Page 3 of 3

Re: More on GL1000 ignition

Posted: Wed Jul 21, 2021 8:59 pm
by mikenixon
:)

Re: More on GL1000 ignition

Posted: Thu Jul 22, 2021 7:37 pm
by heli_madken
dontwantapickle wrote: Thu Apr 15, 2021 4:43 pm
mikenixon wrote: Thu Apr 15, 2021 3:11 pm Every Dyna S rotor made for a vintage Honda I have seen has been larger in diameter than the stock rotor. Maybe in recent years this has changed. Are yours aluminum?
maybe their QC has gotten better, I don't know, But.....

Dyna S aluminum rotor:
dyna rotors2.jpg
Stock Honda rotor:
dyna rotors3.jpg
Just for my sanity Mike, being English I have never worked in decimal inches or used a digital caliper with a readout like yours.

In your pictures the Dyna rotor has a smaller number shown than the stock, how does this make it larger?

Apologies in advance for being so dense!

Re: More on GL1000 ignition

Posted: Thu Jul 22, 2021 8:10 pm
by dontwantapickle
Those were my pics, and yes, the dyna did measure just a hair smaller,
but for all practical purposes...
they are the same.

.8090 in. = 2.05486 cm.
.8095 in = 2.05613 cm.

Re: More on GL1000 ignition

Posted: Sun Nov 07, 2021 9:40 pm
by mikenixon
5speed wrote: Tue Apr 13, 2021 8:06 am so for us newbies..we can expect a "setting timing for dummies" post soon?
I was fortunate enough to find the magic wand online. :mrgreen:
I just completed a how-to booklet.

https://www.motorcycleproject.com/text/ ... ition.html

Re: More on GL1000 ignition

Posted: Mon Nov 08, 2021 12:23 pm
by rcmatt007
mikenixon wrote: Tue Apr 13, 2021 12:30 pm So you have one of those! Cool! :) Kind of acts like the reticule on a scope, doesn't it.
put one of those sight glasses on mine in errr about 1978... put on a prestolite maybe a year later, and yes you have to set them correctly, but after that life is nice

Re: More on GL1000 ignition

Posted: Wed Nov 24, 2021 12:22 pm
by kenai
as a long sufferer on the timing scene i am overjoyed with the new book. now I don.t have too read all these posts on minutia on sub-miniate of highly technical jargon. my goal is only one - ride a well tuned bike! why tie the flies- just catch the fish//thxs mike

Re: More on GL1000 ignition

Posted: Sat Dec 11, 2021 2:59 pm
by mikenixon
kenai wrote: Wed Nov 24, 2021 12:22 pm as a long sufferer on the timing scene i am overjoyed with the new book. now I don.t have too read all these posts on minutia on sub-miniate of highly technical jargon. my goal is only one - ride a well tuned bike! why tie the flies- just catch the fish//thxs mike
Thanks Kenai!

Re: More on GL1000 ignition

Posted: Sat Dec 10, 2022 4:29 pm
by bigragu98
Can anyone tell me if the early wing (1975-1977) stock ignition rotor that fits over the spark advancer is the the same as the ignition rotor for the 1978-1979 wings? Also If any one is willing to sell a 1975-1977 stock ignition rotor thats in good condition, please let me know, or if anyone knows where to find the rotor only, please contact me. Thanks, LARRY

Re: More on GL1000 ignition

Posted: Sat Dec 10, 2022 7:56 pm
by Whiskerfish
bigragu98 wrote: Sat Dec 10, 2022 4:29 pm Can anyone tell me if the early wing (1975-1977) stock ignition rotor that fits over the spark advancer is the the same as the ignition rotor for the 1978-1979 wings? Also If any one is willing to sell a 1975-1977 stock ignition rotor thats in good condition, please let me know, or if anyone knows where to find the rotor only, please contact me. Thanks, LARRY
The advancer is different. The round sleeve the lugs of the advancer engages on is part of that but I do not know if that is physically different than the later models.