MAKING A TRIKE
Moderators: Brant, Sagebrush, Forum Moderators
- transitman
- Titanium Member
- Posts: 495
- Joined: Sun Jul 22, 2012 12:08 am
- Location: UK
Re: MAKING A TRIKE
Answered my own question by reading the intros!
"Say not the struggle naught availeth." A H Clough.
'78 GL1000 Trike
1st bike: '58 150cc Ambassador 2 stroke. learned how to chuck it down the road
'31 BSA 500 single long stroke Sloper, dug out of a wall in Sussex, never went that well...
'49 Sunbeam S8, built from bits in '67, used daily, sold to a US biker in '84, still miss it
3 BSA Bantams, now a daughter has one
'78 Honda 500T
'78 GL1000 Trike
1st bike: '58 150cc Ambassador 2 stroke. learned how to chuck it down the road
'31 BSA 500 single long stroke Sloper, dug out of a wall in Sussex, never went that well...
'49 Sunbeam S8, built from bits in '67, used daily, sold to a US biker in '84, still miss it
3 BSA Bantams, now a daughter has one
'78 Honda 500T
-
- Lead Member
- Posts: 6
- Joined: Sun Jun 18, 2017 10:58 am
Re: MAKING A TRIKE
I am from Arkansas in the US. Currently have an 82 interstate and an 83 aspencade that are both barn finds. I have got the 82 running but it has been butchered and abused in its past so I think I will put the motor on the 83 since that motor was left in the weather for years with no carbs on it. It should be a good time.
- transitman
- Titanium Member
- Posts: 495
- Joined: Sun Jul 22, 2012 12:08 am
- Location: UK
Re: MAKING A TRIKE
Post us some pics, your rebuild will be good to see
"Say not the struggle naught availeth." A H Clough.
'78 GL1000 Trike
1st bike: '58 150cc Ambassador 2 stroke. learned how to chuck it down the road
'31 BSA 500 single long stroke Sloper, dug out of a wall in Sussex, never went that well...
'49 Sunbeam S8, built from bits in '67, used daily, sold to a US biker in '84, still miss it
3 BSA Bantams, now a daughter has one
'78 Honda 500T
'78 GL1000 Trike
1st bike: '58 150cc Ambassador 2 stroke. learned how to chuck it down the road
'31 BSA 500 single long stroke Sloper, dug out of a wall in Sussex, never went that well...
'49 Sunbeam S8, built from bits in '67, used daily, sold to a US biker in '84, still miss it
3 BSA Bantams, now a daughter has one
'78 Honda 500T
- transitman
- Titanium Member
- Posts: 495
- Joined: Sun Jul 22, 2012 12:08 am
- Location: UK
Re: MAKING A TRIKE
Not a pretty sight, not helped by having added a pile of wires to split the headlights horn and indicators and extra stuff like the starter switch and voltmeter.
I shall have to find a way of stuffing it out of sight somehow.
and not any prettier seen from here. But most of it seems to work, so far. Still got the fuel gauge to fit.
Which seems too big for its hole, but there was nothing else there when I pulled it apart.
So I have cut out a rubber sheet to fill the gap.
I don't have the right parts manual for this model so this spring and the gauge fitting itself aren't shown, but it looks fairly straightforward to reassemble.
Fuel line next.
"Say not the struggle naught availeth." A H Clough.
'78 GL1000 Trike
1st bike: '58 150cc Ambassador 2 stroke. learned how to chuck it down the road
'31 BSA 500 single long stroke Sloper, dug out of a wall in Sussex, never went that well...
'49 Sunbeam S8, built from bits in '67, used daily, sold to a US biker in '84, still miss it
3 BSA Bantams, now a daughter has one
'78 Honda 500T
'78 GL1000 Trike
1st bike: '58 150cc Ambassador 2 stroke. learned how to chuck it down the road
'31 BSA 500 single long stroke Sloper, dug out of a wall in Sussex, never went that well...
'49 Sunbeam S8, built from bits in '67, used daily, sold to a US biker in '84, still miss it
3 BSA Bantams, now a daughter has one
'78 Honda 500T
- 5speed
- Honored Life Member
- Posts: 5315
- Joined: Sat Jul 11, 2015 2:37 pm
- Location: Nova Scotia Canada
Re: MAKING A TRIKE
is it possible the trim piece that was around the gauge made up the difference between the hole and gauge?
1982 1100 standard. (sold)
1986 Yamaha FJ1200
2000 Yamaha Roadstar
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
2019 Can-Am ryker (boss's new ride)
2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
1986 Yamaha FJ1200
2000 Yamaha Roadstar
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
2019 Can-Am ryker (boss's new ride)
2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
- transitman
- Titanium Member
- Posts: 495
- Joined: Sun Jul 22, 2012 12:08 am
- Location: UK
Re: MAKING A TRIKE
More than likely!
Don't know how to identify it without a part ref, my copy shows a different assembly
Don't know how to identify it without a part ref, my copy shows a different assembly
"Say not the struggle naught availeth." A H Clough.
'78 GL1000 Trike
1st bike: '58 150cc Ambassador 2 stroke. learned how to chuck it down the road
'31 BSA 500 single long stroke Sloper, dug out of a wall in Sussex, never went that well...
'49 Sunbeam S8, built from bits in '67, used daily, sold to a US biker in '84, still miss it
3 BSA Bantams, now a daughter has one
'78 Honda 500T
'78 GL1000 Trike
1st bike: '58 150cc Ambassador 2 stroke. learned how to chuck it down the road
'31 BSA 500 single long stroke Sloper, dug out of a wall in Sussex, never went that well...
'49 Sunbeam S8, built from bits in '67, used daily, sold to a US biker in '84, still miss it
3 BSA Bantams, now a daughter has one
'78 Honda 500T
- 5speed
- Honored Life Member
- Posts: 5315
- Joined: Sat Jul 11, 2015 2:37 pm
- Location: Nova Scotia Canada
Re: MAKING A TRIKE
• 31305-311-006 RUBBER. FUEL METER GUIDE
this is the # for the rubber gasket that goes around the gauge. I got it from the parts manual for GL1000's.
this is the # for the rubber gasket that goes around the gauge. I got it from the parts manual for GL1000's.
1982 1100 standard. (sold)
1986 Yamaha FJ1200
2000 Yamaha Roadstar
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
2019 Can-Am ryker (boss's new ride)
2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
1986 Yamaha FJ1200
2000 Yamaha Roadstar
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
2019 Can-Am ryker (boss's new ride)
2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
- transitman
- Titanium Member
- Posts: 495
- Joined: Sun Jul 22, 2012 12:08 am
- Location: UK
Re: MAKING A TRIKE
Thank you. I obviously have the wrong GL1000 parts book
"Say not the struggle naught availeth." A H Clough.
'78 GL1000 Trike
1st bike: '58 150cc Ambassador 2 stroke. learned how to chuck it down the road
'31 BSA 500 single long stroke Sloper, dug out of a wall in Sussex, never went that well...
'49 Sunbeam S8, built from bits in '67, used daily, sold to a US biker in '84, still miss it
3 BSA Bantams, now a daughter has one
'78 Honda 500T
'78 GL1000 Trike
1st bike: '58 150cc Ambassador 2 stroke. learned how to chuck it down the road
'31 BSA 500 single long stroke Sloper, dug out of a wall in Sussex, never went that well...
'49 Sunbeam S8, built from bits in '67, used daily, sold to a US biker in '84, still miss it
3 BSA Bantams, now a daughter has one
'78 Honda 500T
- 5speed
- Honored Life Member
- Posts: 5315
- Joined: Sat Jul 11, 2015 2:37 pm
- Location: Nova Scotia Canada
Re: MAKING A TRIKE
PM sent.
1982 1100 standard. (sold)
1986 Yamaha FJ1200
2000 Yamaha Roadstar
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
2019 Can-Am ryker (boss's new ride)
2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
1986 Yamaha FJ1200
2000 Yamaha Roadstar
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
2019 Can-Am ryker (boss's new ride)
2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
- transitman
- Titanium Member
- Posts: 495
- Joined: Sun Jul 22, 2012 12:08 am
- Location: UK
Re: MAKING A TRIKE
FUEL LINE
Looking forward from the back:
Stripey gold thing at top is the tank, red wheel the on/off tap, fuel line standard stuff, runs forward. Stainless pipe clamps.
Running forward to the inline filter. Where your fuel tank sits is my battery box. I will strap the fuel line to the frame.
Closer look; I will probably shorten the lower fuel line a few inches.
The engine paintwork has taken a beating over the last 6 years.
Looking forward from the back:
Stripey gold thing at top is the tank, red wheel the on/off tap, fuel line standard stuff, runs forward. Stainless pipe clamps.
Running forward to the inline filter. Where your fuel tank sits is my battery box. I will strap the fuel line to the frame.
Closer look; I will probably shorten the lower fuel line a few inches.
The engine paintwork has taken a beating over the last 6 years.
"Say not the struggle naught availeth." A H Clough.
'78 GL1000 Trike
1st bike: '58 150cc Ambassador 2 stroke. learned how to chuck it down the road
'31 BSA 500 single long stroke Sloper, dug out of a wall in Sussex, never went that well...
'49 Sunbeam S8, built from bits in '67, used daily, sold to a US biker in '84, still miss it
3 BSA Bantams, now a daughter has one
'78 Honda 500T
'78 GL1000 Trike
1st bike: '58 150cc Ambassador 2 stroke. learned how to chuck it down the road
'31 BSA 500 single long stroke Sloper, dug out of a wall in Sussex, never went that well...
'49 Sunbeam S8, built from bits in '67, used daily, sold to a US biker in '84, still miss it
3 BSA Bantams, now a daughter has one
'78 Honda 500T
- CYBORG
- Moderator
- Posts: 24552
- Joined: Mon Jan 14, 2008 12:52 pm
- Location: Muskegon mich
Re: MAKING A TRIKE
Nice work......time to ride
1978 custom GL1000
1977 custom with 1200 engine
1985 gl1200
1977 custom with 1200 engine
1985 gl1200
- gltriker
- Honored Life Member
- Posts: 5063
- Joined: Fri Sep 24, 2010 9:11 pm
- Location: central NY State
Re: MAKING A TRIKE
Cliff (74yrs )
Keep your eyes and ears open and you'll learn something new, everyday.
New users please visit our "Shop Talk" for common tips and help: <---jdvorchak
http://www.ngwclub.com/forum/page/ST
^^^^^^^click up here^^^^^
RE: a thorough fuel tank cleaning
"And your carbs will thank you. They no longer live down stream from a sewage plant." -gregforesi
"Can't see the paint when your looking thru the handlebars..........." -Oldewing
"I'd rather Ride than Shine" -RAT Me Too!!
Cliff
'75 GL1000 home built trike; http://www.ngwclub.com/forum/viewtopic.php?f=30&t=39996
October,2017 BOTM https://nakedgoldwingsclub.com/forum/page/Welcome
previous rides:
1953 H-D Servi-car, naked, 1969-1978 (serial#53G1559 committed to memory!)
1980 CB900 Custom (triked) 1997-2003 .... R.I.P.
Keep your eyes and ears open and you'll learn something new, everyday.
New users please visit our "Shop Talk" for common tips and help: <---jdvorchak
http://www.ngwclub.com/forum/page/ST
^^^^^^^click up here^^^^^
RE: a thorough fuel tank cleaning
"And your carbs will thank you. They no longer live down stream from a sewage plant." -gregforesi
"Can't see the paint when your looking thru the handlebars..........." -Oldewing
"I'd rather Ride than Shine" -RAT Me Too!!
Cliff
'75 GL1000 home built trike; http://www.ngwclub.com/forum/viewtopic.php?f=30&t=39996
October,2017 BOTM https://nakedgoldwingsclub.com/forum/page/Welcome
previous rides:
1953 H-D Servi-car, naked, 1969-1978 (serial#53G1559 committed to memory!)
1980 CB900 Custom (triked) 1997-2003 .... R.I.P.
- transitman
- Titanium Member
- Posts: 495
- Joined: Sun Jul 22, 2012 12:08 am
- Location: UK
Re: MAKING A TRIKE
A nice winters job sitting by the Aga, although I had to brave the cold to turn down a piece of rough old 3x10.
Cavity cut for seating the Rev counter assembly.
It is held together by a thin, spun collar that I prised open to dismantle it. I carefully dressed the collar using a drift to get it back into shape so it fitted into the recess in the wood.
Because of age, arthritis and probably too much whiskey, I have to improvise to hold things tightly. Thus this whole assembly.
This pic, ignoring the coke and Economist, shows the underside with the instrument housing pulled down tight using the 2x4mm threaded holes.
The top is secured by 2 bent straps. All this pushes it together with some force and the next step is to figure out a way to fold the lip of the collar back over the glazed cover. Needless to say I would rather not attempt this with a hammer.
To be continued, I hope.
Cavity cut for seating the Rev counter assembly.
It is held together by a thin, spun collar that I prised open to dismantle it. I carefully dressed the collar using a drift to get it back into shape so it fitted into the recess in the wood.
Because of age, arthritis and probably too much whiskey, I have to improvise to hold things tightly. Thus this whole assembly.
This pic, ignoring the coke and Economist, shows the underside with the instrument housing pulled down tight using the 2x4mm threaded holes.
The top is secured by 2 bent straps. All this pushes it together with some force and the next step is to figure out a way to fold the lip of the collar back over the glazed cover. Needless to say I would rather not attempt this with a hammer.
To be continued, I hope.
"Say not the struggle naught availeth." A H Clough.
'78 GL1000 Trike
1st bike: '58 150cc Ambassador 2 stroke. learned how to chuck it down the road
'31 BSA 500 single long stroke Sloper, dug out of a wall in Sussex, never went that well...
'49 Sunbeam S8, built from bits in '67, used daily, sold to a US biker in '84, still miss it
3 BSA Bantams, now a daughter has one
'78 Honda 500T
'78 GL1000 Trike
1st bike: '58 150cc Ambassador 2 stroke. learned how to chuck it down the road
'31 BSA 500 single long stroke Sloper, dug out of a wall in Sussex, never went that well...
'49 Sunbeam S8, built from bits in '67, used daily, sold to a US biker in '84, still miss it
3 BSA Bantams, now a daughter has one
'78 Honda 500T
- transitman
- Titanium Member
- Posts: 495
- Joined: Sun Jul 22, 2012 12:08 am
- Location: UK
Re: MAKING A TRIKE
Recovering, hoping to start posting soon
"Say not the struggle naught availeth." A H Clough.
'78 GL1000 Trike
1st bike: '58 150cc Ambassador 2 stroke. learned how to chuck it down the road
'31 BSA 500 single long stroke Sloper, dug out of a wall in Sussex, never went that well...
'49 Sunbeam S8, built from bits in '67, used daily, sold to a US biker in '84, still miss it
3 BSA Bantams, now a daughter has one
'78 Honda 500T
'78 GL1000 Trike
1st bike: '58 150cc Ambassador 2 stroke. learned how to chuck it down the road
'31 BSA 500 single long stroke Sloper, dug out of a wall in Sussex, never went that well...
'49 Sunbeam S8, built from bits in '67, used daily, sold to a US biker in '84, still miss it
3 BSA Bantams, now a daughter has one
'78 Honda 500T
- Rat
- Photo Gallery Admin
- Posts: 15482
- Joined: Fri Oct 21, 2005 9:59 pm
- My Album: https://www.ngwclub.com/gallery/v/wingmans/rat/
- RIP: cookie
- Location: Toronto .... Canada
Re: MAKING A TRIKE
Good to hear .... looking forward to it ....
Gord
Gord
"I'd rather Ride than Shine"
‘14 KLR650 ... not a rat ... yet
‘84 GL1200i ‘R2B6' (Rat to Be 6, the last, adopted by twowings)
My Original 'RAT' was a hybrid '82 CB900/1100F
‘14 KLR650 ... not a rat ... yet
‘84 GL1200i ‘R2B6' (Rat to Be 6, the last, adopted by twowings)
My Original 'RAT' was a hybrid '82 CB900/1100F
-
- Similar Topics
- Replies
- Views
- Last post
-
- 4 Replies
- 534 Views
-
Last post by Rat