Commonly requested diagrams
Moderators: Whiskerfish, Forum Moderators
- Posts: 35164
- Joined: Thu Feb 16, 2006 9:34 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/whiskerfish/
- Location: Norfolk Va
You do not have the required permissions to view the files attached to this post.
"Agreement is not a requirement for Respect" CDR Michael Smith USN (Ret) 2017
"The book is wrong, this whole Conclusion is Fallacious" River Tam
2008 GL1800 IIIA "TH3DOG"
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
and a whole garage full of possibilities!!
Psst. oh and by the way CHANGE YOUR BELTS!!!!
- Honored Life Member
- Posts: 4888
- Joined: Wed Jun 10, 2009 8:42 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/Greg+Foresi/
- Location: Venice, FL
There is also one (or sometimes two) classes of fine pitch threads once you get to the larger screw sizes. I know the threaded holes for the front turn signal mounts on the '78 took a fine M12. The mirror mounts may be fine thread as well.
(The fine pitch is listed second.)
M8 1.25 1.0
M10 1.5 1.25
M12 1.75 1.25
M16 2.0 1.5
2006 GL1800 (Brutus Maximus)
1978 GL1000 (White Trash - 2012 BOTY
(If you want to discuss the Trashmobile, Webers, Rearsets, Clubmans, or other stuff then send me a PM.)
"Getting old ain't for sissies" - Phyllis Diller
"So how much you gonna spend to win that $5 trophy?" - Cyborg