A Truck to Break the Monotony

A place for mechanical discussions that are not motorcycle related. Boats, Cadillac's, mowers, tractors, Trucks Et all.

Moderators: CYBORG, robin1731, Oldewing, Forum Moderators

Post Reply
User avatar
desertrefugee
SUPER BIKER!!!!
SUPER BIKER!!!!
Posts: 3856
Joined: Fri Nov 11, 2011 9:33 pm
Location: Chandler, AZ, USA

A Truck to Break the Monotony

#1

Post by desertrefugee »

I’ve been sort of half heartedly looking for a project Chevy pickup lately. Was sort of looking for a runner, and a pre-73, ended up with neither!

I have done an awful lot of classic vehicle restoration, but it’s been a while. Now that I’ve got a little bit of breathing room, I thought I’d pick up another one. Don’t have much of a budget for this one, and it’s a going to need a lot of love. Quite a dilemma. But it has good bones.

75 C10 shortbed, Rode hard and put up wet. Guy and his son picked it up and began a restoration, then picked up a better candidate. Lucky me. Arizona rust in the passenger floorboard, Body rough as a cob but solid. Zero interior. Freshly rebuilt very strong 383, TH400, 12 bolt. Truly the drivetrain is the best part of the truck. Everything else, and I mean every blasted thing needs attention.

Got a bed full of extra bits to pick and choose from.

Got what I think was a pretty good price, but all these little bits are going to add up. Interior and body will be the worst.

It will be a lengthy process, but I’d like to turn it into a driver sooner rather than later. Needs brakes, fuel line, interior, tires for that to happen.

We will see…
331507CD-9024-49B5-9A9A-E2C3FD39FCB9.jpeg
155D9DD2-9DC0-4182-AB45-AE42512C824F.jpeg
You do not have the required permissions to view the files attached to this post.
Last edited by desertrefugee on Mon Dec 24, 2018 9:55 pm, edited 2 times in total.
- Life is not about waiting for the storms to pass. It's about learning to ride in the rain.
User avatar
5speed
Honored Life Member
Honored Life Member
Posts: 4796
Joined: Sat Jul 11, 2015 2:37 pm
Location: Nova Scotia Canada

Re: A Truck to Break the Monotony

#2

Post by 5speed »

love the square bodies..
I owned a 76 Jimmy High Sierra Classic. 400 4bbl..
wish I still had it but the body was pretty much toast.
1982 1100 standard.
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
1986 Yamaha FJ1200
2019 Can-Am ryker (boss's new ride)
2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
heraldhamster
Honored Life Member
Honored Life Member
Posts: 4608
Joined: Wed Jun 28, 2006 2:52 pm
Location: up by the Canadian border in WA state

Re: A Truck to Break the Monotony

#3

Post by heraldhamster »

I'm partial to the '72 model chebbys, but very nice score, man!
keep us in the loop as ya make progress.
sorta bulldogged custom 1978 GL1000 - "geekster"
full Vetter dress 1979 GL1000 - "Barge" (currently down)
1986 1200 Aspencade - "Heart of Gold" - daily rider
1990 1500 Aspencade - It's ALIVE! but very, very naked. not in a good way.
1978 for $100 - project in worx
1978 from a previous member here - taking up space
my original '79 bought in '91 - replacing engine (eventually, maybe someday)

H2G2=42

A competent and self-confident person is incapable of jealousy in anything. Jealousy is invariably a symptom of neurotic insecurity. ~ Robert A. Heinlein

The good thing about science is that it's true whether or not you believe in it. ~ Neil deGrasse Tyson
User avatar
Whiskerfish
President
President
Posts: 35164
Joined: Thu Feb 16, 2006 9:34 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/whiskerfish/
Location: Norfolk Va

Re: A Truck to Break the Monotony

#4

Post by Whiskerfish »

Good Bones is how I pick my houses. Generally anything built before 1920 or so!
"Agreement is not a requirement for Respect" CDR Michael Smith USN (Ret) 2017
"The book is wrong, this whole Conclusion is Fallacious" River Tam
2008 GL1800 IIIA "TH3DOG"
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
and a whole garage full of possibilities!!

Psst. oh and by the way CHANGE YOUR BELTS!!!!
User avatar
ancientdad
Cast Iron Member
Cast Iron Member
Posts: 60
Joined: Fri Dec 21, 2018 1:26 pm

Re: A Truck to Break the Monotony

#5

Post by ancientdad »

Nothing like opening a hood and being able to actually see pretty much everything you need to touch, and even better, being able to reach it all without much contortion... love older V8 vehicles. You should have fun with that, Darrell
'73 CL450K5 brat
'84 VF1100S naked
among past rides
'79 and '80 CBXs
'75 and '76 GL1000s
(2) '73 CB750K3, '78 CB750K8/F2
User avatar
desertrefugee
SUPER BIKER!!!!
SUPER BIKER!!!!
Posts: 3856
Joined: Fri Nov 11, 2011 9:33 pm
Location: Chandler, AZ, USA

Re: A Truck to Break the Monotony

#6

Post by desertrefugee »

Welp. As noted, I've missed having a truck since the big D, but now actually needed one. Didn't need to be nice, just a hauler/tower for once or twice a month duty. Somehow, I ended up with the monster above. Monster you say? Guy before me took it over from a friend who'd started the build and passed away suddenly. He didn't know much about it other than the motor was fresh. He hadn't even started it.

But holy smokes is it fresh. Don't know the specs except it's a stroker (383), roller rockers, an Edlelbrock dual-plane and a Holley double pumper. Monster cam and a roughly 2500RPM stall converter. Actually a pleasant surprise! But, not exactly the ranch truck I was looking for. Definitely not the "driver/hauler" I needed.

So, what I "really" needed was an actual working truck to get stuff done...

Original owner '73! Rough, but cheap - and strong! My FAV truck transmission: M20 4-speed with granny low. Solid 10 year old 350 HO crate motor. Arizona rust, innumerable dents and dings:
IMG_0657.JPG
57091490448__0FA1C698-89A1-4FA8-8D7A-006A6F394543.JPG
Meanwhile, this beast remains a project. Will likely never see street duty. I'm getting the fever to play at the strip again. (But, on a shoestring budget.) Bed floor is going away to make room for rubber. (Don't worry. It's wasted anyway).
IMG_0658.JPG
IMG_0659.JPG
You do not have the required permissions to view the files attached to this post.
- Life is not about waiting for the storms to pass. It's about learning to ride in the rain.
User avatar
Whiskerfish
President
President
Posts: 35164
Joined: Thu Feb 16, 2006 9:34 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/whiskerfish/
Location: Norfolk Va

Re: A Truck to Break the Monotony

#7

Post by Whiskerfish »

So you have had it fired up now?
"Agreement is not a requirement for Respect" CDR Michael Smith USN (Ret) 2017
"The book is wrong, this whole Conclusion is Fallacious" River Tam
2008 GL1800 IIIA "TH3DOG"
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
and a whole garage full of possibilities!!

Psst. oh and by the way CHANGE YOUR BELTS!!!!
User avatar
desertrefugee
SUPER BIKER!!!!
SUPER BIKER!!!!
Posts: 3856
Joined: Fri Nov 11, 2011 9:33 pm
Location: Chandler, AZ, USA

Re: A Truck to Break the Monotony

#8

Post by desertrefugee »

Yes indeed! Strong, strong runner. Clean burning, high compression. BIG cam. Stall converter. Idles like a top fuel dragster. Home made unbaffled race mufflers with 4" tails. Did a couple tears up-and-down the street much to the neighbors' dismay, I'm sure.

This one was built to run. Need a fuel cell, some wheels and big rubber, a couple of buckets in place of the bench, get the gauges working, long wheel lugs and it's time to take it down to Wild Horse Pass...

...or just sell it to my son who's dying to pry it out of my hands. ( would save me a lot of trouble to be honest. )
Last edited by desertrefugee on Tue Feb 19, 2019 11:14 pm, edited 1 time in total.
- Life is not about waiting for the storms to pass. It's about learning to ride in the rain.
User avatar
wingrider
SUPER BIKER!!!!
SUPER BIKER!!!!
Posts: 3482
Joined: Thu May 24, 2012 12:15 pm
Location: Maple Lake, MN USA

Re: A Truck to Break the Monotony

#9

Post by wingrider »

Ahhh, keep it, and run it! Kid will get it someday when you are done with it! :-D
2002 1800 Wing
2001 Valkyrie Interstate
1978 1200 EFI Wing with Motorvation Coupe Royale sidecar
1977 1200 Wing cafe/bobber project
1974 Suzuki GT550
User avatar
Whiskerfish
President
President
Posts: 35164
Joined: Thu Feb 16, 2006 9:34 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/whiskerfish/
Location: Norfolk Va

Re: A Truck to Break the Monotony

#10

Post by Whiskerfish »

you going to upgrade the brakes I hope!!
"Agreement is not a requirement for Respect" CDR Michael Smith USN (Ret) 2017
"The book is wrong, this whole Conclusion is Fallacious" River Tam
2008 GL1800 IIIA "TH3DOG"
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
and a whole garage full of possibilities!!

Psst. oh and by the way CHANGE YOUR BELTS!!!!
User avatar
desertrefugee
SUPER BIKER!!!!
SUPER BIKER!!!!
Posts: 3856
Joined: Fri Nov 11, 2011 9:33 pm
Location: Chandler, AZ, USA

Re: A Truck to Break the Monotony

#11

Post by desertrefugee »

Front discs. Will see how they work. So far, so good...
- Life is not about waiting for the storms to pass. It's about learning to ride in the rain.
User avatar
gltriker
Honored Life Member
Honored Life Member
Posts: 4048
Joined: Fri Sep 24, 2010 9:11 pm
Location: Baldwinsville, NY (central NY)

Re: A Truck to Break the Monotony

#12

Post by gltriker »

Power brakes?
Sufficient vacuum available from the HO engine for the
booster to work correctly?
Cliff

Keep your eyes and ears open and you'll learn something new, everyday. tumb2

New users please visit our "Shop Talk" for common tips and help: <---jdvorchak
http://www.ngwclub.com/forum/page/ST
^^^^^^^click up here^^^^^ :oldies

RE: a thorough fuel tank cleaning
"And your carbs will thank you. They no longer live down stream from a sewage plant." -gregforesi tumb2
"Can't see the paint when your looking thru the handlebars..........." -Oldewing ;)
"I'd rather Ride than Shine" -RAT tumb2 Me Too!!

Cliff

'75 GL1000 home built trike; http://www.ngwclub.com/forum/viewtopic.php?f=30&t=39996
October,2017 BOTM :shock: https://nakedgoldwingsclub.com/forum/page/Welcome

previous rides:
1953 H-D Servi-car, naked, 1969-1978 (serial#53G1559 committed to memory!)
1980 CB900 Custom (triked) 1997-2003 .... R.I.P.
User avatar
desertrefugee
SUPER BIKER!!!!
SUPER BIKER!!!!
Posts: 3856
Joined: Fri Nov 11, 2011 9:33 pm
Location: Chandler, AZ, USA

Re: A Truck to Break the Monotony

#13

Post by desertrefugee »

Good question. Dont know yet. At this point, still firmly in the assessment phase. Had to put lines in front. Pedal is solid. Truck stops well from 30ish. Thats all i know for now...
- Life is not about waiting for the storms to pass. It's about learning to ride in the rain.
Post Reply

Return to “Trains, Planes, and Automobiles”