I don't think Peteybug is active any more. In any case, are you concerned about getting the pedal off, or adding a grease zirk? If the pedal is froze, penetrating oil, such as PB Blaster or the like, followed by some persuasion is your best bet. Eventually, it will come loose. Good luck!freedom wrote:The pictures by Peteybug show an error message right? My rear brake pedal is stuck and I found this thread but without pictures it is not much help. Hopefully he can post the pictures again. Thanks in advance.
remove rear break sticking
Moderators: Whiskerfish, Forum Moderators
- Track T 2411
- Honored Life Member
- Posts: 8482
- Joined: Thu May 29, 2008 9:37 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
- Location: Prairie du Sac Wisconsin
Re: remove rear break sticking
"I have no special talent. I am only passionately curious." - Albert Einstein
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
-
- Zinc Member
- Posts: 36
- Joined: Thu Oct 12, 2017 2:53 am
- Location: Chicago, IL
Re: remove rear break sticking
Thinking of adding a grease zirk. ThanksTrack T 2411 wrote:I don't think Peteybug is active any more. In any case, are you concerned about getting the pedal off, or adding a grease zirk? If the pedal is froze, penetrating oil, such as PB Blaster or the like, followed by some persuasion is your best bet. Eventually, it will come loose. Good luck!freedom wrote:The pictures by Peteybug show an error message right? My rear brake pedal is stuck and I found this thread but without pictures it is not much help. Hopefully he can post the pictures again. Thanks in advance.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 5 Replies
- 319 Views
-
Last post by deathbypizza
-
- 26 Replies
- 1612 Views
-
Last post by pidjones
-
- 5 Replies
- 423 Views
-
Last post by robin1731
-
- 7 Replies
- 510 Views
-
Last post by Steevensi