CROSS OVER PARTS LIST

cross over parts from other wings, hondas, or any other parts sources that can be used on our wings.

Moderators: robin1731, RAT, Forum Moderators

User avatar
Toehead
True Blue Steel Biker
True Blue Steel Biker
Posts: 2102
Joined: Fri Jul 15, 2011 3:10 pm
Location: Mendon, MA

Re: CROSS OVER PARTS LIST

Post #106 by Toehead » Wed Aug 07, 2013 1:06 pm

Crank seal, GL1000 and GL1100:

Timken P/N 223542
National P/N 223542

Used as a : 1993 infinity J30 rear differential seal

The Timken is easier to install, as it is tapered so it self centers. The national is not tapered. The Timken is cheaper as well.

About 7$ at autozone/advanced auto/etc
2012 Golf TDI, fast and frugal oil burner
1980 CX500C, All around road warrior (Sold)
1975 TS125 (Sold), old smoker
1977 naked GL1000, Highway cruiser
'81 GL1100 14,000 (reconditioned and sold)
'81 GL1100 50,000 miles (under construction)
2X 1981 CM400 beginner bike (sold)
1980 CB750C (sold)
1994 Virago 750 (Wifey's bike)
'76 GL1000 Sulphur Yellow (Megasquirted efi build) http://www.ngwclub.com/forum/viewtopic.php?f=47&t=59774

User avatar
Roady
Member Relations &_Graphics
Member Relations &_Graphics
Posts: 11875
Joined: Wed Jun 20, 2007 2:35 pm
Location: Belleville, IL

Re: CROSS OVER PARTS LIST

Post #107 by Roady » Thu Aug 08, 2013 8:53 am

Thanks Toehead. It's been added to the list.

Nohands
Cast Iron Member
Cast Iron Member
Posts: 70
Joined: Mon Aug 12, 2013 7:06 am
Location: 48190

Re: CROSS OVER PARTS LIST

Post #108 by Nohands » Thu Oct 24, 2013 2:58 pm

I found this list of stearing head bearing sizes and X-over front end referance.

http://scandalon.com/2009/06/motorcycle ... ize-chart/
Eric Knight

2006 GL1800
1985 GL1200A Work in progress (first attempt at anything mechanical)

User avatar
82aspy
True Blue Steel Biker
True Blue Steel Biker
Posts: 2279
Joined: Sun Jul 01, 2012 8:12 pm
Location: canuck

Re: CROSS OVER PARTS LIST

Post #109 by 82aspy » Thu Oct 24, 2013 3:43 pm

BIG T wrote:this sticky is to list tried and true cross over parts. like parts from other Hondas and other sources that will cross over to our gl bikes. even if it is a year crossover, you can list it here. I know that Frenchy and Randak probably have a partial list they themselves use. lets build this one....T :?: :?: :?: :?: :?:

does this list include suitable parts that require a slight mod?

like here Adapting Rear Master Cylinder from GL1800 to GL1100
"there is a Darwinian element"
Yoda said, "There is no try or not try; there is only do or don't do."
=====================
ngw quotes anim-cheers1 - \ "I will strip the beast" \ "the swingarm is just a hunk of metal" \ "gonna maybe ...dunno yet" \ "It's never done, thats the fun." \ "something about this site brings me back"

User avatar
robin1731
Membership Admin
Membership Admin
Posts: 19238
Joined: Mon May 29, 2006 8:31 am
Location: Decatur, Indiana

Re: CROSS OVER PARTS LIST

Post #110 by robin1731 » Thu Oct 24, 2013 4:46 pm

82aspy wrote:
BIG T wrote:this sticky is to list tried and true cross over parts. like parts from other Hondas and other sources that will cross over to our gl bikes. even if it is a year crossover, you can list it here. I know that Frenchy and Randak probably have a partial list they themselves use. lets build this one....T :?: :?: :?: :?: :?:

does this list include suitable parts that require a slight mod?

like here Adapting Rear Master Cylinder from GL1800 to GL1100



This is really a list of bolt on cross over parts. Like for car parts that are a direct fit. If it needs modifying to fit it isn't a crossover. It's usable. IMO
1975 GL1000 parts bike (parts for sale)
1976 Goldwing Super Sport
1985 Honda Elite
1976 KZ900 Dragbike
1992 ZX7 Dragbike (KZ900 style motor w/NOS)
and a rotation of various purchases
Randakk approved Carb Rebuilder

User avatar
Roady
Member Relations &_Graphics
Member Relations &_Graphics
Posts: 11875
Joined: Wed Jun 20, 2007 2:35 pm
Location: Belleville, IL

Re: CROSS OVER PARTS LIST

Post #111 by Roady » Fri Oct 25, 2013 6:26 am

Nohands wrote:I found this list of stearing head bearing sizes and X-over front end referance.

http://scandalon.com/2009/06/motorcycle ... ize-chart/

These are the ones from that list that apply to GL's.

Upper: 26 x 48.5 x 15.2
Lower: 30 x 50 x 14.4

Honda GL1000 (75-76)
Honda GL1000L* (76)

Upper: 25 x 47 x 15
Lower: 30 x 55 x 17

Honda GL1000 (77-79)

Upper: 26 x 47 x 15
Lower: 30 x 55 x 17

Honda GL1100 (80-83), GL1100C/AC/DC/IC*, GL1100D2D/AD/A/IA/DA*, GL1100RB/RC/D/ID/DD*
Honda GL1200 (84-87)
Honda GL1500 (88-91)
Honda GL1500 AP-AR (93-94)

* - Do you know what these suffixes mean?

robin1731 wrote:
82aspy wrote:does this list include suitable parts that require a slight mod?

like here Adapting Rear Master Cylinder from GL1800 to GL1100

This is really a list of bolt on cross over parts. Like for car parts that are a direct fit. If it needs modifying to fit it isn't a crossover. It's usable. IMO

I agree with Robin. But, that one is worth saving so I've moved it to this Parts Reference forum.

User avatar
82aspy
True Blue Steel Biker
True Blue Steel Biker
Posts: 2279
Joined: Sun Jul 01, 2012 8:12 pm
Location: canuck

Re: CROSS OVER PARTS LIST

Post #112 by 82aspy » Fri Oct 25, 2013 6:55 am

i'm not familiar with the parts reference forum but suggest making it clear the rear m/c mod is untested for the 83 gl1100 linked setup, at least the way i'm reading the thread,

however, prob wouldn't be hard to find a closer matched m/c, as far as piston size goes, with the same mod

if required for the 83 linked brakes

Roady wrote:
robin1731 wrote:
82aspy wrote:does this list include suitable parts that require a slight mod?

like here Adapting Rear Master Cylinder from GL1800 to GL1100

This is really a list of bolt on cross over parts. Like for car parts that are a direct fit. If it needs modifying to fit it isn't a crossover. It's usable. IMO

I agree with Robin. But, that one is worth saving so I've moved it to this Parts Reference forum.
"there is a Darwinian element"
Yoda said, "There is no try or not try; there is only do or don't do."
=====================
ngw quotes anim-cheers1 - \ "I will strip the beast" \ "the swingarm is just a hunk of metal" \ "gonna maybe ...dunno yet" \ "It's never done, thats the fun." \ "something about this site brings me back"

User avatar
Roady
Member Relations &_Graphics
Member Relations &_Graphics
Posts: 11875
Joined: Wed Jun 20, 2007 2:35 pm
Location: Belleville, IL

Re: CROSS OVER PARTS LIST

Post #113 by Roady » Fri Oct 25, 2013 7:24 am

82aspy wrote:i'm not familiar with the parts reference forum ...

It's just a "branch" off the Technical forums "tree" .... here. Take a look at the Board Index.

(Note to self: A drawing of the whole tree would be helpful ... someday. :orange )

SJBikesaws
Cast Iron Member
Cast Iron Member
Posts: 58
Joined: Thu Nov 10, 2011 6:33 pm
Location: NM

Re: CROSS OVER PARTS LIST

Post #114 by SJBikesaws » Wed Nov 06, 2013 4:24 pm

Large O ring for oil filter housing on GL1100 GL1000 and GL1200

Napa Balkamp # 727-2340

Dumped the oil for a quicky change on Friday, and the 0 ring on my filter housing was in pretty bad shape. Napa had this one on the shelf and it fit perfectly, so I got to ride,,,YAY!!!!

Yea, I know, buy a new filter, but I didn't have one and had a few miles built up on the oil. The stealership didn't have a filter in stock.
Sean



Gotta 81 GL1100 Rat rod, not what Honda meant to build, but what I have always wanted.

User avatar
Roady
Member Relations &_Graphics
Member Relations &_Graphics
Posts: 11875
Joined: Wed Jun 20, 2007 2:35 pm
Location: Belleville, IL

Re: CROSS OVER PARTS LIST

Post #115 by Roady » Thu Nov 07, 2013 7:36 am

NAPA usually stocks filters.

User avatar
CYBORG
Moderator
Moderator
Posts: 20983
Joined: Mon Jan 14, 2008 12:52 pm
Location: Muskegon mich

Re: CROSS OVER PARTS LIST

Post #116 by CYBORG » Thu Nov 07, 2013 8:30 am

Autozone and advance auto usually have them as well
1978 custom GL1000
1977 custom with 1200 engine
1985 gl1200

User avatar
robin1731
Membership Admin
Membership Admin
Posts: 19238
Joined: Mon May 29, 2006 8:31 am
Location: Decatur, Indiana

Re: CROSS OVER PARTS LIST

Post #117 by robin1731 » Thu Nov 07, 2013 10:46 am

And Oreilly's.
1975 GL1000 parts bike (parts for sale)
1976 Goldwing Super Sport
1985 Honda Elite
1976 KZ900 Dragbike
1992 ZX7 Dragbike (KZ900 style motor w/NOS)
and a rotation of various purchases
Randakk approved Carb Rebuilder

User avatar
Roady
Member Relations &_Graphics
Member Relations &_Graphics
Posts: 11875
Joined: Wed Jun 20, 2007 2:35 pm
Location: Belleville, IL

Re: CROSS OVER PARTS LIST

Post #118 by Roady » Fri Nov 08, 2013 8:05 am

Et cetera, et cetera, et cetera.
Image

Oil Filter - GL1000, GL1100 & GL1200
    Honda Part #15410-426-010, 15410-422-004
    AMSOil SMF-101
    FRAM #CH6009 (comes with both o-rings)
    K&N KN401
    Napa #PS4940
    Purolator #ML16809
    STP SMO-09
    WIX #24940

User avatar
taylorsel
Silver Member
Silver Member
Posts: 655
Joined: Mon Jun 29, 2009 7:44 am
Location: Winchester, VA

Re: CROSS OVER PARTS LIST

Post #119 by taylorsel » Fri Nov 08, 2013 2:08 pm

We are a bunch of old guys if we got that reference :-D
STEVE LOGAN, 1979 GOLDWING, 1978 GOLDWING, 1976 GOLDWING

OfcZ
Cast Iron Member
Cast Iron Member
Posts: 62
Joined: Thu Nov 21, 2013 11:12 pm
Location: Arnold, MO

Re: CROSS OVER PARTS LIST

Post #120 by OfcZ » Tue Nov 26, 2013 8:40 pm

Does anyone know if any other years would fit an 83 GL I 1100 for the lower fairing cowls?
-Brett Z-
92 Shadow 1100C "Elvira" Sold
83 GL1100 Interstate Full Dress


Return to “Parts Reference Forum”

Who is online

Users browsing this forum: No registered users and 1 guest