CROSS OVER PARTS LIST

cross over parts from other wings, hondas, or any other parts sources that can be used on our wings.

Moderators: robin1731, Rat, Forum Moderators

Post Reply
User avatar
Whiskerfish
President
President
Posts: 36827
Joined: Thu Feb 16, 2006 9:34 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/whiskerfish/
Location: Norfolk Va

Re: CROSS OVER PARTS LIST

#166

Post by Whiskerfish »

cmclemore_2007 wrote:Don't know if the guys at my napa are idiots or not but they can't find the spark plug boots by that number. Any ideas guys?
https://www.napaonline.com/en/p/NGW8072
"Agreement is not a requirement for Respect" CDR Michael Smith USN (Ret) 2017
"The book is wrong, this whole Conclusion is Fallacious" River Tam
2008 GL1800 IIIA "TH3DOG"
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
and a whole garage full of possibilities!!

Psst. oh and by the way CHANGE YOUR BELTS!!!!
Black Hills
Tin Member
Tin Member
Posts: 19
Joined: Thu Apr 15, 2010 11:24 pm
Location: Cave Creek, AZ

Re: CROSS OVER PARTS LIST

#167

Post by Black Hills »

Could not find this in the forum but if there sorry for the duplication.

1977 GL1000 Thermostat Housing O-Ring is Fel-Pro 35316.
Attachments
Part listing with cars it fits
Part listing with cars it fits
IMG_4612.jpg (64.65 KiB) Viewed 9357 times
Side by side the old o-ring
Side by side the old o-ring
IMG_4616.jpg (133.86 KiB) Viewed 9357 times
Installed in the thermostat housing
Installed in the thermostat housing
IMG_4617.jpg (91.08 KiB) Viewed 9357 times
User avatar
5speed
Honored Life Member
Honored Life Member
Posts: 5311
Joined: Sat Jul 11, 2015 2:37 pm
Location: Nova Scotia Canada

Re: CROSS OVER PARTS LIST

#168

Post by 5speed »

u joints for 1000 drive shaft
neapco u joint 1-0475
Moog #405
1982 1100 standard. (sold)
1986 Yamaha FJ1200
2000 Yamaha Roadstar
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
2019 Can-Am ryker (boss's new ride)

2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
User avatar
Old Fogey
Honored Life Member
Honored Life Member
Posts: 7698
Joined: Mon Aug 27, 2007 11:31 pm
Location: Glasgow, Scotland
Contact:

Re: CROSS OVER PARTS LIST

#169

Post by Old Fogey »

5speed wrote: Mon Dec 28, 2020 2:01 pm u joints for 1000 drive shaft
neapco u joint 1-0475
Moog #405
Not sure how the Neapco joint would work.

The Moog might, although it's a snap ring retained joint and there's no grooves in the U/J to take the rings.
The correct joint is a 1944 like this, intended to be staked. https://www.driveshaftparts.co.uk/index ... ct_id=2292

BUT...... not saying this is what you should buy! You have to be careful in what you are buying because many of the joints of this size are intended for auto steering joints and simply not up to transmitting 80bhp! The best is the one that BMW used in their early bikes, which is priced at around £80 / $110. Some ATVs also use joints of this size.
"Impossible Is Just a Level of Difficulty!..."
If I'd wanted you to understand, I would have explained it better! (Johann Cruyff)
I’d give my right arm to be ambidextrous! :-D
User avatar
5speed
Honored Life Member
Honored Life Member
Posts: 5311
Joined: Sat Jul 11, 2015 2:37 pm
Location: Nova Scotia Canada

Re: CROSS OVER PARTS LIST

#170

Post by 5speed »

going by Eric's post.
those BMW one's aren't cheap. :shock:
viewtopic.php?f=1&t=75765#p788921
1982 1100 standard. (sold)
1986 Yamaha FJ1200
2000 Yamaha Roadstar
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
2019 Can-Am ryker (boss's new ride)

2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
User avatar
pidjones
SUPER BIKER!!!!
SUPER BIKER!!!!
Posts: 3236
Joined: Wed May 22, 2013 4:06 pm
Location: East TN

Re: CROSS OVER PARTS LIST

#171

Post by pidjones »

The Neapco and Moog are both listed on Amazon.
"Love 'em all.... let God sort 'em out!"
Ex 2006 GL1800 - the Black Pearl SOLD! to make room for:
2021 Can-Am Spyder RT Limited Dark Chalk Metallic
1975 Red GL1000 project - ex Pistol Pete project
1972 Triumph T150V Trident rescue - finished and FOR SALE!
1976 Yamaha RD400c
1978 GL1000 with '75 engine - the Hunley
Ex 1978 GL1000
Ex 1979 GL1000
Ex '79 CB750F rat bike
Ex '86 SEi
Ex '77 GL1000
Ex '76 RD400
Ex '72 Penton 125 set up for flat track
Ex '73 RD250
Ex '68 TR6C - chopped
TheChewy
Lead Member
Lead Member
Posts: 4
Joined: Fri May 17, 2019 7:58 pm

Re: CROSS OVER PARTS LIST

#172

Post by TheChewy »

Black Hills wrote: Fri Sep 06, 2019 5:57 pm Could not find this in the forum but if there sorry for the duplication.

1977 GL1000 Thermostat Housing O-Ring is Fel-Pro 35316.
also works for the 1100 engines as well.
nicdes
Cast Iron Member
Cast Iron Member
Posts: 59
Joined: Thu Jan 27, 2022 5:23 pm
Location: Haute-Savoie France

Re:

#173

Post by nicdes »

Roady wrote: Thu Aug 09, 2007 10:46 pm Compiled from this thread and other contributions ... This list is actively updated as suggestions are made in this thread.

Head Gasket Job, Part Numbers, our thanks to Alwing17 for these.
  • Qty - - - Part # - - - - - Description
    .....
    4 -- 18291-386-306 -- gasket, exhaust
    .....
the part num for the exhaust gasket is 18291-286-306
4 -- 18291-286-306 -- gasket, exhaust
GL1000 1976 - smooth and unstoppable, be aware ur safety distance ;)
SRX 600 1987 - stroke and agility, catch me if u can
https://www.youtube.com/channel/UCMB875 ... WWNj5MtKAw
https://soundcloud.com/nicdes
Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “Parts Reference Forum”