Thread Pitch

Commonly requested diagrams

Moderators: Whiskerfish, Forum Moderators

Post Reply
User avatar
Whiskerfish
President
President
Posts: 36850
Joined: Thu Feb 16, 2006 9:34 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/whiskerfish/
Location: Norfolk Va

Thread Pitch

#1

Post by Whiskerfish »

Thread Pitch.jpg
Thread Pitch.jpg (22.54 KiB) Viewed 798 times
Thread Pitch.jpg
Thread Pitch.jpg (22.54 KiB) Viewed 798 times
"Agreement is not a requirement for Respect" CDR Michael Smith USN (Ret) 2017
"The book is wrong, this whole Conclusion is Fallacious" River Tam
2008 GL1800 IIIA "TH3DOG"
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
and a whole garage full of possibilities!!

Psst. oh and by the way CHANGE YOUR BELTS!!!!
User avatar
gregforesi
Honored Life Member
Honored Life Member
Posts: 4965
Joined: Wed Jun 10, 2009 8:42 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/Greg+Foresi/
Location: Venice, FL

Re: Thread Pitch

#2

Post by gregforesi »

There is also one (or sometimes two) classes of fine pitch threads once you get to the larger screw sizes. I know the threaded holes for the front turn signal mounts on the '78 took a fine M12. The mirror mounts may be fine thread as well.
(The fine pitch is listed second.)
M8 1.25 1.0
M10 1.5 1.25
M12 1.75 1.25
M16 2.0 1.5
2006 GL1800 (Brutus Maximus)
1978 GL1000 (White Trash - 2012 BOTY
(If you want to discuss the Trashmobile, Webers, Rearsets, Clubmans, or other stuff then send me a PM.)
"Getting old ain't for sissies" - Phyllis Diller
"So how much you gonna spend to win that $5 trophy?" - Cyborg
Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “Reference Diagrams”