cx drive shaft
Moderators: CYBORG, Oldewing, robin1731, Forum Moderators
- duke182
- SUPER BIKER!!!!
- Posts: 3375
- Joined: Mon Jul 05, 2010 11:33 pm
- My Album: http://ngwclub.com/gallery/v/wingmans/duke182/
- Location: hope,ark
Re: cx drive shaft
Very nice bike.
God bless those who protect our freedom, at every level
Knees in the breeze makes miles of smiles
"Strive for progress, not perfection"-a wise man
1984 1200 standard
click pic to see my gallery
vote in my poll
Knees in the breeze makes miles of smiles
"Strive for progress, not perfection"-a wise man
1984 1200 standard
click pic to see my gallery
vote in my poll
-
- Rusty Probie
- Posts: 2
- Joined: Wed Aug 16, 2017 6:08 pm
Re: cx drive shaft
who was the guy you sent this off to get modified? would you share?
puffy75 wrote:IMG_1952.JPG
Ok I know it has been awhile but it had a long way to go back and forth. The modified piece is below the left over pieces above from the two shafts. The longer forward portion is from the CX500 and the longer rear portion is from the GL500. Needed to fit the GL Pro Link rear swing arm to the CX along with other mods. IE: The pivot bearings are a different size and need modification, the mount for the single shock (I decided on duals) and the mounts for lower Pro Arm link. Still has to be road tested
- Sagebrush
- Run Executive
- Posts: 6465
- Joined: Wed Aug 15, 2007 10:35 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/album269/
- Location: Raleigh, NC
Re: cx drive shaft
This is a pretty old thread and you may not get an answer as I haven't seen puffy75 post on this board for a long time.
Dean Spalding
Raleigh, NC
"Two things are infinite: the universe and human stupidity; and I'm not sure about the universe." - Albert Einstein
'82 Yellow GL1100
'81 Blue GL1100
My Gallery
My 1100 Build Thread
Raleigh, NC
"Two things are infinite: the universe and human stupidity; and I'm not sure about the universe." - Albert Einstein
'82 Yellow GL1100
'81 Blue GL1100
My Gallery
My 1100 Build Thread
-
- Rusty Probie
- Posts: 2
- Joined: Wed Aug 16, 2017 6:08 pm
Re: cx drive shaft
Hey thanks for letting me know he hasn't been around. I will try reaching him by e-mail. Here is what I am working on. Trying to get the drive shaft made. Swing arm in the back with a bearing supported shaft between the motor and the swing arm.
- scootsx2
- True Blue Steel Biker
- Posts: 2485
- Joined: Mon Jun 07, 2010 12:52 pm
- Location: St. Louis, Missouri USA
Re: cx drive shaft
Nice project. You might also try over on the CX500 forum.dbanta wrote:Hey thanks for letting me know he hasn't been around. I will try reaching him by e-mail. Here is what I am working on. Trying to get the drive shaft made. Swing arm in the back with a bearing supported shaft between the motor and the swing arm.
1975 GL1000 Sidecar Outfit
1982 CX500-based Trident ex-Police Trike
2001 GL1800 MotorTrike
2006 Vespa LX150
1956 Francis-Barnett Falcon 74
195x Solex 1700
196x Solex 2200
St. Louis, MO
The dude abides.
Brothers of the Third Wheel - Gateway Chapter http://www.btw-trikers.org
Vintage Japanese Motorcycle Club http://www.vjmc.org
Francis-Barnett Owners Club http://www.francis-barnett.co.uk/
Antique Motorcycle Club of America http://www.antiquemotorcycle.org/
Vintage Motor Cycle Club http://www.vmcc.net
British Motorcycle Charitable Trust http://www.bmct.org/
VeloSolex Club UK http://www.velosolexclubuk.com/
1982 CX500-based Trident ex-Police Trike
2001 GL1800 MotorTrike
2006 Vespa LX150
1956 Francis-Barnett Falcon 74
195x Solex 1700
196x Solex 2200
St. Louis, MO
The dude abides.
Brothers of the Third Wheel - Gateway Chapter http://www.btw-trikers.org
Vintage Japanese Motorcycle Club http://www.vjmc.org
Francis-Barnett Owners Club http://www.francis-barnett.co.uk/
Antique Motorcycle Club of America http://www.antiquemotorcycle.org/
Vintage Motor Cycle Club http://www.vmcc.net
British Motorcycle Charitable Trust http://www.bmct.org/
VeloSolex Club UK http://www.velosolexclubuk.com/
-
- Similar Topics
- Replies
- Views
- Last post
-
- 5 Replies
- 580 Views
-
Last post by handyandy64
-
- 3 Replies
- 357 Views
-
Last post by flyin900
-
- 3 Replies
- 328 Views
-
Last post by phillip0123
-
- 20 Replies
- 681 Views
-
Last post by Old Fogey