solex 30 pict1 single carb setup

This is where discussions of EFI systems, Dual Carbs, Single Carb mods and plans can be discussed and shared.

If you are working on or have a problem with stock carbs then your questions do not belong here, please post them in the Goldwing Tech Discussions Forum.

Moderators: sunnbobb, Neil, Forum Moderators

Post Reply
arie1
Lead Member
Lead Member
Posts: 8
Joined: Thu Aug 11, 2016 5:28 pm

solex 30 pict1 single carb setup

#1

Post by arie1 »

Hi there , here’s a project I’m working on for my 1978 Gl1000 K3
A couple of years ago I bought this manifold from Taunusrainer, finaly got myself so far to start work on this project. As you can see the manifold has a heated plenum. The carb I’ll be using will be a solex 30 pict 1
I’m bolting the carb onto the manifold via a trespa adapater because is is pretty easy to work on (high-pressure laminate https://en.wikipedia.org/wiki/Trespa ).
Because my goldwing also rides op LPG I’ll only need a valve to operate the amount of LPG going through my carb into the manifold. Petrol will only be used as a secondary fuel in case I run out of LPG. I adapted the throttel linkage with cabel wheel from my trashed yamaha YP250 scooter. I’ve also made a manual choke instead of the electrical operated choke.

I’ll keep you informed how things progress

Cheers
Arno
The Netherlands
Attachments
DSC01465.JPG
DSC01465.JPG (102.15 KiB) Viewed 442 times
DSC01468.JPG
DSC01468.JPG (95.28 KiB) Viewed 442 times
DSC01473.JPG
DSC01473.JPG (84.09 KiB) Viewed 442 times
DSC01474.JPG
DSC01474.JPG (117.02 KiB) Viewed 442 times
DSC01477.JPG
DSC01477.JPG (103.01 KiB) Viewed 442 times
digschopper
Titanium Member
Titanium Member
Posts: 304
Joined: Tue Jan 04, 2011 12:33 pm
Location: Goatpoop ,florida

Re: solex 30 pict1 single carb setup

#2

Post by digschopper »

cool,and i like the low profile that doesn't take away the tray in the tank!
Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “Unique Carburetion”