GL 1100 Cut, weld, wrench then ride
Moderators: sunnbobb, Neil, Forum Moderators
- Easter
- SUPER BIKER!!!!
- Posts: 3000
- Joined: Thu Sep 13, 2012 11:33 am
- Location: South of Houston 100 miles
Re: GL 1100 Cut, weld, wrench then ride
Looking great.
Bikes at present:
83 XL 600r with a 2004 XR650L engine
And a slightly worse for the wear BMW GS adventure bike awaiting repair
83 GL in process
83 XL 600r with a 2004 XR650L engine
And a slightly worse for the wear BMW GS adventure bike awaiting repair
83 GL in process
- AstroWing
- Billet Alum. Member
- Posts: 203
- Joined: Sun Dec 09, 2012 8:02 am
- Location: Concord N Carolina
Re: GL 1100 Cut, weld, wrench then ride
Well, the last few months have come and gone without me making much progress on the AstroWing project. I expected to have some free time Oct - Jan. That didn't happen.
My team Manger position with the IMSA Action Express Prototype race team is going well. We decided to also take on a AMA Flat track team. We have been busy building 2 Honda 450's for the Daytona races in March and 2 Kawasaki twin 650's bored and stroked to 750 for the bigger tracks. For the 750's we are building the bike frames in our shop. Our rider is Shayna Texter and the team name is Richie Morris Racing.
Please follow our progress in 2016.
I think about this Gold Wing project all the time, but it may be awhile before I get more done.
Please stand by.
Thank you for your continued patience.
Gary Nelson
My team Manger position with the IMSA Action Express Prototype race team is going well. We decided to also take on a AMA Flat track team. We have been busy building 2 Honda 450's for the Daytona races in March and 2 Kawasaki twin 650's bored and stroked to 750 for the bigger tracks. For the 750's we are building the bike frames in our shop. Our rider is Shayna Texter and the team name is Richie Morris Racing.
Please follow our progress in 2016.
I think about this Gold Wing project all the time, but it may be awhile before I get more done.
Please stand by.
Thank you for your continued patience.
Gary Nelson
Have lots of bikes... need one more.
- HOTT
- Run Executive
- Posts: 3252
- Joined: Sun Aug 02, 2009 6:48 pm
- My Album: http://www.ngwclub.com/gallery3/index.php/wingmans/HOTT
- Location: Spring,TX
- Contact:
Re: GL 1100 Cut, weld, wrench then ride
Dang! That sure beats the lame excuses the rest of us give.
Thanks for the update. Keep on keepin' on.
HOTT
Thanks for the update. Keep on keepin' on.
HOTT
If we can't fix it, we can fix it so no one else can.
the Condor BOTY 2011
Ol' Sparky BOTM Dec. 2011
Lucky #13 BOTY 2018
the Condor BOTY 2011
Ol' Sparky BOTM Dec. 2011
Lucky #13 BOTY 2018
-
- Billet Alum. Member
- Posts: 240
- Joined: Tue Jun 30, 2015 12:48 pm
- Location: Ontario
Re: GL 1100 Cut, weld, wrench then ride
and here i was expecting an astro van and wing somehow combined...
1977 GL1000, with GL1100 engine and carbs....in progress
1984 GL1200 Ascenpade gone naked...............in progress
1976 GL1000 1200 Engine, 1200 wheels...........in progress
1983 GL1100 Stock, fully functional!
1982 GL1100 ..................................................in progress
1976 GL1000 Stock resto....................... .........in progress
1978 GL1000....Upgraded...Bad cylinder............in progress
1982 CB900, 83 GL1100 rear end, 2006 gsxr1000 front end, 1200 front wheel..... in progress
1981 CB750k Needs attention.... in progress
The more time I spend on here the farther behind I get
1984 GL1200 Ascenpade gone naked...............in progress
1976 GL1000 1200 Engine, 1200 wheels...........in progress
1983 GL1100 Stock, fully functional!
1982 GL1100 ..................................................in progress
1976 GL1000 Stock resto....................... .........in progress
1978 GL1000....Upgraded...Bad cylinder............in progress
1982 CB900, 83 GL1100 rear end, 2006 gsxr1000 front end, 1200 front wheel..... in progress
1981 CB750k Needs attention.... in progress
The more time I spend on here the farther behind I get
- Norbert R
- Gold Member
- Posts: 1373
- Joined: Wed Apr 03, 2013 3:13 pm
- Location: Johannesburg South Africa
Re: GL 1100 Cut, weld, wrench then ride
Take the Wing to work with you, and slide it in between the flat trackers
-
- Titanium Member
- Posts: 304
- Joined: Tue Jan 04, 2011 12:33 pm
- Location: Goatpoop ,florida
Re: GL 1100 Cut, weld, wrench then ride
I see a lot of that lately,like BMW " scramblers" with clip-ons. I have a 73 sohc that needs a motor,its probably going the scrambler or street tracker route. Keep up the good work,I'm paying close attention!
-
- True Blue Steel Biker
- Posts: 2314
- Joined: Wed Apr 11, 2012 10:50 am
Re: GL 1100 Cut, weld, wrench then ride
Gary, I hope you don't mind me posting your bio. I was reading your astrowing project
last night and took your advice to start following your switch from cars to dirt sliding bikes.
Glad you chose an old wing for your project.
http://axracing.com/gary-nelson/
last night and took your advice to start following your switch from cars to dirt sliding bikes.
Glad you chose an old wing for your project.
http://axracing.com/gary-nelson/
Dave
1975 GL 1000
1980 XS650
1981 ct110
1972 F7 KAW 175
2000 moby blaze 40cc
Chihuahua (Ellie)
Chihuahua #2(Blaze)
1975 GL 1000
1980 XS650
1981 ct110
1972 F7 KAW 175
2000 moby blaze 40cc
Chihuahua (Ellie)
Chihuahua #2(Blaze)
- AstroWing
- Billet Alum. Member
- Posts: 203
- Joined: Sun Dec 09, 2012 8:02 am
- Location: Concord N Carolina
Re: GL 1100 Cut, weld, wrench then ride
Hello GoWing,
No problem, thank you.
We have made great progress on the IMSA Corvettes (Daytona 24 hours next weekend) and the AMA Honda 450's. (Daytona flat track in early March) The first big bike is still in the frame jig, we hope to be testing it late in Feb.
No problem, thank you.
We have made great progress on the IMSA Corvettes (Daytona 24 hours next weekend) and the AMA Honda 450's. (Daytona flat track in early March) The first big bike is still in the frame jig, we hope to be testing it late in Feb.
Have lots of bikes... need one more.
- Rat
- Photo Gallery Admin
- Posts: 15482
- Joined: Fri Oct 21, 2005 9:59 pm
- My Album: https://www.ngwclub.com/gallery/v/wingmans/rat/
- RIP: cookie
- Location: Toronto .... Canada
Re: GL 1100 Cut, weld, wrench then ride
Hope the storm is not too bad there .....
Gord
Gord
"I'd rather Ride than Shine"
‘14 KLR650 ... not a rat ... yet
‘84 GL1200i ‘R2B6' (Rat to Be 6, the last, adopted by twowings)
My Original 'RAT' was a hybrid '82 CB900/1100F
‘14 KLR650 ... not a rat ... yet
‘84 GL1200i ‘R2B6' (Rat to Be 6, the last, adopted by twowings)
My Original 'RAT' was a hybrid '82 CB900/1100F
- AstroWing
- Billet Alum. Member
- Posts: 203
- Joined: Sun Dec 09, 2012 8:02 am
- Location: Concord N Carolina
Re: GL 1100 Cut, weld, wrench then ride
Hello Gord,
Thanks for asking. Storm was about normal, prediction was 12 inches of snow, we got about 2-3. I stayed inside except, I needed some handles for a cabinet. I had some leftover 1941 Ford door handles. A little cutting and welding, then back inside.
Thanks for asking. Storm was about normal, prediction was 12 inches of snow, we got about 2-3. I stayed inside except, I needed some handles for a cabinet. I had some leftover 1941 Ford door handles. A little cutting and welding, then back inside.
- Attachments
-
- image.jpeg (50.77 KiB) Viewed 374 times
-
- image.jpeg (21.43 KiB) Viewed 374 times
Have lots of bikes... need one more.
- HOTT
- Run Executive
- Posts: 3252
- Joined: Sun Aug 02, 2009 6:48 pm
- My Album: http://www.ngwclub.com/gallery3/index.php/wingmans/HOTT
- Location: Spring,TX
- Contact:
Re: GL 1100 Cut, weld, wrench then ride
Ha! that's cool.
HOTT
HOTT
If we can't fix it, we can fix it so no one else can.
the Condor BOTY 2011
Ol' Sparky BOTM Dec. 2011
Lucky #13 BOTY 2018
the Condor BOTY 2011
Ol' Sparky BOTM Dec. 2011
Lucky #13 BOTY 2018
- 82aspy
- True Blue Steel Biker
- Posts: 2279
- Joined: Sun Jul 01, 2012 8:12 pm
- Location: canuck
Re: GL 1100 Cut, weld, wrench then ride
Gowing wrote:Gary, I hope you don't mind me posting your bio. I was reading your astrowing project
last night and took your advice to start following your switch from cars to dirt sliding bikes.
Glad you chose an old wing for your project.
http://axracing.com/gary-nelson/
"there is a Darwinian element"
Yoda said, "There is no try or not try; there is only do or don't do."
=====================
ngw quotes - \ "I will strip the beast" \ "the swingarm is just a hunk of metal" \ "gonna maybe ...dunno yet" \ "It's never done, thats the fun." \ "something about this site brings me back"
Yoda said, "There is no try or not try; there is only do or don't do."
=====================
ngw quotes - \ "I will strip the beast" \ "the swingarm is just a hunk of metal" \ "gonna maybe ...dunno yet" \ "It's never done, thats the fun." \ "something about this site brings me back"
- BikeMaine
- Gold Member
- Posts: 1105
- Joined: Sun Feb 07, 2016 7:57 pm
- Location: Maine, U.S.A.
Re: GL 1100 Cut, weld, wrench then ride
This is my first post, Excellent build so far, I really enjoyed reading every post since the beginning.
I just started a build myself, an '82 GL1100A
Kev in Maine
I just started a build myself, an '82 GL1100A
Kev in Maine
Kevin
1982 GL1100A
1982 GL1100A
- AstroWing
- Billet Alum. Member
- Posts: 203
- Joined: Sun Dec 09, 2012 8:02 am
- Location: Concord N Carolina
Re: GL 1100 Cut, weld, wrench then ride
Hello Kev,
Thanks for following my AstroWing build. This website has been a great resource for me. Also a bunch of cool guys hang out here. Good luck with your project.
I did get a few minutes in my garage last Friday, made a table.
Thanks for following my AstroWing build. This website has been a great resource for me. Also a bunch of cool guys hang out here. Good luck with your project.
I did get a few minutes in my garage last Friday, made a table.
- Attachments
-
- image.jpeg (33.05 KiB) Viewed 334 times
Have lots of bikes... need one more.
- CYBORG
- Moderator
- Posts: 24552
- Joined: Mon Jan 14, 2008 12:52 pm
- Location: Muskegon mich
Re: GL 1100 Cut, weld, wrench then ride
I like the table. Gives me an idea for an old crankshaft I have laying around
1978 custom GL1000
1977 custom with 1200 engine
1985 gl1200
1977 custom with 1200 engine
1985 gl1200
-
- Similar Topics
- Replies
- Views
- Last post
-
- 45 Replies
- 6680 Views
-
Last post by Paola Zago
-
- 17 Replies
- 1039 Views
-
Last post by Sidecar Bob
-
- 2 Replies
- 269 Views
-
Last post by mensor