heres my new project bike.
Moderators: Brant, Sagebrush, Forum Moderators
-
- Lead Member
- Posts: 8
- Joined: Sun Oct 07, 2018 7:33 pm
- Location: PG, BC, Canada
heres my new project bike.
1983 gl1100. Evidently someone confused it with a sport bike and put some awful looking lights on it. The paint is in terrible shape and looks like it was applied by a chimp with a dollar store spray can. The front fender has been hacked. The anodized grips look very out of place. The seat is as uncomfortable as it is ugly and the engine smokes a little bit. All this aside, I am looking forward to building something very cool out of this poor abused goldwing.
- Attachments
-
- 20181017_160134.jpg (242.66 KiB) Viewed 275 times
-
- 20181017_160139.jpg (247.43 KiB) Viewed 275 times
-
- 20181017_160148.jpg (211.88 KiB) Viewed 275 times
-
- 20181017_160201.jpg (224.37 KiB) Viewed 275 times
-
- 20181017_160213.jpg (168.25 KiB) Viewed 275 times
@>#\@
- flyin900
- Gold Member
- Posts: 1489
- Joined: Sun Jan 10, 2010 3:50 pm
- Location: Canada
Re: heres my new project bike.
Welcome Chris,
Are you sure it's an 83? The wheels and brake calipers are from a 1980 or 81 model year. You have your work cut out there yet these motors are pretty tough and if it only smokes on start up it may just be valve seals. If it has had a long layup the rings may also be gummed up and usually running them will help in that area.
Lots of good tips under the Shoptalk Section and knowledgeable people who can help when you get stuck with a problem.
Are you sure it's an 83? The wheels and brake calipers are from a 1980 or 81 model year. You have your work cut out there yet these motors are pretty tough and if it only smokes on start up it may just be valve seals. If it has had a long layup the rings may also be gummed up and usually running them will help in that area.
Lots of good tips under the Shoptalk Section and knowledgeable people who can help when you get stuck with a problem.
Current Bikes:
1966 CL77 - Honda 305cc - Dual purpose - "Gentleman's Scrambler" was a period moniker.
1967 CL175K0 - Low production number with #802 engine serial- winter 2019/2020 full restoration.
1972 CB350F - Baby Four with low mileage - Cosmetic refresh to the next level 2021/2022.
1978 CB550K - Very original bike with only 7499 Km. from new - light cleanup and refresh done.
1983 CB1100F - Canadian model - DOHC Supersport in pristine low kilometre condition from new.
1984 GL1200 - Standard model in showroom condition - two owner bike from new.
1984 CX650E - Restored summer 2017 - a rare Eurosport model - excellent one owner bike.
1966 CL77 - Honda 305cc - Dual purpose - "Gentleman's Scrambler" was a period moniker.
1967 CL175K0 - Low production number with #802 engine serial- winter 2019/2020 full restoration.
1972 CB350F - Baby Four with low mileage - Cosmetic refresh to the next level 2021/2022.
1978 CB550K - Very original bike with only 7499 Km. from new - light cleanup and refresh done.
1983 CB1100F - Canadian model - DOHC Supersport in pristine low kilometre condition from new.
1984 GL1200 - Standard model in showroom condition - two owner bike from new.
1984 CX650E - Restored summer 2017 - a rare Eurosport model - excellent one owner bike.
- chewy999
- SUPER BIKER!!!!
- Posts: 3214
- Joined: Tue Oct 16, 2012 11:21 am
- Location: Haddenham, Cambs, UK
Re: heres my new project bike.
They say beauty is in the eye of the beholder, but sometimes you wonder what some people are looking at. The things you mention can be put right and as we know these bikes are pretty solid so with a little TLC I'm sure you can put your mark on it.
Previous Rides,
1980 CB250N Good to learn on
1981 CX500 good mid range tourer, went to Austria on it!
1983 GL1100C Pride and joy, sold when I bought my 1st house, big mistake
1985 GL650 Silverwing another mistake, horrible bike
1986 CBX550 Good commuter
1989 Suzuki GS750 (1976) cheap and cheerful until a dog ran out in front of me on Xmas Eve, 1991
Current bikes
2010 CB1300 back on a bike after 19 years, two divorces, children grown up etc
1980 GL1100 NOW ON THE ROAD, still use CB1300.
1980 CB250N Good to learn on
1981 CX500 good mid range tourer, went to Austria on it!
1983 GL1100C Pride and joy, sold when I bought my 1st house, big mistake
1985 GL650 Silverwing another mistake, horrible bike
1986 CBX550 Good commuter
1989 Suzuki GS750 (1976) cheap and cheerful until a dog ran out in front of me on Xmas Eve, 1991
Current bikes
2010 CB1300 back on a bike after 19 years, two divorces, children grown up etc
1980 GL1100 NOW ON THE ROAD, still use CB1300.
- TNTbefree
- Silver Member
- Posts: 928
- Joined: Sun Mar 23, 2014 8:49 am
- Location: Jacksonville, FL
Re: heres my new project bike.
Sweet. It came with a fork brace too. She runs. The rest is window dressing. Make sure you start a build thread and post as much as you can. We'll be watching...
- robin1731
- Membership Admin
- Posts: 21729
- Joined: Mon May 29, 2006 8:31 am
- Location: Decatur, Indiana
Re: heres my new project bike.
Done.TNTbefree wrote:Snip...……. Make sure you start a build thread and post as much as you can. ..
1976 Goldwing Super Sport
1985 Honda Elite
1976 KZ900 Dragbike
1992 ZX7 Dragbike (KZ900 style motor w/NOS)
and a rotation of various purchases
Randakk approved Carb Rebuilder
1985 Honda Elite
1976 KZ900 Dragbike
1992 ZX7 Dragbike (KZ900 style motor w/NOS)
and a rotation of various purchases
Randakk approved Carb Rebuilder
- Easter
- True Blue Steel Biker
- Posts: 2999
- Joined: Thu Sep 13, 2012 11:33 am
- Location: South of Houston 100 miles
Re: heres my new project bike.
Good luck with the project.
Bikes at present:
83 XL 600r with a 2004 XR650L engine
And a slightly worse for the wear BMW GS adventure bike awaiting repair
83 GL in process
83 XL 600r with a 2004 XR650L engine
And a slightly worse for the wear BMW GS adventure bike awaiting repair
83 GL in process
- sunnbobb
- Facebook Admin
- Posts: 21272
- Joined: Thu Jan 10, 2008 4:09 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/sunnbobb/
- Location: LaConner, WA
Re: heres my new project bike.
watching!
I found the end of the internet
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
- Track T 2411
- Honored Life Member
- Posts: 8511
- Joined: Thu May 29, 2008 9:37 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
- Location: Prairie du Sac Wisconsin
Re: heres my new project bike.
Looks like a good place to start. As flyin900 mentioned above, most stuff on the bike looks to be 80-81 vintage. It's important to know if you've got a mixture of stuff, because things like brake rebuild parts, coils, etc. are different from year to year...
Good luck with the build!
Good luck with the build!
"I have no special talent. I am only passionately curious." - Albert Einstein
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 14 Replies
- 941 Views
-
Last post by tomk1960
-
- 8 Replies
- 1419 Views
-
Last post by redwood
-
- 16 Replies
- 812 Views
-
Last post by maintainer