Yep. They screw right onto the end of the plug wires (unscrew the old ones first) Hint: there are 5k Ohm resistors in each plug connectors, so DO NOT use resistor plugs.
And So It Begins - A GL1000 Resto
Moderators: Brant, Sagebrush, Forum Moderators
- pidjones
- SUPER BIKER!!!!
- Posts: 3238
- Joined: Wed May 22, 2013 4:06 pm
- Location: East TN
Re: And So It Begins - A GL1000 Resto
"Love 'em all.... let God sort 'em out!"
Ex 2006 GL1800 - the Black Pearl SOLD! to make room for:
2021 Can-Am Spyder RT Limited Dark Chalk Metallic
1975 Red GL1000 project - ex Pistol Pete project
1972 Triumph T150V Trident rescue - finished and FOR SALE!
1976 Yamaha RD400c
1978 GL1000 with '75 engine - the Hunley
Ex 1978 GL1000
Ex 1979 GL1000
Ex '79 CB750F rat bike
Ex '86 SEi
Ex '77 GL1000
Ex '76 RD400
Ex '72 Penton 125 set up for flat track
Ex '73 RD250
Ex '68 TR6C - chopped
Ex 2006 GL1800 - the Black Pearl SOLD! to make room for:
2021 Can-Am Spyder RT Limited Dark Chalk Metallic
1975 Red GL1000 project - ex Pistol Pete project
1972 Triumph T150V Trident rescue - finished and FOR SALE!
1976 Yamaha RD400c
1978 GL1000 with '75 engine - the Hunley
Ex 1978 GL1000
Ex 1979 GL1000
Ex '79 CB750F rat bike
Ex '86 SEi
Ex '77 GL1000
Ex '76 RD400
Ex '72 Penton 125 set up for flat track
Ex '73 RD250
Ex '68 TR6C - chopped
- Whiskerfish
- President
- Posts: 36943
- Joined: Thu Feb 16, 2006 9:34 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/whiskerfish/
- Location: Norfolk Va
Re: And So It Begins - A GL1000 Resto
And do yourself a favor and trim a good quarter inch off the ends of the wires before installing the new caps.
"Agreement is not a requirement for Respect" CDR Michael Smith USN (Ret) 2017
"The book is wrong, this whole Conclusion is Fallacious" River Tam
"Yea I do dance awkwardly, and I am having more fun than you" Taylor Swift
2008 GL1800 IIIA "TH3DOG"
1984 GL1200 Standard
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
Psst. oh and by the way CHANGE YOUR BELTS!!!!
"The book is wrong, this whole Conclusion is Fallacious" River Tam
"Yea I do dance awkwardly, and I am having more fun than you" Taylor Swift
2008 GL1800 IIIA "TH3DOG"
1984 GL1200 Standard
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
Psst. oh and by the way CHANGE YOUR BELTS!!!!
- BruteSquad
- Chrome Member
- Posts: 161
- Joined: Mon Sep 09, 2013 1:57 pm
- Location: Cincinnati, OH
Re: And So It Begins - A GL1000 Resto
gltriker wrote: ↑Fri Jun 11, 2021 4:56 pm Don't waste energy cleaning those corroded spark plug cap terminals.
Buy 4 new spark plug caps.
NGK XD05F.
Ref. NGK #8072, for your local auto parts counter folks.
Buy them local.
NAPA and similar sources have them in their catalog.
5 bucks each is average price.
Great, thanks for the advice. Pretty sure I have resistor plugs previously purchased. Can I just remove the resistor like I saw somewhere (Randakk's maybe)?Whiskerfish wrote: ↑Fri Jun 11, 2021 8:22 pm And do yourself a favor and trim a good quarter inch off the ends of the wires before installing the new caps.
- BruteSquad
- Chrome Member
- Posts: 161
- Joined: Mon Sep 09, 2013 1:57 pm
- Location: Cincinnati, OH
Re: And So It Begins - A GL1000 Resto
Yes, my plan is to redo much or all of the harness. There are so many splices from the vetter fairing and excessive number of lights and who knows what other barn jobs.desertrefugee wrote: ↑Fri Jun 11, 2021 5:20 pm From the look of it, unplugging and thoroughly cleaning EVERY SINGLE CONNECTOR on the motorcycle would be time well spent. If not, you will be chasing gremlins in the future. Perhaps on the side of the road in an unsavory part of town...
(Seriously, spend some time on sprucing up that harness (not the least of which will include getting rid of the wire nuts!)
Better to be proactive than reactive. That one shows the result of years of neglect. Needs love.
- pidjones
- SUPER BIKER!!!!
- Posts: 3238
- Joined: Wed May 22, 2013 4:06 pm
- Location: East TN
Re: And So It Begins - A GL1000 Resto
You can, but are limited to the more expensive plugs after that. You can replace the resistor with the same length copper tubing or some solid copper wire.Great, thanks for the advice. Pretty sure I have resistor plugs previously purchased. Can I just remove the resistor like I saw somewhere (Randakk's maybe)?
"Love 'em all.... let God sort 'em out!"
Ex 2006 GL1800 - the Black Pearl SOLD! to make room for:
2021 Can-Am Spyder RT Limited Dark Chalk Metallic
1975 Red GL1000 project - ex Pistol Pete project
1972 Triumph T150V Trident rescue - finished and FOR SALE!
1976 Yamaha RD400c
1978 GL1000 with '75 engine - the Hunley
Ex 1978 GL1000
Ex 1979 GL1000
Ex '79 CB750F rat bike
Ex '86 SEi
Ex '77 GL1000
Ex '76 RD400
Ex '72 Penton 125 set up for flat track
Ex '73 RD250
Ex '68 TR6C - chopped
Ex 2006 GL1800 - the Black Pearl SOLD! to make room for:
2021 Can-Am Spyder RT Limited Dark Chalk Metallic
1975 Red GL1000 project - ex Pistol Pete project
1972 Triumph T150V Trident rescue - finished and FOR SALE!
1976 Yamaha RD400c
1978 GL1000 with '75 engine - the Hunley
Ex 1978 GL1000
Ex 1979 GL1000
Ex '79 CB750F rat bike
Ex '86 SEi
Ex '77 GL1000
Ex '76 RD400
Ex '72 Penton 125 set up for flat track
Ex '73 RD250
Ex '68 TR6C - chopped
- BruteSquad
- Chrome Member
- Posts: 161
- Joined: Mon Sep 09, 2013 1:57 pm
- Location: Cincinnati, OH
Re: And So It Begins - A GL1000 Resto
Over the weekend I did some more organizing to make sure I have everything I need. Brownie points if you know why I bought this:
Took the old valve covers/gaskets off to take a look.
Looks fine to me. Went ahead and adjusted the valves and put on the replacement covers and new gaskets
They are dechromed and need a little polish. May end up painted but not sure about color scheme yet. I got these from Brian Crow (Rogue1000) years ago. I went to look him up and was saddened to find out about his passing. I never met him but I bought these covers and a set of carbs from him. He had no reason to do so, but he threw in a bunch of useful freebies for me, a total stranger. He was just passing on his love for the bikes. And from reading his memorial page he had many friends and was a great guy. Hopefully a little of his spirit can live on in this build. Ride on, Brian.
It's about 2ft long, Tygothane. I have a new fuel filter and fuel line so I don't think it's for that.
Took the old valve covers/gaskets off to take a look.
Looks fine to me. Went ahead and adjusted the valves and put on the replacement covers and new gaskets
They are dechromed and need a little polish. May end up painted but not sure about color scheme yet. I got these from Brian Crow (Rogue1000) years ago. I went to look him up and was saddened to find out about his passing. I never met him but I bought these covers and a set of carbs from him. He had no reason to do so, but he threw in a bunch of useful freebies for me, a total stranger. He was just passing on his love for the bikes. And from reading his memorial page he had many friends and was a great guy. Hopefully a little of his spirit can live on in this build. Ride on, Brian.
- BruteSquad
- Chrome Member
- Posts: 161
- Joined: Mon Sep 09, 2013 1:57 pm
- Location: Cincinnati, OH
Re: And So It Begins - A GL1000 Resto
Is this the stock regulator for a 77? Seems aftermarket but not sure.
- NotSoLilCrippseys
- Silver Member
- Posts: 522
- Joined: Sun Nov 29, 2020 8:21 am
- Location: York County, Maine
Re: And So It Begins - A GL1000 Resto
Can't answer the question about the regulator, but I'll take a stab at the hose: I think you might have bought it to run from the brake fluid reservoir to the rear master cylinder?
Avatar is a summer '21 photo of the Blue Phoenix, our 1983 GL1100I rescue gone naked.
In the Stable and Ridable
1992 ST1100 - my longer haul tourer
1992 XJ600S - son's streetfighter
1987 VFR700 - son's latest, in blue/silver
1983 - GL1100I - naked Blue Phoenix (son's, really)
1982 GL1100I - naked bagger Cabernet
1979 GL1000 - Ginger Lynn, but not that Ginger Lynn (Wing and a Prayer)
1978 CB550K - son's cafe (carb issues still vex)
Active Project(s)
1979 GL1000 - Confirmed one owner, with original paperwork. Vetter fairing and bags, off the road in dry, heated storage for 35 years.
Sold
Not lookin' back to avoid regrets
In the Stable and Ridable
1992 ST1100 - my longer haul tourer
1992 XJ600S - son's streetfighter
1987 VFR700 - son's latest, in blue/silver
1983 - GL1100I - naked Blue Phoenix (son's, really)
1982 GL1100I - naked bagger Cabernet
1979 GL1000 - Ginger Lynn, but not that Ginger Lynn (Wing and a Prayer)
1978 CB550K - son's cafe (carb issues still vex)
Active Project(s)
1979 GL1000 - Confirmed one owner, with original paperwork. Vetter fairing and bags, off the road in dry, heated storage for 35 years.
Sold
Not lookin' back to avoid regrets
- Track T 2411
- Honored Life Member
- Posts: 8519
- Joined: Thu May 29, 2008 9:37 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
- Location: Prairie du Sac Wisconsin
Re: And So It Begins - A GL1000 Resto
Good guess, but the 1000's have the reservoir mounted directly to the rear master, unlike the 1100's...NotSoLilCrippseys wrote: ↑Wed Jun 23, 2021 9:31 pm Can't answer the question about the regulator, but I'll take a stab at the hose: I think you might have bought it to run from the brake fluid reservoir to the rear master cylinder?
"I have no special talent. I am only passionately curious." - Albert Einstein
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
- robbie202
- Silver Member
- Posts: 713
- Joined: Fri Mar 16, 2012 5:05 pm
- Location: DC
- BruteSquad
- Chrome Member
- Posts: 161
- Joined: Mon Sep 09, 2013 1:57 pm
- Location: Cincinnati, OH
Re: And So It Begins - A GL1000 Resto
Mine's a little more faded and dirtier but looks the same otherwise Thanks!
- NotSoLilCrippseys
- Silver Member
- Posts: 522
- Joined: Sun Nov 29, 2020 8:21 am
- Location: York County, Maine
Re: And So It Begins - A GL1000 Resto
And a noob reveals his ignorance - again. I learn a few things about one model and fancy myself knowledgable. Alas.Track T 2411 wrote: ↑Thu Jun 24, 2021 6:58 amGood guess, but the 1000's have the reservoir mounted directly to the rear master, unlike the 1100's...NotSoLilCrippseys wrote: ↑Wed Jun 23, 2021 9:31 pm Can't answer the question about the regulator, but I'll take a stab at the hose: I think you might have bought it to run from the brake fluid reservoir to the rear master cylinder?
Avatar is a summer '21 photo of the Blue Phoenix, our 1983 GL1100I rescue gone naked.
In the Stable and Ridable
1992 ST1100 - my longer haul tourer
1992 XJ600S - son's streetfighter
1987 VFR700 - son's latest, in blue/silver
1983 - GL1100I - naked Blue Phoenix (son's, really)
1982 GL1100I - naked bagger Cabernet
1979 GL1000 - Ginger Lynn, but not that Ginger Lynn (Wing and a Prayer)
1978 CB550K - son's cafe (carb issues still vex)
Active Project(s)
1979 GL1000 - Confirmed one owner, with original paperwork. Vetter fairing and bags, off the road in dry, heated storage for 35 years.
Sold
Not lookin' back to avoid regrets
In the Stable and Ridable
1992 ST1100 - my longer haul tourer
1992 XJ600S - son's streetfighter
1987 VFR700 - son's latest, in blue/silver
1983 - GL1100I - naked Blue Phoenix (son's, really)
1982 GL1100I - naked bagger Cabernet
1979 GL1000 - Ginger Lynn, but not that Ginger Lynn (Wing and a Prayer)
1978 CB550K - son's cafe (carb issues still vex)
Active Project(s)
1979 GL1000 - Confirmed one owner, with original paperwork. Vetter fairing and bags, off the road in dry, heated storage for 35 years.
Sold
Not lookin' back to avoid regrets
- BruteSquad
- Chrome Member
- Posts: 161
- Joined: Mon Sep 09, 2013 1:57 pm
- Location: Cincinnati, OH
Re: And So It Begins - A GL1000 Resto
Had a little time to look at some of my electrical work that needs done. I need to replace a connector but want to make sure I have the right size. Does anyone know the gauge of the wires that run off the solenoid to the ignition switch and rectifier (red and red/white wires)?
- BruteSquad
- Chrome Member
- Posts: 161
- Joined: Mon Sep 09, 2013 1:57 pm
- Location: Cincinnati, OH
Re: And So It Begins - A GL1000 Resto
Well, didn't get much time during July but finally got some time over the past week and made some progress. Got my electric patched up. Won't know if there are any gremlins til I get it running but everything is connected. Also put in my water pump and got the transmission/water pump cover back on. Took a lot longer than I'd hoped but was going fine. I was about finished and that's when I ended up snapping one of the bolts. It was giving some resistance before it was even seated and snapped about half way in. How screwed am I? Can a left handed bit get that out of there? Any other tips? I'm worried I'll have to pull the engine to get it out. It's one of the one's blocked by the frame.
- pidjones
- SUPER BIKER!!!!
- Posts: 3238
- Joined: Wed May 22, 2013 4:06 pm
- Location: East TN
Re: And So It Begins - A GL1000 Resto
IMHO, pulling the engine is easier than working around a frame rail. Sometimes a left-hand bit (a good one) will work, sometimes (although rarely) an EzOut. Often taking the cover back off will give you enough to grab.
"Love 'em all.... let God sort 'em out!"
Ex 2006 GL1800 - the Black Pearl SOLD! to make room for:
2021 Can-Am Spyder RT Limited Dark Chalk Metallic
1975 Red GL1000 project - ex Pistol Pete project
1972 Triumph T150V Trident rescue - finished and FOR SALE!
1976 Yamaha RD400c
1978 GL1000 with '75 engine - the Hunley
Ex 1978 GL1000
Ex 1979 GL1000
Ex '79 CB750F rat bike
Ex '86 SEi
Ex '77 GL1000
Ex '76 RD400
Ex '72 Penton 125 set up for flat track
Ex '73 RD250
Ex '68 TR6C - chopped
Ex 2006 GL1800 - the Black Pearl SOLD! to make room for:
2021 Can-Am Spyder RT Limited Dark Chalk Metallic
1975 Red GL1000 project - ex Pistol Pete project
1972 Triumph T150V Trident rescue - finished and FOR SALE!
1976 Yamaha RD400c
1978 GL1000 with '75 engine - the Hunley
Ex 1978 GL1000
Ex 1979 GL1000
Ex '79 CB750F rat bike
Ex '86 SEi
Ex '77 GL1000
Ex '76 RD400
Ex '72 Penton 125 set up for flat track
Ex '73 RD250
Ex '68 TR6C - chopped
-
- Similar Topics
- Replies
- Views
- Last post