Gasket set?

cross over parts from other wings, hondas, or any other parts sources that can be used on our wings.

Moderators: robin1731, Rat, Forum Moderators

Post Reply
adam_mott89
Tin Member
Tin Member
Posts: 13
Joined: Tue Jul 17, 2012 7:59 pm
Location: Moundville Alabama

Gasket set?

#1

Post by adam_mott89 »

hey guys i've been looking around for a complete gasket set for my 78 gl1000. I can find the complete set on ebay and saber cycles. But I saw somewhere that the saber cycles gasket set is wrong, and the one on ebay seems fine. but i was wondering where yall would go to get it.

thank you for any help I recieve

Adam Mott
1978 GL1000
User avatar
ole496
Gold Member
Gold Member
Posts: 1043
Joined: Sun Dec 05, 2010 2:52 am
Location: Twin Cities
Contact:

Re: Gasket set?

#2

Post by ole496 »

Here's what I bought, working fine thus far. Some folks would say to stick with OEM headgaskets though.

http://www.siriusconinc.com/pro-detail. ... ct_id=1819
1976 GL1000 "Double Nature" https://youtu.be/IK0YS2uuZtc
Our greatest weakness lies in giving up. The most certain way to succeed is always to try just one more time. -Thomas Edison
User avatar
Placerville
Honored Life Member
Honored Life Member
Posts: 6494
Joined: Tue Feb 02, 2010 9:29 pm

Re: Gasket set?

#3

Post by Placerville »

SCI carries good quality products so, you can do OK with their set. I agree with the comment about OEM head gaskets.
Placerville - 1976 Yellow
Image
Survivor - BOTM - May 2011

New and Confused ?
Push the Big Button
Image
User avatar
ericheath
Honored Life Member
Honored Life Member
Posts: 9580
Joined: Wed Jul 29, 2009 11:20 am
Location: Winnipeg, Manituba

Re: Gasket set?

#4

Post by ericheath »

I think this is a Vesrah kit, but you should call and ask.
http://www.partsnmore.com/parts/honda/g ... ng]=custom
Whatever I suggest here should be given ample time for a moderator to delicately correct. I apologize in advance.
77 WING, 1200 engine with 77 heads, cams, gl1100 foot pegs, Magna V65 front end, 764A carbs, [-gone Suzuki M109 monoshock--, replaced with gl1100 shocks] gl 1200 swing arm, gl1500 final drive, wheel and rear brakes Valkyrie seat, Meanstreak tank, Sportster pipes, Power Arc ignition off crank.
77 Wing. black
83 Wing, in pieces
"Continuing education is important even if the subject matter is fairly useless (as in this case)."---Greg Foresi
User avatar
Hal
True Blue Steel Biker
True Blue Steel Biker
Posts: 2822
Joined: Fri Sep 24, 2010 5:00 pm
Location: France

Re: Gasket set?

#5

Post by Hal »

I think I'll try some OE Honda gaskets....I've just realised I've blown one on the rig.
"The Moving Finger writes, and having writ, moves on,
nor all your Piety nor Wit
can lure it back to cancel half a line...

so....probably best use Tipp-Ex in future?"

1977 GL1000 in bits
1978 SR 500 Yam
1995 Harley Sportster/Buell street-tracker
1992 Grinnall Scorpion SC3 prototype
2002 Caterham SV 220 Evo (4 wheeled motorcycle) :mrgreen:


Hal's Nalbum
jimbo
Zinc Member
Zinc Member
Posts: 45
Joined: Sat Oct 15, 2011 6:42 pm
Location: crofton,md

Re: Gasket set?

#6

Post by jimbo »

I’ve been putting a 1980 gl1100 together for 2 years and every time I get some after market o rings or seals they don’t fit or they start to leak, I would recommend to ask Randdak if he has them or who he recommends, stick with the pros
User avatar
Oldewing
Secretary
Secretary
Posts: 8177
Joined: Wed Jun 08, 2005 8:19 pm
Location: Gahanna Ohio

Re: Gasket set?

#7

Post by Oldewing »

10 years..............
82 GL1100 Interstate-Oldewing October 23 BOTM
06 GL1800 Road bike, as in Rode alot...
Sometimes I wrestle with my inner demons.........
Other times we just hug.......

Team 898
Team LTD 993
Team 76 R2B3
And always remember: beer has some food value--but food has NO beer value...
Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “Parts Reference Forum”