Handle bars for an 85

Discuss everything about Honda GoldWing. Feel free to ask any question related to GoldWing.

Moderators: CYBORG, Oldewing, robin1731, Forum Moderators

Post Reply
User avatar
Easter
True Blue Steel Biker
True Blue Steel Biker
Posts: 2999
Joined: Thu Sep 13, 2012 11:33 am
Location: South of Houston 100 miles

Handle bars for an 85

#1

Post by Easter »

Just realized today when my new bars arrived that the 85 (at least the dressers) have One inch bars. Further complicated by reducing to 7/8 for the controls and grips. So anyone know of a nice low rise bar with both one inch center and 7/8 at the outer ends? OR--some other solution?
Bikes at present:

83 XL 600r with a 2004 XR650L engine
And a slightly worse for the wear BMW GS adventure bike awaiting repair
83 GL in process :IDTS:
User avatar
Track T 2411
Honored Life Member
Honored Life Member
Posts: 8482
Joined: Thu May 29, 2008 9:37 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
Location: Prairie du Sac Wisconsin

Re: Handle bars for an 85

#2

Post by Track T 2411 »

I've seen 7/8" bars shimmed to fit in 1 inch clamps...
"I have no special talent. I am only passionately curious." - Albert Einstein

"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow

"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown

Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!

Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!

In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
User avatar
OhioBill
Silver Member
Silver Member
Posts: 931
Joined: Sat Apr 02, 2005 9:56 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/OhioBill

Re: Handle bars for an 85

#3

Post by OhioBill »

I used the shims when I put the 1200 forks on my 75.
OhioBill

I now have GPS so I no longer get lost, just confused.
Retired and Loving it.
When I die send my body to the scrap yard.
Two hips and a shoulder replaced.

1975 Blue/ Green (Now Black) My main ride
1975 Red Gone to my son! (Burned Feb 2013)
1979 Black (to be restored)
1979 Blue (Sold)
1978 Black (back in the fold) sold again. Bought it back, again
1993 blue 1500 Sold
1976 Restoring
User avatar
Sugs
Gold Member
Gold Member
Posts: 1069
Joined: Sun Aug 09, 2015 6:12 pm
Location: Springfield, MO

Re: Handle bars for an 85

#4

Post by Sugs »

Renthal Fatbar maybe, but it says the clamping area is 1-1/8" or 28.6mm. Not sure if that would work for you.
_______________________

'79 Honda GL1000 Goldwing
User avatar
Easter
True Blue Steel Biker
True Blue Steel Biker
Posts: 2999
Joined: Thu Sep 13, 2012 11:33 am
Location: South of Houston 100 miles

Re: Handle bars for an 85

#5

Post by Easter »

Thanks all, guess I will try the shems.
Bikes at present:

83 XL 600r with a 2004 XR650L engine
And a slightly worse for the wear BMW GS adventure bike awaiting repair
83 GL in process :IDTS:
User avatar
salukispeed
Platinum Member
Platinum Member
Posts: 1951
Joined: Sun Feb 21, 2010 10:08 am
Location: Oak Forest Illinois US

Re: Handle bars for an 85

#6

Post by salukispeed »

Will some strips of 1/16 aluminum rolled into four pieces to fill the gap very much like crank bearings work? Be sure to put the top clamps on the correct way and tighten the front bolts first then the rears to finish the clamp forces. I believe there are dots that identify the front side. the gap is always at the rear on these.
Honda 72 CL100 sold
74 CB750 K4 nice driver
1966 CA77/305 Dream nostalgic driver
84 GL1200I work in progress
1970 CT 70
1982 GL500 Interstate
Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “GoldWing Tech Discussions”