New2U Bike? Read Me.

Feel free to introduce yourself, tell us about your bike or just say hello. Members, say Hello and Welcome to our new members.

Moderators: rcmatt007, Neil, redwood, Forum Moderators

Post Reply
Taylorious
Cast Iron Member
Cast Iron Member
Posts: 59
Joined: Tue Jan 10, 2017 3:24 pm
Location: Oakland, C.A.
Contact:
Contact Taylorious

Re: New2U Bike? Read Me.

Post #61 by Taylorious » Tue Jan 10, 2017 3:30 pm

FANTASTIC Sticky. Thanks!
WITNESS ME :flamer

If the only tool you have is a HAMMER, everything begins to look like a nail

Santa Cruzian by Way-Of-Oakland.

76' GL1000 "gonna-be-something-special" build
04' KLX300R Rumpus Mobile (plated)
90' XR100R Goon Mobile (plated)
Top
smartingray
Lead Member
Lead Member
Posts: 5
Joined: Sun May 07, 2017 12:33 pm

Re: New2U Bike? Read Me.

Post #62 by smartingray » Sun May 07, 2017 3:13 pm

Hello everyone, My name is Steve and I'm new to this site, and to Gold wings. I bought a '86 interstate about a month ago for the princely sum of $1000.00. pics are of then, and now... The bowl of rust came out of the gas tank...
You do not have the required permissions to view the files attached to this post.
Top
smartingray
Lead Member
Lead Member
Posts: 5
Joined: Sun May 07, 2017 12:33 pm

Re: New2U Bike? Read Me.

Post #63 by smartingray » Sun May 07, 2017 3:16 pm

Here it is... I'm still trying to figure out how to use the site...
You do not have the required permissions to view the files attached to this post.
Top
User avatar
CYBORG
Moderator
Moderator
Posts: 22038
Joined: Mon Jan 14, 2008 12:52 pm
Location: Muskegon mich

Re: New2U Bike? Read Me.

Post #64 by CYBORG » Sun May 07, 2017 3:23 pm

welcome. Looks like a fun project
1978 custom GL1000
1977 custom with 1200 engine
1985 gl1200
Top
smartingray
Lead Member
Lead Member
Posts: 5
Joined: Sun May 07, 2017 12:33 pm

Re: New2U Bike? Read Me.

Post #65 by smartingray » Sun May 07, 2017 3:33 pm

Should be lots of fun, now that I finally got the tank out.... Had to take the hole a** end off the bike....
The throttle wouldn't move when I got it, turns out the carbs on the left side were the issue. Haven't opened them up yet...
Top
User avatar
Track T 2411
Honored Life Member
Honored Life Member
Posts: 6345
Joined: Thu May 29, 2008 9:37 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
Location: Prairie du Sac Wisconsin

Re: New2U Bike? Read Me.

Post #66 by Track T 2411 » Sun May 07, 2017 6:19 pm

Welcome from Wisconsin. Looks like you have the same problem as I do; I get the bike home, and parts just seem to jump off the bike, lol. Good luck, and enjoy the ride!
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow

"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown

Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.

Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!

In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
Top
BrooksGL1000
Lead Member
Lead Member
Posts: 8
Joined: Thu Jun 08, 2017 1:23 pm

Re: New2U Bike? Read Me.

Post #67 by BrooksGL1000 » Thu Jun 08, 2017 6:06 pm

Thank you, just what I was looking for. Just getting started on our 1975 GL1000, this is very helpful. Wish us luck! :crosso
Top
Post Reply

Return to “Welcome and Introductions”

Who is online

Users browsing this forum: No registered users and 1 guest

 

 



Powered by phpBB® Forum Software © phpBB Limited