- My Album: http://ngwclub.com/gallery/v/wingmans/duke182/
- Location: hope,ark
Re: duke182's project oldwing gets back under way
some more parts and pieces that most likely wont be used
- Attachments
-
- unnecessary weight
- unnecessary.jpg (229.88 KiB) Viewed 3685 times
-
- stock light and bracket
- light.jpg (132.04 KiB) Viewed 3685 times
-
- emblem
- emblem.jpg (74.89 KiB) Viewed 3703 times
God bless those who protect our freedom, at every level
Knees in the breeze makes miles of smiles
"Strive for progress, not perfection"-a wise man
1984 1200 standard
click pic to see my gallery
vote in my poll
Knees in the breeze makes miles of smiles
"Strive for progress, not perfection"-a wise man
1984 1200 standard
click pic to see my gallery
vote in my poll
- duke182
- SUPER BIKER!!!!
- Posts: 3375
- Joined: Mon Jul 05, 2010 11:33 pm
- My Album: http://ngwclub.com/gallery/v/wingmans/duke182/
- Location: hope,ark
Re: duke182's project oldwing gets back under way
and some more
- Attachments
-
- the oldwing emblem might get used somewhere
- emblems.jpg (151.4 KiB) Viewed 3684 times
-
- front fender scraps. i bobbed it but probably wont use it.
- fender scraps.jpg (146.02 KiB) Viewed 3684 times
-
- these had to go. way to quite
- stockpipes2.jpg (183.91 KiB) Viewed 3430 times
Last edited by duke182 on Wed Apr 20, 2011 9:30 pm, edited 1 time in total.
God bless those who protect our freedom, at every level
Knees in the breeze makes miles of smiles
"Strive for progress, not perfection"-a wise man
1984 1200 standard
click pic to see my gallery
vote in my poll
Knees in the breeze makes miles of smiles
"Strive for progress, not perfection"-a wise man
1984 1200 standard
click pic to see my gallery
vote in my poll
- duke182
- SUPER BIKER!!!!
- Posts: 3375
- Joined: Mon Jul 05, 2010 11:33 pm
- My Album: http://ngwclub.com/gallery/v/wingmans/duke182/
- Location: hope,ark
Re: duke182's project oldwing gets back under way
a few parts with uncertain futures.
-the side covers look good but im not sure they will fit the look im going for
-the exhaust tip worked and sounded great but i think i want a longer pipe for the next incarnation
-not sure the glove box will fit after other mods i want to do
-the side covers look good but im not sure they will fit the look im going for
-the exhaust tip worked and sounded great but i think i want a longer pipe for the next incarnation
-not sure the glove box will fit after other mods i want to do
- Attachments
-
- smoothed and primed
- covers.jpg (126.37 KiB) Viewed 3681 times
-
- simple tip and adaptor
- ex tip.jpg (80.18 KiB) Viewed 3681 times
-
- glovebox
- glovebox.jpg (110.87 KiB) Viewed 3699 times
God bless those who protect our freedom, at every level
Knees in the breeze makes miles of smiles
"Strive for progress, not perfection"-a wise man
1984 1200 standard
click pic to see my gallery
vote in my poll
Knees in the breeze makes miles of smiles
"Strive for progress, not perfection"-a wise man
1984 1200 standard
click pic to see my gallery
vote in my poll
- duke182
- SUPER BIKER!!!!
- Posts: 3375
- Joined: Mon Jul 05, 2010 11:33 pm
- My Album: http://ngwclub.com/gallery/v/wingmans/duke182/
- Location: hope,ark
Re: duke182's project oldwing gets back under way
more parts with uncertainty.
- i want to put the speedo in a custom dash but im not sure the tach will be incorporated
-the trailer fender was considered to build a street sweeper style fender. dont think its gonna happen on this bike
- i want to put the speedo in a custom dash but im not sure the tach will be incorporated
-the trailer fender was considered to build a street sweeper style fender. dont think its gonna happen on this bike
- Attachments
-
- tach n speedo
- tach n speedo.jpg (159.66 KiB) Viewed 3679 times
-
- early thought on rear fender
- r fender.jpg (142.03 KiB) Viewed 3697 times
God bless those who protect our freedom, at every level
Knees in the breeze makes miles of smiles
"Strive for progress, not perfection"-a wise man
1984 1200 standard
click pic to see my gallery
vote in my poll
Knees in the breeze makes miles of smiles
"Strive for progress, not perfection"-a wise man
1984 1200 standard
click pic to see my gallery
vote in my poll
-
- Similar Topics
- Replies
- Views
- Last post
-
- 28 Replies
- 3319 Views
-
Last post by Jwise76
-
- 24 Replies
- 2731 Views
-
Last post by 84aspybobber
-
- 30 Replies
- 1172 Views
-
Last post by datsunfreak