Oil Drain Plug Washer Alternates, by KWATTS

cross over parts from other wings, hondas, or any other parts sources that can be used on our wings.

Moderators: robin1731, Rat, Forum Moderators

Post Reply
User avatar
Rat
Photo Gallery Admin
Photo Gallery Admin
Posts: 15456
Joined: Fri Oct 21, 2005 9:59 pm
My Album: https://www.ngwclub.com/gallery/v/wingmans/rat/
RIP: cookie
Location: Toronto .... Canada

Oil Drain Plug Washer Alternates, by KWATTS

#1

Post by Rat »

The drain plug washer used by Honda on our bikes, (the 1000, 1100 & 1200), is also used for many Honda car models. If you go to this site ->

http://www.hondapartsnow.com/

<- and enter in the part # 94109-14000, then drill down to the info you will see all of the car models that use this same part. I have found that many o-rings and washers from the bikes can be cross-referenced to a car application. So I imagine that you can get a OEM washer from a local Honda dealer, or at least you can go to NAPA and get one for one of the cars listed.

_________________
KWatts
'85 GL1200 Interstate
"I'd rather Ride than Shine"
‘14 KLR650 ... not a rat ... yet
‘84 GL1200i ‘R2B6' (Rat to Be 6, the last, adopted by twowings)
My Original 'RAT' was a hybrid '82 CB900/1100F
User avatar
Roady
Member Relations &_Graphics
Member Relations &_Graphics
Posts: 11957
Joined: Wed Jun 20, 2007 2:35 pm
Location: Port St. John, FL

Re: Oil Drain Plug Washer Alternates, by KWATTS

#2

Post by Roady »

I got mine at Ace Hdwr for 50¢. So I got a spare.

But then with tax it was over a buck.

So I tried to spend the change but a soda put it over two.

Then I got distracted by the chain saws.

I spent a Benjamin just to get out of that place.
Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “Parts Reference Forum”