750 to GL

cross over parts from other wings, hondas, or any other parts sources that can be used on our wings.

Moderators: robin1731, Rat, Forum Moderators

Post Reply
User avatar
matalex60
Gold Member
Gold Member
Posts: 1202
Joined: Thu May 06, 2010 1:24 pm
Location: Farwell Texas

750 to GL

#1

Post by matalex60 »

What parts can be crossed from 1970's CB 750's and other models to the 70's GL. I have a set of 76 CB 750 shocks on my 75' GL1000 now. Just wondering what else can be swapped?
Matalex

Current Bikes:
1975 GL1000 Bobber
1975 GL1000 Candy Blue Green Restoration
1977 GL1000 Black Restoration
1984 GL1200 Interstate all original
User avatar
philjimpot
Cast Iron Member
Cast Iron Member
Posts: 99
Joined: Sun Jan 24, 2010 11:02 am
Location: N.E. Ohio

Re: 750 to GL

#2

Post by philjimpot »

- Spark Plugs
- Oil filters - same filter on both (Use Once)
- Tappet covers on 750 = Final drive filler cap and Stator access on GL1000
- Turn signal assemblies
- Tail light assembly
- Front brake rotors (I think - I don't know for sure)
- Horn
- Front Foot pegs (not certian)
- Crush washers for the exhaust manifolds (Use Once)
- Brake line crush washers (Use Once)
- Misc. hardware
- Oil (use once)
- Air in the tires

I think that is about it!
1975 CB750 (Cafe Racer) http://s236.photobucket.com/albums/ff11 ... =slideshow
1977 GL1000
Post Reply

Return to “Parts Reference Forum”