But if I understand, the cable needs to be completely pulled out, sinc with need to noticeably shorten the outer cable without cutting into the inner cable…? Make sense?
Say hello to ‘Dixie’
Moderators: Brant, Sagebrush, Forum Moderators
-
- Silver Member
- Posts: 540
- Joined: Tue Jan 07, 2020 12:36 pm
- Location: Southern USA
Re: Say hello to ‘Dixie’
Project bike "Dixie" - 1986 GL1200 Aspencade being rebuilt from ground up to be a naked 'wing. Build progress thread here: viewtopic.php?f=30&t=71959
Build log video: View it here
BOTM November '22
Build log video: View it here
BOTM November '22
- CYBORG
- Moderator
- Posts: 24538
- Joined: Mon Jan 14, 2008 12:52 pm
- Location: Muskegon mich
Re: Say hello to ‘Dixie’
yes. Pull inter cable out. Cut the outer cable so it can be clamped at the housing clamp with the outer cable clamped just at the end of it. Then install the inter cable. With the choke mecanizm in it's fully closed position, install the inter cable. Now when you pull the choke handle, it will move the inter cable, and the carb part to the closed position. If you are still confused send me your phone number, and we can discuss it
1978 custom GL1000
1977 custom with 1200 engine
1985 gl1200
1977 custom with 1200 engine
1985 gl1200
-
- Silver Member
- Posts: 540
- Joined: Tue Jan 07, 2020 12:36 pm
- Location: Southern USA
Re: Say hello to ‘Dixie’
I will take you up on that - perhaps later in the week or toward the weekend when i can get back in my shop?CYBORG wrote: ↑Mon Jan 24, 2022 9:05 pm yes. Pull inter cable out. Cut the outer cable so it can be clamped at the housing clamp with the outer cable clamped just at the end of it. Then install the inter cable. With the choke mecanizm in it's fully closed position, install the inter cable. Now when you pull the choke handle, it will move the inter cable, and the carb part to the closed position. If you are still confused send me your phone number, and we can discuss it
I did a successful solder on my test piece last night, but the biggest issue now is the sheathing is getting torn up in the process, and the ferrule doesnt wanna seat back on properly (and my attempts to re crimp it have been crude)
Project bike "Dixie" - 1986 GL1200 Aspencade being rebuilt from ground up to be a naked 'wing. Build progress thread here: viewtopic.php?f=30&t=71959
Build log video: View it here
BOTM November '22
Build log video: View it here
BOTM November '22
-
- Silver Member
- Posts: 540
- Joined: Tue Jan 07, 2020 12:36 pm
- Location: Southern USA
Re: Say hello to ‘Dixie’
Sneak peek of things to come:
Project bike "Dixie" - 1986 GL1200 Aspencade being rebuilt from ground up to be a naked 'wing. Build progress thread here: viewtopic.php?f=30&t=71959
Build log video: View it here
BOTM November '22
Build log video: View it here
BOTM November '22
- wingrider
- SUPER BIKER!!!!
- Posts: 3724
- Joined: Thu May 24, 2012 12:15 pm
- Location: Maple Lake, MN USA
Re: Say hello to ‘Dixie’
Lookin’ good!
2002 1800 Wing
2001 Valkyrie Interstate
1978 1200 EFI Wing with Motorvation Coupe Royale sidecar
1977 1200 Wing cafe/bobber project
1974 Suzuki GT550
2001 Valkyrie Interstate
1978 1200 EFI Wing with Motorvation Coupe Royale sidecar
1977 1200 Wing cafe/bobber project
1974 Suzuki GT550
-
- Silver Member
- Posts: 540
- Joined: Tue Jan 07, 2020 12:36 pm
- Location: Southern USA
Re: Say hello to ‘Dixie’
So….anyone have any thoughts on a paint color for this gal?
Thought about something root beer-ish would evoke the era she’s from
Also possibly a silvery gray kind of BMWish, but I already have a lot of gray going on with the engine.
?
Thought about something root beer-ish would evoke the era she’s from
Also possibly a silvery gray kind of BMWish, but I already have a lot of gray going on with the engine.
?
Project bike "Dixie" - 1986 GL1200 Aspencade being rebuilt from ground up to be a naked 'wing. Build progress thread here: viewtopic.php?f=30&t=71959
Build log video: View it here
BOTM November '22
Build log video: View it here
BOTM November '22
- Whiskerfish
- President
- Posts: 36853
- Joined: Thu Feb 16, 2006 9:34 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/whiskerfish/
- Location: Norfolk Va
Re: Say hello to ‘Dixie’
Lately I have been really liking the blue grey colors. We are in the process of redoing our living room and went with a "Winter Lake" color from Benjamin Moore. Changes quite a bit depending on the lighting. Have already checked and the local paint store can make me up some spray bombs. I was thinking about it for my dresser but it might not be right for as much engine as you have showing.
"Agreement is not a requirement for Respect" CDR Michael Smith USN (Ret) 2017
"The book is wrong, this whole Conclusion is Fallacious" River Tam
2008 GL1800 IIIA "TH3DOG"
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
and a whole garage full of possibilities!!
Psst. oh and by the way CHANGE YOUR BELTS!!!!
"The book is wrong, this whole Conclusion is Fallacious" River Tam
2008 GL1800 IIIA "TH3DOG"
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
and a whole garage full of possibilities!!
Psst. oh and by the way CHANGE YOUR BELTS!!!!
- Fred Camper
- Vice President
- Posts: 6890
- Joined: Wed Aug 12, 2009 9:38 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/Jeff+Bozeman/
- Location: Metro Detroit
- Contact:
Re: Say hello to ‘Dixie’
I do like Winter Lake. Lots going on with that color.
Proud member of the NGW Cartel (Rochester MI)
1977 GL1000 BADDOG (April 2012 BOTM)
1976 LTD - '993 LTD...and so it begins'
You should remember that it's peace of mind you're after and not just fixing the machine. R.Pirsig
1977 GL1000 BADDOG (April 2012 BOTM)
1976 LTD - '993 LTD...and so it begins'
You should remember that it's peace of mind you're after and not just fixing the machine. R.Pirsig
-
- Silver Member
- Posts: 540
- Joined: Tue Jan 07, 2020 12:36 pm
- Location: Southern USA
Re: Say hello to ‘Dixie’
Progress pic - mock-up of where we’re headed:
Project bike "Dixie" - 1986 GL1200 Aspencade being rebuilt from ground up to be a naked 'wing. Build progress thread here: viewtopic.php?f=30&t=71959
Build log video: View it here
BOTM November '22
Build log video: View it here
BOTM November '22
- CYBORG
- Moderator
- Posts: 24538
- Joined: Mon Jan 14, 2008 12:52 pm
- Location: Muskegon mich
- Fred Camper
- Vice President
- Posts: 6890
- Joined: Wed Aug 12, 2009 9:38 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/Jeff+Bozeman/
- Location: Metro Detroit
- Contact:
Re: Say hello to ‘Dixie’
Looks like my kind of a wing. Since I am retired and on a fixed income, may I have it? I promise to live it dearly lol.
Proud member of the NGW Cartel (Rochester MI)
1977 GL1000 BADDOG (April 2012 BOTM)
1976 LTD - '993 LTD...and so it begins'
You should remember that it's peace of mind you're after and not just fixing the machine. R.Pirsig
1977 GL1000 BADDOG (April 2012 BOTM)
1976 LTD - '993 LTD...and so it begins'
You should remember that it's peace of mind you're after and not just fixing the machine. R.Pirsig
- CYBORG
- Moderator
- Posts: 24538
- Joined: Mon Jan 14, 2008 12:52 pm
- Location: Muskegon mich
Re: Say hello to ‘Dixie’
Fred Camper wrote: ↑Mon Mar 21, 2022 5:25 pm Looks like my kind of a wing. Since I am retired and on a fixed income, may I have it? I promise to live it dearly lol.
hey. I retired first
1978 custom GL1000
1977 custom with 1200 engine
1985 gl1200
1977 custom with 1200 engine
1985 gl1200
-
- Silver Member
- Posts: 540
- Joined: Tue Jan 07, 2020 12:36 pm
- Location: Southern USA
Re: Say hello to ‘Dixie’
I’m getting really exited. I’ve been working on it for two years plus - way more needed to be done than I realized when I bought it.
Just finished redoing the electrical, got that cx500 fender cut and installed with Lucas taillight, now it’s a matter of a little body work and paint, fabricate a gauge pod, and final tune up!
Build process slideshow forthcoming…
Just finished redoing the electrical, got that cx500 fender cut and installed with Lucas taillight, now it’s a matter of a little body work and paint, fabricate a gauge pod, and final tune up!
Build process slideshow forthcoming…
Project bike "Dixie" - 1986 GL1200 Aspencade being rebuilt from ground up to be a naked 'wing. Build progress thread here: viewtopic.php?f=30&t=71959
Build log video: View it here
BOTM November '22
Build log video: View it here
BOTM November '22
- Whiskerfish
- President
- Posts: 36853
- Joined: Thu Feb 16, 2006 9:34 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/whiskerfish/
- Location: Norfolk Va
Re: Say hello to ‘Dixie’
"LUCAS" Oh no Mr Bill!!!
"Agreement is not a requirement for Respect" CDR Michael Smith USN (Ret) 2017
"The book is wrong, this whole Conclusion is Fallacious" River Tam
2008 GL1800 IIIA "TH3DOG"
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
and a whole garage full of possibilities!!
Psst. oh and by the way CHANGE YOUR BELTS!!!!
"The book is wrong, this whole Conclusion is Fallacious" River Tam
2008 GL1800 IIIA "TH3DOG"
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
and a whole garage full of possibilities!!
Psst. oh and by the way CHANGE YOUR BELTS!!!!
- Whiskerfish
- President
- Posts: 36853
- Joined: Thu Feb 16, 2006 9:34 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/whiskerfish/
- Location: Norfolk Va
Re: Say hello to ‘Dixie’
Sorry can't resist
The Lucas motto: "Get home before dark."
Lucas is the patent holder for the short circuit.
Lucas - Inventor of the first intermittent wiper.
Lucas - Inventor of the self-dimming headlamp.
The three position Lucas switch - Dim, Flicker and Off.
The Original Anti-Theft Device - Lucas Electrics.
>Lucas is an acronym for Loose Unsoldered Connections and Splices
Lucas systems actually uses AC current; it just has a random frequency.
"I have had a Lucas pacemaker for years and have never had any trou..."
If Lucas made guns, wars would not start.
A friend of mine told everybody he never had any electric problems with his Lucas equipment. Today he lives in the countryside, in a large manor with lots of friendly servants around him an an occasional ice cold shower...
Back in the 70's, Lucas decided to diversify its product line and began manufacturing vacuum cleaners. It was the only product they offered which did not suck.
Q: Why do the British drink warm beer? A: Because Lucas makes their refrigerators
Alexander Graham Bell invented the Telephone.Thomas Edison invented the Light Bulb. Joseph Lucas invented the Short Circuit.
Recommended procedure before taking on a repair of Lucas equipment: Check the position of the stars,kill a chicken and walk three times clockwise around your car chanting:" Oh mighty Prince of Darkness protect your unworthy servant.."
"Agreement is not a requirement for Respect" CDR Michael Smith USN (Ret) 2017
"The book is wrong, this whole Conclusion is Fallacious" River Tam
2008 GL1800 IIIA "TH3DOG"
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
and a whole garage full of possibilities!!
Psst. oh and by the way CHANGE YOUR BELTS!!!!
"The book is wrong, this whole Conclusion is Fallacious" River Tam
2008 GL1800 IIIA "TH3DOG"
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
and a whole garage full of possibilities!!
Psst. oh and by the way CHANGE YOUR BELTS!!!!