Page 1 of 1

Prestolite Electronic Ignition Instructions

Posted: Sat Sep 13, 2008 10:09 pm
by sandback
I found the instructions for the Prestolite Electronic Ignition.

Code: Select all

[img][list=][list]Here:
[/list][/list][/img][/img]

Posted: Sat Sep 13, 2008 10:10 pm
by sandback
Oh for Pete's sake.

Clearly that didn't work.

PM me with your email address and I will send you soft copy.

Posted: Sat Sep 13, 2008 10:34 pm
by roncar
OK the hard way. Thanks again, sandback.

(edit If you want to print these out go to the gallery link below and double click on each image, they will be displayed in full size and can be copied or printed WF)
https://ngwclub.com/gallery3/index.php/ ... s/album315

Image

Image

Image

Image

Image

Image

Posted: Mon Sep 15, 2008 9:51 pm
by sandback
In the immortal words of Homer Simpson...

"Doh!"

I will post the link to the docs in a separate post.

Re: Prestolite Electronic Ignition Instructions

Posted: Sun Dec 30, 2012 6:00 pm
by ericheath
Anyone have info on whether the resistor is needed with 3 ohm coils??

Re: Prestolite Electronic Ignition Instructions

Posted: Sun Dec 30, 2012 11:05 pm
by robin1731
ericheath wrote:Anyone have info on whether the resistor is needed with 3 ohm coils??

It shows one in the diagram with the stock coils. But aftermarket Dyna or Accel coils I would think you could loose it.

Re: Prestolite Electronic Ignition Instructions

Posted: Thu Jun 28, 2018 2:28 pm
by rcmatt007
resurrecting an old post, but I may need those instructions as I work on my 78, and the last time I touched the prestolite system on my bike was in 1979