Vacuum advance?

This is where discussions of EFI systems, Dual Carbs, Single Carb mods and plans can be discussed and shared.

If you are working on or have a problem with stock carbs then your questions do not belong here, please post them in the Goldwing Tech Discussions Forum.

Moderators: sunnbobb, Neil, Forum Moderators

Post Reply
sphen
Silver Member
Silver Member
Posts: 540
Joined: Tue Jan 07, 2020 12:36 pm
Location: Southern USA

Vacuum advance?

#1

Post by sphen »

For those that have done single carbs and where appropriate, how do you handle the vacuum advance line that usually runs from carb 4 (on a 1200) to the ignition module?
Project bike "Dixie" - 1986 GL1200 Aspencade being rebuilt from ground up to be a naked 'wing. Build progress thread here: viewtopic.php?f=30&t=71959

Build log video: View it here

BOTM November '22
sphen
Silver Member
Silver Member
Posts: 540
Joined: Tue Jan 07, 2020 12:36 pm
Location: Southern USA

Re: Vacuum advance?

#2

Post by sphen »

I looked at "Sergey" video on YT, he connected the line from the outlet on #4 intake boot to ignition module - perhaps that's close enough..?
Project bike "Dixie" - 1986 GL1200 Aspencade being rebuilt from ground up to be a naked 'wing. Build progress thread here: viewtopic.php?f=30&t=71959

Build log video: View it here

BOTM November '22
Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “Unique Carburetion”