I do not know if this is helpfull but I am rebuilding a set of 84 GL 1200 I carbs to try on my bike and was looking for new Pilot jets rather than cleaning them and I will also replace the Needle and seat sets. I found a place called PJ Motorsport that has been helpfull and there prices are much better than the local dealer. I do not know if they can help with slides or diaphrams ( I do not believe so ) But they were helpfull and courtious to work with. Pilot jets were around $6 and needle and seats were $14. the items I have purchased from them so far are Kehin factory parts and do not look like re-pops. I have not received the needle sets yet ( ordered yesterday ) Has anyone else worked with them?
www.pjmotorsports.com
Kehin carb parts
Moderators: robin1731, Rat, Forum Moderators
- salukispeed
- Platinum Member
- Posts: 1951
- Joined: Sun Feb 21, 2010 10:08 am
- Location: Oak Forest Illinois US
Kehin carb parts
Honda 72 CL100 sold
74 CB750 K4 nice driver
1966 CA77/305 Dream nostalgic driver
84 GL1200I work in progress
1970 CT 70
1982 GL500 Interstate
74 CB750 K4 nice driver
1966 CA77/305 Dream nostalgic driver
84 GL1200I work in progress
1970 CT 70
1982 GL500 Interstate
- Whiskerfish
- President
- Posts: 36852
- Joined: Thu Feb 16, 2006 9:34 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/whiskerfish/
- Location: Norfolk Va
Re: Kehin carb parts
Never heard of them but it is a nice looking site!!
"Agreement is not a requirement for Respect" CDR Michael Smith USN (Ret) 2017
"The book is wrong, this whole Conclusion is Fallacious" River Tam
2008 GL1800 IIIA "TH3DOG"
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
and a whole garage full of possibilities!!
Psst. oh and by the way CHANGE YOUR BELTS!!!!
"The book is wrong, this whole Conclusion is Fallacious" River Tam
2008 GL1800 IIIA "TH3DOG"
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
and a whole garage full of possibilities!!
Psst. oh and by the way CHANGE YOUR BELTS!!!!
- salukispeed
- Platinum Member
- Posts: 1951
- Joined: Sun Feb 21, 2010 10:08 am
- Location: Oak Forest Illinois US
Re: Kehin carb parts
Just FYI
Got the carb needles in 3 days and they look and measure perfect. I will swap them for the 26 year old nasty ones. ( It was my mistake when I thought I ordered needles and seats ( just needles with clip ) but my seats were terrible to look at but functionally perfect when cleaned up.) So the needles only worked perfect.
Nice people and a good source.
Got the carb needles in 3 days and they look and measure perfect. I will swap them for the 26 year old nasty ones. ( It was my mistake when I thought I ordered needles and seats ( just needles with clip ) but my seats were terrible to look at but functionally perfect when cleaned up.) So the needles only worked perfect.
Nice people and a good source.
Honda 72 CL100 sold
74 CB750 K4 nice driver
1966 CA77/305 Dream nostalgic driver
84 GL1200I work in progress
1970 CT 70
1982 GL500 Interstate
74 CB750 K4 nice driver
1966 CA77/305 Dream nostalgic driver
84 GL1200I work in progress
1970 CT 70
1982 GL500 Interstate
-
- Similar Topics
- Replies
- Views
- Last post
-
- 0 Replies
- 715 Views
-
Last post by Oldtech
-
- 6 Replies
- 281 Views
-
Last post by boogie red
-
- 17 Replies
- 523 Views
-
Last post by Steven UK
-
- 7 Replies
- 258 Views
-
Last post by Stealth126