"Agreement is not a requirement for Respect" CDR Michael Smith USN (Ret) 2017 2008 GL1800 IIIA 1975/6/7/8/9 Arthur Fulmer Dressed Road bike 1975 Naked Noisy and Nasty in town bike and a whole garage full of possibilities!! Psst. oh and by the way CHANGE YOUR BELTS!!!!
Brilliant. I used to drill a 1/16th dia. hole in the bottom of the carburetor and in the top of the broken off float post, then press together with a 1/16th inch roll pin. It worked, but this looks much easier. Nice design...and simple.
Brilliant design ! Wish it was around a couple of years ago when I had to chase down an alternate carb body because of a broken float post. I didn't trust my ham-handed self to be able to do the other Randakk fix at the time.