Timing belts

cross over parts from other wings, hondas, or any other parts sources that can be used on our wings.

Moderators: robin1731, RAT, Forum Moderators

UK_Andy
Titanium Member
Titanium Member
Posts: 404
Joined: Sat Aug 15, 2015 5:55 pm
Location: Surrey. UK

Timing belts

Post #1 by UK_Andy » Fri Oct 02, 2015 6:33 am

The part numbers for these belts are different in the UK

GL1000 & GL1100 (requires 2)
Honda part #14400-371-04/14400-371-14
Gates #T274
NAPA #250274
Goodyear Gatorback #40274 (AutoZone & others)

Can anyone say what car they are for and the I can get UK ones.

Or if I can dimensions and number of teeth i can find out as well

User avatar
ericheath
Honored Life Member
Honored Life Member
Posts: 8377
Joined: Wed Jul 29, 2009 11:20 am

Re: Timing belts

Post #2 by ericheath » Fri Oct 02, 2015 8:29 am

Honda Affinity is coming to mind, but I think that was for the 1200.
Whatever I suggest here should be given ample time for a moderator to delicately correct. I apologize in advance.
77 WING, 1200 engine with 77 heads, cams, gl1100 foot pegs, Magna V65 front end, 764A carbs, [-gone Suzuki M109 monoshock--, replaced with gl1100 shocks] gl 1200 swing arm, gl1500 final drive, wheel and rear brakes Valkyrie seat, Meanstreak tank, Sportster pipes, Power Arc ignition off crank.
77 Wing. black
83 Wing, in pieces
"Continuing education is important even if the subject matter is fairly useless (as in this case)."---Greg Foresi

UK_Andy
Titanium Member
Titanium Member
Posts: 404
Joined: Sat Aug 15, 2015 5:55 pm
Location: Surrey. UK

Re: Timing belts

Post #3 by UK_Andy » Mon Oct 05, 2015 8:23 am

Bump, anyone please have more info?

User avatar
roncar
Vice President
Vice President
Posts: 4877
Joined: Sat Jan 05, 2008 4:30 pm
My Album: http://www.ngwclub.com/gallery3/index.p ... s/roncarGL
Location: Lakeland, Florida

Re: Timing belts

Post #4 by roncar » Mon Oct 05, 2015 10:39 am

One of the numbers I've seen in the forums is the Gates 5119 (available only in Europe?) This link gives some other manufactures and part numbers (I'm not familiar with any of them.) http://boodmo.com/catalog/part-timing_belt-1448330/#
"I periodically misspell words just to annoy the word police."

Image

User avatar
CYBORG
Moderator
Moderator
Posts: 21623
Joined: Mon Jan 14, 2008 12:52 pm
Location: Muskegon mich

Re: Timing belts

Post #5 by CYBORG » Mon Oct 05, 2015 11:18 am

I have to wonder why the European number would be different for the same part
1978 custom GL1000
1977 custom with 1200 engine
1985 gl1200

UK_Andy
Titanium Member
Titanium Member
Posts: 404
Joined: Sat Aug 15, 2015 5:55 pm
Location: Surrey. UK

Re: Timing belts

Post #6 by UK_Andy » Tue Oct 06, 2015 8:34 am

Thanks, if someone can just confirm 87 teeth and 19mm wide I may be able to add some info to the crossover list.


Return to “Parts Reference Forum”

Who is online

Users browsing this forum: No registered users and 1 guest