GL1000 build - soon to be Fuel Injected
Moderators: sunnbobb, Neil, Forum Moderators
-
- Cast Iron Member
- Posts: 82
- Joined: Tue Dec 18, 2018 9:35 am
- Location: South Africa
GL1000 build - soon to be Fuel Injected
Hey guys,
Been lurking here a short while and decided to start a build thread. Hopefully it will also force me to keep momentum going on the project. You know how it can be with life keeping you busy at times....
Anyways, picked up this '75 gl1000 a year ago and it sat in my garage all this time while I'm building and renovating my house. It hasn't run in about 10 years according to the previous owner.
couple of pics of her as I got her:
Managed to start her up using starer fluid. (Fuel tank was 1/4 full of old gas. Needless to say it was nasty and rusted). Compression test checked out "ok", so I went ahead and started tearing her down:
Plan is to put her on a fair diet, and yes, fuel injection. Mainly because I know nothing about carbs, and would like the bike to be modern and reliable.
Been lurking here a short while and decided to start a build thread. Hopefully it will also force me to keep momentum going on the project. You know how it can be with life keeping you busy at times....
Anyways, picked up this '75 gl1000 a year ago and it sat in my garage all this time while I'm building and renovating my house. It hasn't run in about 10 years according to the previous owner.
couple of pics of her as I got her:
Managed to start her up using starer fluid. (Fuel tank was 1/4 full of old gas. Needless to say it was nasty and rusted). Compression test checked out "ok", so I went ahead and started tearing her down:
Plan is to put her on a fair diet, and yes, fuel injection. Mainly because I know nothing about carbs, and would like the bike to be modern and reliable.
'75 GL1000 project, '82 Kawasaki GT750 turbo project.
ex: K6 GSXR1000, '07 Hyabusa
ex: K6 GSXR1000, '07 Hyabusa
-
- Cast Iron Member
- Posts: 82
- Joined: Tue Dec 18, 2018 9:35 am
- Location: South Africa
Re: GL1000 build - soon to be Fuel Injected
Removed the engine, removed the carbs. Valves look dirty if i look down the intake ports so heads will have to come off.
There also seems to be an oil leak from the front cover, so pulled that off too. Fuel pump is the old style but seems solid.
The oil strainer needed some effort to get out. Impact screwdriver and large hammer to be specific. NO WAY those phillips screws are going back on! The strainer itself seemed relatively clean of debris.
There also seems to be an oil leak from the front cover, so pulled that off too. Fuel pump is the old style but seems solid.
The oil strainer needed some effort to get out. Impact screwdriver and large hammer to be specific. NO WAY those phillips screws are going back on! The strainer itself seemed relatively clean of debris.
'75 GL1000 project, '82 Kawasaki GT750 turbo project.
ex: K6 GSXR1000, '07 Hyabusa
ex: K6 GSXR1000, '07 Hyabusa
-
- Cast Iron Member
- Posts: 82
- Joined: Tue Dec 18, 2018 9:35 am
- Location: South Africa
Re: GL1000 build - soon to be Fuel Injected
'75 GL1000 project, '82 Kawasaki GT750 turbo project.
ex: K6 GSXR1000, '07 Hyabusa
ex: K6 GSXR1000, '07 Hyabusa
- wog
- Platinum Member
- Posts: 1766
- Joined: Fri Sep 16, 2011 9:08 am
- Location: FL
Re: GL1000 build - soon to be Fuel Injected
Looking good!
Glad another one is saved. Are you planning on using the fuel injection system from a GL1200 LTD or SEI?
Glad another one is saved. Are you planning on using the fuel injection system from a GL1200 LTD or SEI?
Great to keep these old 'Wings flying on down the road.
-
- Cast Iron Member
- Posts: 82
- Joined: Tue Dec 18, 2018 9:35 am
- Location: South Africa
Re: GL1000 build - soon to be Fuel Injected
The plan is to use these k1200gt bmw itb’s. They can seperate into 4 individual units. Spacing is very close to the gl but I’ll need to extend the fuel rails and linkages about 5-10mm to get it spot on.
I’m using a bosch high pressure fuel pump and a local standalone engine management system to run it all.
I’m using a bosch high pressure fuel pump and a local standalone engine management system to run it all.
'75 GL1000 project, '82 Kawasaki GT750 turbo project.
ex: K6 GSXR1000, '07 Hyabusa
ex: K6 GSXR1000, '07 Hyabusa
- pidjones
- SUPER BIKER!!!!
- Posts: 3237
- Joined: Wed May 22, 2013 4:06 pm
- Location: East TN
Re: GL1000 build - soon to be Fuel Injected
Following with interest. Can't tell how well done the airbrush detail was done, but I LIKE it! Oh, please - throw the Phillips screwdriver bits away and buy JIS bits! This engine does NOT use Phillips screws - they are JIS and you will find they work MUCH better with the correct bits. Motion Pro makes both #2 and #3 JIS bits in 1/4" hex. I bought mine on Amazon, and use the fool out of them. With the #3 in and adapter n a Tee handle, I seldom need an impact driver on the larger ones.
"Love 'em all.... let God sort 'em out!"
Ex 2006 GL1800 - the Black Pearl SOLD! to make room for:
2021 Can-Am Spyder RT Limited Dark Chalk Metallic
1975 Red GL1000 project - ex Pistol Pete project
1972 Triumph T150V Trident rescue - finished and FOR SALE!
1976 Yamaha RD400c
1978 GL1000 with '75 engine - the Hunley
Ex 1978 GL1000
Ex 1979 GL1000
Ex '79 CB750F rat bike
Ex '86 SEi
Ex '77 GL1000
Ex '76 RD400
Ex '72 Penton 125 set up for flat track
Ex '73 RD250
Ex '68 TR6C - chopped
Ex 2006 GL1800 - the Black Pearl SOLD! to make room for:
2021 Can-Am Spyder RT Limited Dark Chalk Metallic
1975 Red GL1000 project - ex Pistol Pete project
1972 Triumph T150V Trident rescue - finished and FOR SALE!
1976 Yamaha RD400c
1978 GL1000 with '75 engine - the Hunley
Ex 1978 GL1000
Ex 1979 GL1000
Ex '79 CB750F rat bike
Ex '86 SEi
Ex '77 GL1000
Ex '76 RD400
Ex '72 Penton 125 set up for flat track
Ex '73 RD250
Ex '68 TR6C - chopped
-
- Zinc Member
- Posts: 36
- Joined: Tue Nov 20, 2018 11:29 pm
Re: GL1000 build - soon to be Fuel Injected
Marked this thread. Keep us informed of the progress!
82 GL1100 Standard 44k miles 83 wheels & forks
-
- Cast Iron Member
- Posts: 82
- Joined: Tue Dec 18, 2018 9:35 am
- Location: South Africa
Re: GL1000 build - soon to be Fuel Injected
Thanks. Very interesting. I live in South Africa though and i doubt I’ll find these JiS bits here. I’m just going to replace everything with allen or hex bolts where i can.pidjones wrote:Following with interest. Can't tell how well done the airbrush detail was done, but I LIKE it! Oh, please - throw the Phillips screwdriver bits away and buy JIS bits! This engine does NOT use Phillips screws - they are JIS and you will find they work MUCH better with the correct bits. Motion Pro makes both #2 and #3 JIS bits in 1/4" hex. I bought mine on Amazon, and use the fool out of them. With the #3 in and adapter n a Tee handle, I seldom need an impact driver on the larger ones.
Airbrushing looks ok, but right faux tank paint is damaged, so I’ll be respraying the entire faux tank in something more modern once the mechanical side of things is completed.
'75 GL1000 project, '82 Kawasaki GT750 turbo project.
ex: K6 GSXR1000, '07 Hyabusa
ex: K6 GSXR1000, '07 Hyabusa
- pidjones
- SUPER BIKER!!!!
- Posts: 3237
- Joined: Wed May 22, 2013 4:06 pm
- Location: East TN
Re: GL1000 build - soon to be Fuel Injected
JIS bits are available world-wide. Japanese Industrial Standard, I believe. And Amazon will ship!
"Love 'em all.... let God sort 'em out!"
Ex 2006 GL1800 - the Black Pearl SOLD! to make room for:
2021 Can-Am Spyder RT Limited Dark Chalk Metallic
1975 Red GL1000 project - ex Pistol Pete project
1972 Triumph T150V Trident rescue - finished and FOR SALE!
1976 Yamaha RD400c
1978 GL1000 with '75 engine - the Hunley
Ex 1978 GL1000
Ex 1979 GL1000
Ex '79 CB750F rat bike
Ex '86 SEi
Ex '77 GL1000
Ex '76 RD400
Ex '72 Penton 125 set up for flat track
Ex '73 RD250
Ex '68 TR6C - chopped
Ex 2006 GL1800 - the Black Pearl SOLD! to make room for:
2021 Can-Am Spyder RT Limited Dark Chalk Metallic
1975 Red GL1000 project - ex Pistol Pete project
1972 Triumph T150V Trident rescue - finished and FOR SALE!
1976 Yamaha RD400c
1978 GL1000 with '75 engine - the Hunley
Ex 1978 GL1000
Ex 1979 GL1000
Ex '79 CB750F rat bike
Ex '86 SEi
Ex '77 GL1000
Ex '76 RD400
Ex '72 Penton 125 set up for flat track
Ex '73 RD250
Ex '68 TR6C - chopped
-
- Cast Iron Member
- Posts: 82
- Joined: Tue Dec 18, 2018 9:35 am
- Location: South Africa
Re: GL1000 build - soon to be Fuel Injected
I did the hydrochloric acid treatment on the tank. Worked well. Was nasty though and tank flash rusted afterwards. So i had it relined professionally.
They used a clear epoxy lining and i can still see the ood flash rust underneath the epoxy coating. But they assure me it is good to go now.
They used a clear epoxy lining and i can still see the ood flash rust underneath the epoxy coating. But they assure me it is good to go now.
'75 GL1000 project, '82 Kawasaki GT750 turbo project.
ex: K6 GSXR1000, '07 Hyabusa
ex: K6 GSXR1000, '07 Hyabusa
- pidjones
- SUPER BIKER!!!!
- Posts: 3237
- Joined: Wed May 22, 2013 4:06 pm
- Location: East TN
Re: GL1000 build - soon to be Fuel Injected
Hopefully they protected the intake screens.GT-Ron wrote:I did the hydrochloric acid treatment on the tank. Worked well. Was nasty though and tank flash rusted afterwards. So i had it relined professionally.
They used a clear epoxy lining and i can still see the ood flash rust underneath the epoxy coating. But they assure me it is good to go now.
"Love 'em all.... let God sort 'em out!"
Ex 2006 GL1800 - the Black Pearl SOLD! to make room for:
2021 Can-Am Spyder RT Limited Dark Chalk Metallic
1975 Red GL1000 project - ex Pistol Pete project
1972 Triumph T150V Trident rescue - finished and FOR SALE!
1976 Yamaha RD400c
1978 GL1000 with '75 engine - the Hunley
Ex 1978 GL1000
Ex 1979 GL1000
Ex '79 CB750F rat bike
Ex '86 SEi
Ex '77 GL1000
Ex '76 RD400
Ex '72 Penton 125 set up for flat track
Ex '73 RD250
Ex '68 TR6C - chopped
Ex 2006 GL1800 - the Black Pearl SOLD! to make room for:
2021 Can-Am Spyder RT Limited Dark Chalk Metallic
1975 Red GL1000 project - ex Pistol Pete project
1972 Triumph T150V Trident rescue - finished and FOR SALE!
1976 Yamaha RD400c
1978 GL1000 with '75 engine - the Hunley
Ex 1978 GL1000
Ex 1979 GL1000
Ex '79 CB750F rat bike
Ex '86 SEi
Ex '77 GL1000
Ex '76 RD400
Ex '72 Penton 125 set up for flat track
Ex '73 RD250
Ex '68 TR6C - chopped
- ericheath
- Honored Life Member
- Posts: 9580
- Joined: Wed Jul 29, 2009 11:20 am
- Location: Winnipeg, Manituba
Re: GL1000 build - soon to be Fuel Injected
Looking forward to watching this too. I gave up trying to understand EFI, carbs are easier.
Whatever I suggest here should be given ample time for a moderator to delicately correct. I apologize in advance.
77 WING, 1200 engine with 77 heads, cams, gl1100 foot pegs, Magna V65 front end, 764A carbs, [-gone Suzuki M109 monoshock--, replaced with gl1100 shocks] gl 1200 swing arm, gl1500 final drive, wheel and rear brakes Valkyrie seat, Meanstreak tank, Sportster pipes, Power Arc ignition off crank.
77 Wing. black
83 Wing, in pieces
"Continuing education is important even if the subject matter is fairly useless (as in this case)."---Greg Foresi
77 WING, 1200 engine with 77 heads, cams, gl1100 foot pegs, Magna V65 front end, 764A carbs, [-gone Suzuki M109 monoshock--, replaced with gl1100 shocks] gl 1200 swing arm, gl1500 final drive, wheel and rear brakes Valkyrie seat, Meanstreak tank, Sportster pipes, Power Arc ignition off crank.
77 Wing. black
83 Wing, in pieces
"Continuing education is important even if the subject matter is fairly useless (as in this case)."---Greg Foresi
- Sugs
- Gold Member
- Posts: 1069
- Joined: Sun Aug 09, 2015 6:12 pm
- Location: Springfield, MO
Re: GL1000 build - soon to be Fuel Injected
Time to get the popcorn out...
_______________________
'79 Honda GL1000 Goldwing
'79 Honda GL1000 Goldwing
-
- Cast Iron Member
- Posts: 82
- Joined: Tue Dec 18, 2018 9:35 am
- Location: South Africa
Re: GL1000 build - soon to be Fuel Injected
I didn’t really check. But the new fuel pump will fit in tank so the screens are now obsolete anyways.pidjones wrote: Hopefully they protected the intake screens.
'75 GL1000 project, '82 Kawasaki GT750 turbo project.
ex: K6 GSXR1000, '07 Hyabusa
ex: K6 GSXR1000, '07 Hyabusa
-
- Cast Iron Member
- Posts: 82
- Joined: Tue Dec 18, 2018 9:35 am
- Location: South Africa
Re: GL1000 build - soon to be Fuel Injected
Haha i feel the same, but about understanding carbs. I guess its a black art that is lost on my generation.ericheath wrote:Looking forward to watching this too. I gave up trying to understand EFI, carbs are easier.
'75 GL1000 project, '82 Kawasaki GT750 turbo project.
ex: K6 GSXR1000, '07 Hyabusa
ex: K6 GSXR1000, '07 Hyabusa
-
- Similar Topics
- Replies
- Views
- Last post