Page 3 of 5

Re: GL1000 - Land Speed Racing Record Holder

Posted: Wed Sep 08, 2021 2:39 pm
by dontwantapickle
Yep, Shinko Tour Masters, Rated to 150 mph. Good, cheap tires!
(and they'll fit on my street bike when the time comes). :2thumbs

There was only my 1000 and a 1800 representing goldwing's at the event.
I was racing for a record and he was doing the "run whatcha brung" class, which is just for the experience and a time slip.
The starting line:
240733280_4407568432639089_7523821622293759590_n (2).jpg
240733280_4407568432639089_7523821622293759590_n (2).jpg (200.92 KiB) Viewed 837 times
703EFB0E-.jpg
703EFB0E-.jpg (128.68 KiB) Viewed 837 times

Re: GL1000 - Land Speed Racing Record Holder

Posted: Wed Sep 08, 2021 2:49 pm
by dontwantapickle
The class that I was in is: MPS - CF 1000
That's Modified partially streamlined - classic fuel 1000cc.

Modified - it ain't stock
Partially streamlined - bodywork
Classic - engines produced before 1980
Fuel - any fuel allowed ( gas, E85, nitro, methanol, nitrous, ect)
1000 - maximum engine displacement 1000 cc's.

It's kinda neat that even tho I was in the Fuel class and could use anything,
I ran my bike on regular 'ol 87 octane pump gas from my local Co-Op.
Nothing special.

The bike that previously held the record was a cb1000 with nitrous.
That record was set in 2014.

Re: GL1000 - Land Speed Racing Record Holder

Posted: Thu Sep 09, 2021 11:51 pm
by dontwantapickle
before any bike can race on the salt, It must go through "scrutineering"
This is where it is checked for class compliance, safety stuff, ect.:
0829210848a (2).jpg
0829210848a (2).jpg (171.25 KiB) Viewed 842 times

Re: GL1000 - Land Speed Racing Record Holder

Posted: Fri Sep 10, 2021 10:49 am
by NotSoLilCrippseys
OK. I'm more impressed than I was before - and I was darned impressed before.

Thanks for the details.

Re: GL1000 - Land Speed Racing Record Holder

Posted: Fri Sep 10, 2021 12:02 pm
by pidjones
Just thinking remove the fan and the plate (leave the struts) for the front upper mount and replace the radiator with one from say a VTX (narrower but maybe a bit taller) to reduce a little wind resistance. Maybe 140 possible?

Re: GL1000 - Land Speed Racing Record Holder

Posted: Fri Sep 10, 2021 12:32 pm
by dontwantapickle
The cooling fan and the plate have nothing to do with the aerodynamics of the bike.
They are hidden behind the radiator and out of the air flow.

The plate is still on there because I needed a place to mount some wiring.
also because I didn't want salt spray to be blown up all over my carburetors.

The reason that there is still a fan on the bike is because I didn't want my engine to overheat.

I was working on the premise of durability and dependability.
"To finish first... First you must finish".

Re: GL1000 - Land Speed Racing Record Holder

Posted: Fri Sep 10, 2021 5:48 pm
by Oldboy
Great job, what rpm did you turn?

Re: GL1000 - Land Speed Racing Record Holder

Posted: Fri Sep 10, 2021 11:28 pm
by dontwantapickle
Oldboy wrote: Fri Sep 10, 2021 5:48 pm Great job, what rpm did you turn?
Good question !
I have a digital tach on the bike but to be honest... I was too busy riding the bike to
pay much attention to the gauge.

I know that I saw a 8, so I'm gonna say 8K+.
I think it was pretty much maxed there due to the amount of air in the atmosphere.

Denser air = more oxygen molecules - oxygen makes the engine to spin more rpm's.

The density altitude changes constantly on the salt with the air becoming thinner as the
day heats up.
People go faster in the morning when the air is coolest.

Re: GL1000 - Land Speed Racing Record Holder

Posted: Sun Sep 12, 2021 8:21 pm
by dontwantapickle
After breaking a record and before the displacement is measured, the
engine is "sealed" with paint on bolts, valve cover joints, head gaskets, ect.
before it can leave impound.

The officials take adherence to the rulebook serious.
As they should.
A great bunch of very smart, dedicated motorcycle people.
0831210836a (4).jpg
0831210836a (4).jpg (140.71 KiB) Viewed 841 times

Re: GL1000 Goldwing - Land Speed Racing Record Holder

Posted: Mon Sep 13, 2021 10:43 pm
by dontwantapickle
We all know that racing stars have big fancy rigs.
Huge custom motorcoaches, merch. trailers, ect..
land speed racing is no different.

It is really impressive to see some of the teams pit setups.
Hospitality areas,
crew members all in matching shirts,
Computers and rolling tool boxes.
High class stuff.
Nice, good for them!






And........ Then there is us :lol: .
1991 ford Ranger and a u-haul trailer:
Our Pits:
0828211456 (2).jpg
0828211456 (2).jpg (106.37 KiB) Viewed 840 times
We even camped a couple of nights:
0902210716 (2).jpg
0902210716 (2).jpg (103.43 KiB) Viewed 840 times
Our accommodations may have been a bit sparse, But my wife and I had a great adventure,
and had everything needed to set a record!
Life is good!

Re: GL1000 Goldwing - Land Speed Racing Record Holder

Posted: Mon Sep 13, 2021 11:32 pm
by dontwantapickle
Well, I guess that's about all for this thread.
The bike is back home, put back together and running again.
0814211027.jpg
0814211027.jpg (137.41 KiB) Viewed 836 times
0814211028a.jpg
0814211028a.jpg (164.65 KiB) Viewed 836 times
I don't know where this project is going to go from here,
but I do know that with the added knowledge that can only be gained through experience,
I CAN make my bike go faster!

Re: GL1000 Goldwing - Land Speed Racing Record Holder

Posted: Mon Sep 13, 2021 11:41 pm
by gltriker
Excellent photos and narrative. action1

Video evidence of your Land Speed Racing Record Holder dynamic passes is coming soon for our vicarious entertainment, too ?
Please?

Re: GL1000 Goldwing - Land Speed Racing Record Holder

Posted: Tue Sep 14, 2021 8:26 am
by Sagebrush
It was a great adventure! Thanks for sharing a little of it with us.

Re: GL1000 Goldwing - Land Speed Racing Record Holder

Posted: Mon Sep 20, 2021 11:22 pm
by dontwantapickle
.

Re: GL1000 Goldwing - Land Speed Racing Record Holder

Posted: Mon Sep 20, 2021 11:35 pm
by gltriker
There you go! tumb2

Sounds lovely! ;)