Had to replace my front crank oil seal and was able to get a NAPA part to fit
NAPA #13954
35x55x8
NAPA part number for front Crank oil seal
Moderators: robin1731, Rat, Forum Moderators
- taylorsel
- Silver Member
- Posts: 655
- Joined: Mon Jun 29, 2009 7:44 am
- Location: Winchester, VA
NAPA part number for front Crank oil seal
STEVE LOGAN, 1979 GOLDWING, 1978 GOLDWING, 1976 GOLDWING
- Roady
- Member Relations &_Graphics
- Posts: 11957
- Joined: Wed Jun 20, 2007 2:35 pm
- Location: Port St. John, FL
Re: NAPA part number for front Crank oil seal
Good find! I added this to the Crossover Parts List.
Do you know if that will fit an 1100 also?
Do you know if that will fit an 1100 also?
- taylorsel
- Silver Member
- Posts: 655
- Joined: Mon Jun 29, 2009 7:44 am
- Location: Winchester, VA
Re: NAPA part number for front Crank oil seal
I don't know but It should don't thing the 1100 changed that much if you have a listing of the size you can compare
STEVE LOGAN, 1979 GOLDWING, 1978 GOLDWING, 1976 GOLDWING
- Roady
- Member Relations &_Graphics
- Posts: 11957
- Joined: Wed Jun 20, 2007 2:35 pm
- Location: Port St. John, FL
Re: NAPA part number for front Crank oil seal
You're right ... I shoulda looked into it myself. It's the same on the 1100.
-
- Similar Topics
- Replies
- Views
- Last post