The 1975 model year split

Tips and Recommendations from Guru Mike Nixon

Moderator: Whiskerfish

User avatar
mikenixon
Early 'Wing Guru
Early 'Wing Guru
Posts: 482
Joined: Thu Dec 10, 2009 1:51 am
Location: Prescott, AZ
Contact:

The 1975 model year split

Post #1 by mikenixon » Sun Nov 26, 2017 9:08 am

A previous article compared the old serial number system with the current vehicle identification number (VIN) system, with an emphasis on revealing the vast differences betwen the two. It was demonstrated how wrong it is to call just any serial number a VIN. Though not a huge gaff, it does nonetheless considerable injustice to the comparative power and usefulness of the VIN as contrasted with the serial number. They're very different. Refer back to that article to get an idea.

But the plot thickens. Even before the VIN system was created, some interesting things were happening to vehicle identification methods. Lawmakers had long been scrutinizing what was a very loose system, one that permitted manufacturers to enhance the salability of leftover models by presenting them as freshly made. Yup, post-dating unsold vehicles. Better believe it. But here's the thing: nothing prohibited this. It was perfectly legal. There was no control over what year a manufacturer assigned to his product. None. In fact, a vehicle's model year was a totally voluntary notion, and one that didn't even exist for the first 40 years of the history of the automobile. So manufacturers could morally and legally sell leftover vehicles as future models, if they could slip them past the public eye, and in low sales years with few changes from year to year, this was easy to do.

Until 1975. It was then that legislation was passed which mandated the addition of model dating to the already-existent manufactured dating, to vehicle chassis markings. Two year designations on each frame, in other words. Bike makers could still post-date, if they dared. But now the consumer could tell, by comparing the two stampings, just how old this "new"model really was. Kind of the motor vehicle equivalent of the use-by date on your milk carton.

But only from 1975 onward. This explains why vintage motorcycle owners are often unsure as to the model year of their pre-75 machine. It's kind of up for grabs. They resort to the many published collectors' resources that are available, including the manufacturer's own model identification books (the Big Four Japanese help here) and specifications lists put together by vintage enthusiasts focusing on such things as types of fasteners or lighting equipment, or taillight sizes that changed from year to year. However, manufacturers often sprinkled a handful of an upcoming model's parts on the last couple hundred bikes made previously, so that method if determining model year can confuse. Then there's the "after September"rule. Many folks believe that if a pre-75 bike's manufacture stamping indicates September or later, then the bike is the following year's model. Often this is a pretty fair guess, because generally, manufacturers conduct meetings near the year's end to reveal to their dealers next year's models. But it's not an infallible rule, unfortunately. For one thing, often manufacturers release select new models six months apart, in many cases mid-year. Another problem is the well-known tack many state registration agencies take on pre-1975 bikes, the easy way out from their point of view, of simply assigning as the model year the year the vehicle is first registered. All of these inconsistencies are very frustrating to the collector and the purist.

But this all got straightened out for 1975 and later. Interestingly, 1975 was actually a big year for consumer legislation, bringing as it did the left side gear shift rule, headlights always on, and a host of similar vehicle laws. Among these was the watershed Magnusson-Moss Warranty Improvement Act, the most impactive piece of consumer warranty law up to that time and possibly even since, because it gave consumers a ton of new rights, not the least of which was it made it impossible for manufacturers to "void"warranties. That's right, they can't, not since 1975, and thanks to so much of the misinformation in this industry, another thing you probably believed that isn't true. More on Magnusson-Moss later.

Coming up: Gold Wing Tech Tips

User avatar
mopehead440
Billet Alum. Member
Billet Alum. Member
Posts: 272
Joined: Sat Apr 07, 2007 10:57 am
Location: Mississippi

Re: The 1975 model year split

Post #2 by mopehead440 » Tue Nov 28, 2017 7:53 pm

My Father was a 1965 Suzuki Dealer in Bloomington, Indiana. I can remember, for many years, that he would send the MSOs for every bike in stock back to Suzuki, on December 15th, and they would send new MSOs updating the year of the bike. A 1966 model became a 1967 model with the stroke of a pen! Back in the day, new models came out at any time during the year, so a particular model could be deemed any year by requesting a new MSO on leftover units. This is evident when looking at Vintage Japanese bikes, and the variance in years produced. This process took about three weeks turn around, and no bike could be sold and transferred during this period.

User avatar
mikenixon
Early 'Wing Guru
Early 'Wing Guru
Posts: 482
Joined: Thu Dec 10, 2009 1:51 am
Location: Prescott, AZ
Contact:

Re: The 1975 model year split

Post #3 by mikenixon » Thu Nov 30, 2017 6:59 pm

mopehead, cool history there! Thanks for that insight.

User avatar
mikenixon
Early 'Wing Guru
Early 'Wing Guru
Posts: 482
Joined: Thu Dec 10, 2009 1:51 am
Location: Prescott, AZ
Contact:

Re: The 1975 model year split

Post #4 by mikenixon » Thu Nov 30, 2017 7:01 pm

Heads up, MSO = manufacturer's statement of origin. Thanks again!


Return to “Mike Nixon's Spot”

Who is online

Users browsing this forum: No registered users and 2 guests