Page 1 of 1

Torques Values

Posted: Tue May 08, 2012 6:25 pm
by Whiskerfish
northwood has been working on several different areas of his bike and got a bit frustrated looking all over the book for torques values so he built this spread sheet. This is straight from the Honda Shop manual.


[The extension xls has been deactivated and can no longer be displayed.]

For those that can not open an xls I also have it here in jpg format

Image

Image

Image

Re: Torques Values

Posted: Tue May 08, 2012 7:03 pm
by Placerville
Wow! This is going straight into my GoldWing file. Excellent, and thank you northwood and Whisker.

Re: Torques Values

Posted: Tue May 08, 2012 8:02 pm
by roncar
Don't forget this change.

Re: Torques Values

Posted: Tue May 08, 2012 8:11 pm
by northwood
Thats what I am looking for! Keep em coming and let me know your sources and I will update appropriatly!

Re: Torques Values

Posted: Wed May 09, 2012 1:22 am
by Roady
That's excellent NW, what a great resource!

(For those that want to use the XLS, just download OpenOffice.org's free, full office suite.)

Re: Torques Values

Posted: Sun Jul 21, 2013 10:53 pm
by gadelsperger
If you use a Mac, NeoOffice will work.

http://www.neooffice.org

Re: Torques Values

Posted: Mon Sep 02, 2013 10:56 am
by pidjones
Somehow missing from the official Honda manual is the LEFT Step mounting nut torque (also partly secures the removable section of the frame). Well, actually listed incorrectly as a 10mm in my manual, although it is in fact 12mm. I would suggest 40-45ftlbs for it.

Re: Torques Values

Posted: Fri Jun 23, 2017 8:32 pm
by desertrefugee
<<< I know this is an old thread, but I couldn't resist >>>

There are lots of torque values that are important. Some are not. Common sense and torque appropriate for the hardware used usually works in many applications.

For non-critical fasteners - or those that are securing rather than providing compression loading or clamping force - I like to use the German method:

Gudanteit.

Re: Torques Values

Posted: Sun Dec 09, 2018 10:03 pm
by twooldwings
i am still fairly new to this site and just found this page . would love to see one for the gl1100; what a time-saver !

Re: Torques Values

Posted: Sun Dec 09, 2018 10:48 pm
by robin1731
twooldwings wrote:i am still fairly new to this site and just found this page . would love to see one for the gl1100; what a time-saver !
Torque settings for fasteners will be in a shop manual. You should have one for any bike you own that you want to work on. There are also "standard" torque settings for any size fastener. A pretty good guide that works most of the time.

Re: Torques Values

Posted: Mon Dec 10, 2018 4:01 pm
by twooldwings
robin1731 wrote:
twooldwings wrote:i am still fairly new to this site and just found this page . would love to see one for the gl1100; what a time-saver !
Torque settings for fasteners will be in a shop manual. You should have one for any bike you own that you want to work on. There are also "standard" torque settings for any size fastener. A pretty good guide that works most of the time.
all correct ... having it laid out on a quick reference sheet like this really just saves time.

Re: Torques Values

Posted: Wed Dec 12, 2018 2:44 pm
by heraldhamster
glad this got bumped, hadn't seen or thought about it in a while.

Re: Torques Values

Posted: Fri Nov 06, 2020 9:56 pm
by Whiskerfish