KickStart Pivot Felt Rings?

cross over parts from other wings, hondas, or any other parts sources that can be used on our wings.

Moderators: robin1731, Rat, Forum Moderators

Post Reply
rockyhayes
Cast Iron Member
Cast Iron Member
Posts: 70
Joined: Thu Apr 23, 2020 8:48 am

KickStart Pivot Felt Rings?

#1

Post by rockyhayes »

Anybody by chance have a bead on these? They are #16 in the schematic, and otherwise appear obsolete. It's thus far been virtually impossible for me to determine if they are included with any of the aftermarket complete gasket sets...

HONDA - DUST SEAL, JOINT 28246-371-000
felts.JPG
You do not have the required permissions to view the files attached to this post.
Present: 77 GL1000 x 2, 75 GL1000 x 2, 13 R1200RT
Past: 03 ST1300, 94 R1100RS, 97 F650, 84 GL1200, 86 XJ700X, 72 KZ900, 69 CB750
User avatar
flyin900
Gold Member
Gold Member
Posts: 1057
Joined: Sun Jan 10, 2010 3:50 pm
Location: Barrie Ontario - Canada

Re: KickStart Pivot Felt Rings?

#2

Post by flyin900 »

They are dust seals and if yours are still in there I would just go with those on the refresh. I am not aware of any replacements that come in any gasket set.
Another option is the felt seals used on a variety of Honda rear brake plates where the shaft for the brake shoes comes through the plate and they are still available new from Honda. (ie) A 1978 CB550K has a rear brake plate with the felt seal that I just bought from Honda recently.
This seal will likely fit into that area on the GL1000. You may need to patch a couple together if the size is off and your seals are rotted away. It would serve the purpose and as noted they are dust/dirt seals for the kicker shaft only.

Honda part 43134-300-000 for $1.93 each from Partzilla or your favorite Hondas source.
Current Bikes:
1967 CL175 Low production number with #802 as engine serial- winter 2019/2020 project.
1978 CB550K Very original bike with only 7499 klms from new- light cleanup and refresh pending.
1981 GL1100 Standard model - Sept 2018 start of cosmetic refresh, nice original condition.
1983 CB1000 Custom-Low mileage full cosmetic restoration back to factory new.
1984 GL1200 Standard model in showroom condition-two owner bike.
1984 CX650E Restored summer 2017 - a rare Eurosport model-excellent one owner bike.
User avatar
pidjones
True Blue Steel Biker
True Blue Steel Biker
Posts: 2085
Joined: Wed May 22, 2013 4:06 pm
Location: East TN

Re: KickStart Pivot Felt Rings?

#3

Post by pidjones »

Felt from a fabric store and a couple gasket cutters should have you set.
"Love 'em all.... let God sort 'em out!"
1976 Yamaha RD400c - rolling basket case winter '20-'21 project
1978 GL1000 - winter project for 2020 challenge - SOLD!
2006 GL1800 - the Black Pearl
1979 GL1000 project - to be restored
1978 GL1000 with '75 engine - the Hunley
Ex '79 CB750F rat bike - the Rocket - SOLD!
Ex '86 SEi
Ex '77 GL1000
Ex '76 RD400
Ex '72 Penton 125 set up for flat track
Ex '73 RD250
Ex '68 TR6C - chopped
Post Reply

Return to “Parts Reference Forum”