Pauls GL 1000 Project
Moderators: Brant, Sagebrush, Forum Moderators
- Cookie
- Honored Life Member
- Posts: 15821
- Joined: Thu Oct 25, 2007 11:37 pm
- RIP: 1950-2011
- Location: San Mateo, CA
Do you guys use water or lube with the steel wool? I've also ripped off a few of the half sponge, half fine scotchbrite things my wife has and they work pretty good in some places. I have heard Scotchbrite can scratch chrome though.
Enjoy life,
Cookie
A guy with two sidecars can't be all bad.
Owner of 4.4 76s and one lone 75 Wings (does a spare engine make .2?)
Cookie
A guy with two sidecars can't be all bad.
Owner of 4.4 76s and one lone 75 Wings (does a spare engine make .2?)
- paultjack
- Silver Member
- Posts: 897
- Joined: Sat Sep 06, 2008 11:39 am
- Location: Woodsboro, MD
The scotch-brite sponges are great for pieces you don't mind getting scratched. but they do clean really well! Most of the time I use some sort of cleaner like dish soap and water to clean without scratching.
One thing about using steel wool... If you don't wear gloves you'll get steel pices in your fingers. Almost every time I use it without gloves I'm picking wool out of my hands!
One thing about using steel wool... If you don't wear gloves you'll get steel pices in your fingers. Almost every time I use it without gloves I'm picking wool out of my hands!
Do you know what it's like to fall in the mud and get kicked, in the head, by an iron boot? Of course you don't--no one does--that never happens. - Capt. Rex Kramer
'78 Honda GL1000 GoldWing
'86 Honda CMX450C Rebel
'78 Honda GL1000 GoldWing
'86 Honda CMX450C Rebel
- Cookie
- Honored Life Member
- Posts: 15821
- Joined: Thu Oct 25, 2007 11:37 pm
- RIP: 1950-2011
- Location: San Mateo, CA
- sunnbobb
- Facebook Admin
- Posts: 21272
- Joined: Thu Jan 10, 2008 4:09 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/sunnbobb/
- Location: LaConner, WA
Key to an awesome clearcoat:
1. after each coat, clear or otherwise, sand with 1000 grit wet/dry paper using lots of soapy water
2. after final 1000 grit sand, sand final clear coat with 2000 using soapy water
3. buff with Meguires fine cut cleaner
4. buff with Meguires Grazing
5. Wax
1. after each coat, clear or otherwise, sand with 1000 grit wet/dry paper using lots of soapy water
2. after final 1000 grit sand, sand final clear coat with 2000 using soapy water
3. buff with Meguires fine cut cleaner
4. buff with Meguires Grazing
5. Wax
I found the end of the internet
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
- paultjack
- Silver Member
- Posts: 897
- Joined: Sat Sep 06, 2008 11:39 am
- Location: Woodsboro, MD
Thanks Sunnbobb for those tips! I started sanding the right side cover last night. Found two spots (edges) where the paint was a tad thin. So, some more touch-up there, but I was expecting that. The rest of the cover is looking pretty good though.
I read before to use soapy water when sanding. Is there a reason for that? Lubrication? I was using just plain water but will switch to soapy water.
When you buff, are you using a power buffer? I have an orbital at the moment but from what I've been reading there's no comparison to the shine you can get with the power buffer. So, I probably will have to upgrade.
And for the Meguires products, are those available at most auto parts stores?
I read before to use soapy water when sanding. Is there a reason for that? Lubrication? I was using just plain water but will switch to soapy water.
When you buff, are you using a power buffer? I have an orbital at the moment but from what I've been reading there's no comparison to the shine you can get with the power buffer. So, I probably will have to upgrade.
And for the Meguires products, are those available at most auto parts stores?
Do you know what it's like to fall in the mud and get kicked, in the head, by an iron boot? Of course you don't--no one does--that never happens. - Capt. Rex Kramer
'78 Honda GL1000 GoldWing
'86 Honda CMX450C Rebel
'78 Honda GL1000 GoldWing
'86 Honda CMX450C Rebel
- JBz
- SUPER BIKER!!!!
- Posts: 3070
- Joined: Wed Jan 31, 2007 8:11 pm
- Location: dayton nv
. i always use the steel wool dry. JBCookie wrote:Do you guys use water or lube with the steel wool? I've also ripped off a few of the half sponge, half fine scotchbrite things my wife has and they work pretty good in some places. I have heard Scotchbrite can scratch chrome though.
jbz........... Thinkin about sh-t too hard and You wont get anything done
- paultjack
- Silver Member
- Posts: 897
- Joined: Sat Sep 06, 2008 11:39 am
- Location: Woodsboro, MD
MY FRAME IS COMING HOME!!! Got the call that my frame will be delivered to my home tonight! AWESOME! Oh wait, I don't have the engine ready to go in it!!! Hmmm, this is going to require me to speed up my progress! AWESOME! I'm going to speed up my progress! This is the start of the final week of this month and I've got tons to do before the bike American Legion rally next month! If I don't get a move on it I'll be riding my Rebel!
COME ON WARM WEATHER!!! I'm tired of below freezing mornings!
I'm not the pheasant plucker
I'm the pheasant plucker's mate,
I'm only plucking pheasants
'Cause the pheasant plucker's late!
COME ON WARM WEATHER!!! I'm tired of below freezing mornings!
I'm not the pheasant plucker
I'm the pheasant plucker's mate,
I'm only plucking pheasants
'Cause the pheasant plucker's late!
Do you know what it's like to fall in the mud and get kicked, in the head, by an iron boot? Of course you don't--no one does--that never happens. - Capt. Rex Kramer
'78 Honda GL1000 GoldWing
'86 Honda CMX450C Rebel
'78 Honda GL1000 GoldWing
'86 Honda CMX450C Rebel
- Cookie
- Honored Life Member
- Posts: 15821
- Joined: Thu Oct 25, 2007 11:37 pm
- RIP: 1950-2011
- Location: San Mateo, CA
- Track T 2411
- Honored Life Member
- Posts: 8482
- Joined: Thu May 29, 2008 9:37 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
- Location: Prairie du Sac Wisconsin
Whew! Don't want to screw up your 'pl's and 'ph's on that little ditty!
Todd
Todd
"I have no special talent. I am only passionately curious." - Albert Einstein
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
- scpumm
- Lead Member
- Posts: 6
- Joined: Mon Nov 10, 2008 11:54 am
- Location: Lake Linden, MI.
Patience and elbow grease, etc..
Nice polishing work, paultjack! Just goes to show that perseverance and
polish can do wonders. I have rescued alloy parts deemed as scrap by
others also. That frame looks scary. Just points out that one should do a
thorough check of the frame underside and other weld points. Especially on a new (used) purchase. Will follow your progress. Good luck. Steve
polish can do wonders. I have rescued alloy parts deemed as scrap by
others also. That frame looks scary. Just points out that one should do a
thorough check of the frame underside and other weld points. Especially on a new (used) purchase. Will follow your progress. Good luck. Steve
1979 GL1000, 1975 Triumph T160, 1967 BSA 441 Roadster
- sunnbobb
- Facebook Admin
- Posts: 21272
- Joined: Thu Jan 10, 2008 4:09 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/sunnbobb/
- Location: LaConner, WA
Howdy, the soapy water makes the sandpaper glide over the finish. continuously dip the paper in your water to clean the grit. I also forgot to mention to use a soft sanding block and painters squeegee. after each sanding, wipe the part with the squeegee to find where the low and high spots are. Do not use your fingers behind the paper, you will come out with a wavy finish.
The mcguires products are available at almost every auto store i have seen.
I use a flat wool - re-washable 6" polishing bonnet on a hand held rotary buffer. Got it at Montgomery wards years ago. Harbor Freight has them Careful not to buff too soon after curing the clearcoat.
Lastly, any part you clean with steel wool should be washed with soap and water if you are going to paint it. Steel wool typically has a fine oil on it to keep it from rusting. Paint will not stick where the oil is deposited. My experience is that scotch brite scratches chrome.
The mcguires products are available at almost every auto store i have seen.
I use a flat wool - re-washable 6" polishing bonnet on a hand held rotary buffer. Got it at Montgomery wards years ago. Harbor Freight has them Careful not to buff too soon after curing the clearcoat.
Lastly, any part you clean with steel wool should be washed with soap and water if you are going to paint it. Steel wool typically has a fine oil on it to keep it from rusting. Paint will not stick where the oil is deposited. My experience is that scotch brite scratches chrome.
I found the end of the internet
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
- Cookie
- Honored Life Member
- Posts: 15821
- Joined: Thu Oct 25, 2007 11:37 pm
- RIP: 1950-2011
- Location: San Mateo, CA
Somebody, I think maybe Sidecar Bob, posted some information on Scotchbrite a while back. It seems the grit on that stuff is pretty hard and scratching chrome is pretty easy to do.
Enjoy life,
Cookie
A guy with two sidecars can't be all bad.
Owner of 4.4 76s and one lone 75 Wings (does a spare engine make .2?)
Cookie
A guy with two sidecars can't be all bad.
Owner of 4.4 76s and one lone 75 Wings (does a spare engine make .2?)
-
- Similar Topics
- Replies
- Views
- Last post