Page 1 of 1

Torques Values

Posted: Tue May 08, 2012 6:25 pm
by Whiskerfish
northwood has been working on several different areas of his bike and got a bit frustrated looking all over the book for torques values so he built this spread sheet. This is straight from the Honda Shop manual.



1975-79 GL1000 Torque Values.xls


For those that can not open an xls I also have it here in jpg format

Image

Image

Image

Re: Torques Values

Posted: Tue May 08, 2012 7:03 pm
by Placerville
Wow! This is going straight into my GoldWing file. Excellent, and thank you northwood and Whisker.

Re: Torques Values

Posted: Tue May 08, 2012 8:02 pm
by roncar
Don't forget this change.

Re: Torques Values

Posted: Tue May 08, 2012 8:11 pm
by northwood
Thats what I am looking for! Keep em coming and let me know your sources and I will update appropriatly!

Re: Torques Values

Posted: Wed May 09, 2012 1:22 am
by Roady
That's excellent NW, what a great resource!

(For those that want to use the XLS, just download OpenOffice.org's free, full office suite.)

Re: Torques Values

Posted: Sun Jul 21, 2013 10:53 pm
by gadelsperger
If you use a Mac, NeoOffice will work.

http://www.neooffice.org

Re: Torques Values

Posted: Mon Sep 02, 2013 10:56 am
by pidjones
Somehow missing from the official Honda manual is the LEFT Step mounting nut torque (also partly secures the removable section of the frame). Well, actually listed incorrectly as a 10mm in my manual, although it is in fact 12mm. I would suggest 40-45ftlbs for it.

Re: Torques Values

Posted: Fri Jun 23, 2017 8:32 pm
by desertrefugee
<<< I know this is an old thread, but I couldn't resist >>>

There are lots of torque values that are important. Some are not. Common sense and torque appropriate for the hardware used usually works in many applications.

For non-critical fasteners - or those that are securing rather than providing compression loading or clamping force - I like to use the German method:

Gudanteit.