looking for a source...

cross over parts from other wings, hondas, or any other parts sources that can be used on our wings.

Moderators: robin1731, RAT, Forum Moderators

heraldhamster
Honored Life Member
Honored Life Member
Posts: 4396
Joined: Wed Jun 28, 2006 2:52 pm
Location: up by the Canadian border in WA state

looking for a source...

Post #1 by heraldhamster » Sun Apr 12, 2009 8:34 pm

anybody know where I might find JUST the crimp-on type of terminals for the ignition coil end of spark plug wires?

they usually come with a set of plug wires, and I found a place to buy them by the hundred lot for $26, but I don't need a hundred of them.

I've been to NAPA & our local auto parts store. they all just looked at me funny. I assumed that most parts stores would carry them, but I guess the majority of people usually buy pre-made, ready to install wire sets.

thanks!
...jm.
sorta bulldogged custom 1978 GL1000 - "geekster" - daily rider
full Vetter dress 1979 GL1000 - "Barge" - daily rider (currently down)
1986 1200 Aspencade - "Heart of Gold"
1990 1500 Aspencade - Tupperware basket case so far
1978 for $100 - project in worx
1978 from a previous member here - taking up space
my original '79 bought in '91 - replacing engine (eventually, maybe someday)

H2G2=42

A competent and self-confident person is incapable of jealousy in anything. Jealousy is invariably a symptom of neurotic insecurity. ~ Robert A. Heinlein

The good thing about science is that it's true whether or not you believe in it. ~ Neil deGrasse Tyson

User avatar
sodbuster
Gold Member
Gold Member
Posts: 1316
Joined: Sun Jul 09, 2006 10:34 pm
Location: S. Haven, Mn

Post #2 by sodbuster » Sun Apr 12, 2009 9:19 pm

How 'bout any place that does Auto Repair ......... sometimes they will have items like that on hand to repair one spark plug wire.
'06 H-D Road King
'99 Valkyrie Standard - TOTALED :(
'83 GL1100 Standard - SOLD
'82 CB900F - Black & Red - SOLD

User avatar
starket
Moderator
Moderator
Posts: 5954
Joined: Mon Jun 16, 2008 2:52 pm
Location: Battle Ground, WA

Post #3 by starket » Mon Apr 13, 2009 8:55 am

I searched NAPA online and got these results.
The search returned 4 hits. Displayed are results 1 to 4.<<Previous>>
Product Name Item Number Price Select
Spark Plug Wire Terminal - Distributor
Available at NAPA stores. This part can only be purchased from your local NAPA AUTO PARTS Store.

BEL
727003

Spark Plug Wire Terminal - Distributor
Available at NAPA stores. This part can only be purchased from your local NAPA AUTO PARTS Store.

BEL
727004


Spark Plug Wire Terminal - Distributor
Available at NAPA stores. This part can only be purchased from your local NAPA AUTO PARTS Store.

BEL
727008

Spark Plug Wire Terminal - Distributor
Available at NAPA stores. This part can only be purchased from your local NAPA AUTO PARTS Store.

BEL
727305

Quantity is 10 -100 depending on which number. If you don't have any luck, let me know. I will check at one of our local parts stores in Portland that is pretty good.
Steve Tarket
1975 GL1000 Restoration
1976 GL1000 LTD
1976 GL1000 - Jigsaw +
Proud Member of the NGW Cartel

User avatar
starket
Moderator
Moderator
Posts: 5954
Joined: Mon Jun 16, 2008 2:52 pm
Location: Battle Ground, WA

Post #4 by starket » Mon Apr 13, 2009 9:03 am

Steve Tarket
1975 GL1000 Restoration
1976 GL1000 LTD
1976 GL1000 - Jigsaw +
Proud Member of the NGW Cartel

User avatar
CYBORG
Moderator
Moderator
Posts: 21989
Joined: Mon Jan 14, 2008 12:52 pm
Location: Muskegon mich

Post #5 by CYBORG » Mon Apr 13, 2009 9:06 am

how many you need. i got a bunch of them in my shop.
1978 custom GL1000
1977 custom with 1200 engine
1985 gl1200

User avatar
sunnbobb
Facebook Admin
Facebook Admin
Posts: 20986
Joined: Thu Jan 10, 2008 4:09 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/sunnbobb/
Location: LaConner, WA

Post #6 by sunnbobb » Mon Apr 13, 2009 10:16 am

Your local lawnmower repair shop might..
I found the end of the internet

---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!

1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)

heraldhamster
Honored Life Member
Honored Life Member
Posts: 4396
Joined: Wed Jun 28, 2006 2:52 pm
Location: up by the Canadian border in WA state

Post #7 by heraldhamster » Mon Apr 13, 2009 10:19 am

see, this is exactly what I need
Image
and I went to the local Checker/Schuck's/Kragen yadda, yadda, yadda.
thanks Steve!
I tried the local NAPA store too. maybe I was asking for the wrong thing...



for now I only need 4. can I PayPal ya CYBORG?
sorta bulldogged custom 1978 GL1000 - "geekster" - daily rider
full Vetter dress 1979 GL1000 - "Barge" - daily rider (currently down)
1986 1200 Aspencade - "Heart of Gold"
1990 1500 Aspencade - Tupperware basket case so far
1978 for $100 - project in worx
1978 from a previous member here - taking up space
my original '79 bought in '91 - replacing engine (eventually, maybe someday)

H2G2=42

A competent and self-confident person is incapable of jealousy in anything. Jealousy is invariably a symptom of neurotic insecurity. ~ Robert A. Heinlein

The good thing about science is that it's true whether or not you believe in it. ~ Neil deGrasse Tyson

User avatar
sodbuster
Gold Member
Gold Member
Posts: 1316
Joined: Sun Jul 09, 2006 10:34 pm
Location: S. Haven, Mn

Post #8 by sodbuster » Sat Jun 20, 2009 7:57 am

This ever get resolved ??
'06 H-D Road King
'99 Valkyrie Standard - TOTALED :(
'83 GL1100 Standard - SOLD
'82 CB900F - Black & Red - SOLD

ElPiloto
True Blue Steel Biker
True Blue Steel Biker
Posts: 2085
Joined: Fri Apr 06, 2007 4:01 pm
Location: Southern Arizona

Post #9 by ElPiloto » Sat Jun 20, 2009 12:45 pm

I would try JEG'S or SUMMIT.
"Some Cats Got it, Some Cats Ain't"

User avatar
oldthing
Cast Iron Member
Cast Iron Member
Posts: 93
Joined: Sun Jan 24, 2010 2:58 pm
Location: Blaine, WA, USA

Re: looking for a source...

Post #10 by oldthing » Fri Jan 29, 2010 10:28 am

C'mon up to my store, James, I'll fix you up. Sorry we didn't get them to you the first time, if you tried us, we've had them all along. I have the clips, not the boots, but we can come up with them.
___________
Happy riding,
Kirk

heraldhamster
Honored Life Member
Honored Life Member
Posts: 4396
Joined: Wed Jun 28, 2006 2:52 pm
Location: up by the Canadian border in WA state

Re: looking for a source...

Post #11 by heraldhamster » Fri Jan 29, 2010 11:21 am

cool. thanks, man. sorry, when I said "local," it was the store in B'ham.
heck, that was 6 months ago... I don't even off the top of my head remember why I needed them... it might be for the Honda Civic project that I have yet to start on. so, I'll drop by.
sorta bulldogged custom 1978 GL1000 - "geekster" - daily rider
full Vetter dress 1979 GL1000 - "Barge" - daily rider (currently down)
1986 1200 Aspencade - "Heart of Gold"
1990 1500 Aspencade - Tupperware basket case so far
1978 for $100 - project in worx
1978 from a previous member here - taking up space
my original '79 bought in '91 - replacing engine (eventually, maybe someday)

H2G2=42

A competent and self-confident person is incapable of jealousy in anything. Jealousy is invariably a symptom of neurotic insecurity. ~ Robert A. Heinlein

The good thing about science is that it's true whether or not you believe in it. ~ Neil deGrasse Tyson


Return to “Parts Reference Forum”

Who is online

Users browsing this forum: No registered users and 2 guests