1984 GL1200 Interstate to Naked
Moderators: sunnbobb, Neil, Forum Moderators
-
- Brass Member
- Posts: 33
- Joined: Sun Aug 21, 2016 6:06 pm
- Location: Iowa
1984 GL1200 Interstate to Naked
The images got all jacked up. Sorry about that.
Video http://mikericklefs.com/GL1200/1.mp4[/Video]
Craiglist - $550 needed some work on the brakes. Started on it late last fall but it got put on the back burner. Got back at it this week.
As purchased last fall.
Going with a V-Rod seat and rear fender and GL1100 shelter.
Had to shorten the lower shelter door and make the doors one piece to clear the seat. I 3d printed an ABS filler piece a that will take up the gap.
Need to fiberglass/blend the shelter and side covers to seat.
Mechanically - new caliper seals and brakes seals all the way around, new tires, wide magna bars, fork seals, and shocks.
Have belts and idlers to do along with sorting out the headlight, instruments, controls, exhaust and wiring.
Video http://mikericklefs.com/GL1200/1.mp4[/Video]
Craiglist - $550 needed some work on the brakes. Started on it late last fall but it got put on the back burner. Got back at it this week.
As purchased last fall.
Going with a V-Rod seat and rear fender and GL1100 shelter.
Had to shorten the lower shelter door and make the doors one piece to clear the seat. I 3d printed an ABS filler piece a that will take up the gap.
Need to fiberglass/blend the shelter and side covers to seat.
Mechanically - new caliper seals and brakes seals all the way around, new tires, wide magna bars, fork seals, and shocks.
Have belts and idlers to do along with sorting out the headlight, instruments, controls, exhaust and wiring.
- Attachments
-
- 842.jpg (987.13 KiB) Viewed 2399 times
Last edited by isualum on Sun Dec 13, 2020 12:13 am, edited 5 times in total.
- Track T 2411
- Honored Life Member
- Posts: 8519
- Joined: Thu May 29, 2008 9:37 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
- Location: Prairie du Sac Wisconsin
Re: 1984 GL1200 Interstate to Naked
Quite the transformation going on! Sounds like a great purchase!
"I have no special talent. I am only passionately curious." - Albert Einstein
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
-
- Chrome Member
- Posts: 131
- Joined: Wed May 25, 2016 11:19 am
- Location: Sioux Falls, SD
- Contact:
Re: 1984 GL1200 Interstate to Naked
Not sure if you’ve googled it yet, but if you search GL1100 VROD you should come across a couple videos of a similar build. One was a picture slideshow that showed some of the process of putting it together. Might help you out with the build.
-
- Chrome Member
- Posts: 131
- Joined: Wed May 25, 2016 11:19 am
- Location: Sioux Falls, SD
- Contact:
Re: 1984 GL1200 Interstate to Naked
Actually, here it is, brother. https://youtu.be/wyjohmiHf-4
-
- Brass Member
- Posts: 33
- Joined: Sun Aug 21, 2016 6:06 pm
- Location: Iowa
Re: 1984 GL1200 Interstate to Naked
I finally finished this up. Didn't take a lot of pictures but here is how it turned out.
Got a little sidetracked but finished the paint last weekend.
Had to do head gaskets and that kind of put me off on the whole project.
If anyone wants any details let me know.
Exhaust is Suzuki TL1000
http://mikericklefs.com/goldwing/841.jpg
http://mikericklefs.com/goldwing/842.jpg
http://mikericklefs.com/goldwing/843.jpg
http://mikericklefs.com/goldwing/844.JPG
Got a little sidetracked but finished the paint last weekend.
Had to do head gaskets and that kind of put me off on the whole project.
If anyone wants any details let me know.
Exhaust is Suzuki TL1000
http://mikericklefs.com/goldwing/841.jpg
http://mikericklefs.com/goldwing/842.jpg
http://mikericklefs.com/goldwing/843.jpg
http://mikericklefs.com/goldwing/844.JPG
Last edited by isualum on Sat Dec 12, 2020 11:48 pm, edited 1 time in total.
- Track T 2411
- Honored Life Member
- Posts: 8519
- Joined: Thu May 29, 2008 9:37 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
- Location: Prairie du Sac Wisconsin
Re: 1984 GL1200 Interstate to Naked
Very nicely done! Great fit and finish. Yum! Enjoy the ride!
"I have no special talent. I am only passionately curious." - Albert Einstein
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
- wingrider
- SUPER BIKER!!!!
- Posts: 3738
- Joined: Thu May 24, 2012 12:15 pm
- Location: Maple Lake, MN USA
Re: 1984 GL1200 Interstate to Naked
Very nice job!
2002 1800 Wing
2001 Valkyrie Interstate
1978 1200 EFI Wing with Motorvation Coupe Royale sidecar
1977 1200 Wing cafe/bobber project
1974 Suzuki GT550
2001 Valkyrie Interstate
1978 1200 EFI Wing with Motorvation Coupe Royale sidecar
1977 1200 Wing cafe/bobber project
1974 Suzuki GT550
- ericheath
- Honored Life Member
- Posts: 9581
- Joined: Wed Jul 29, 2009 11:20 am
- Location: Winnipeg, Manituba
Re: 1984 GL1200 Interstate to Naked
Looks great and on time for riding season.
Whatever I suggest here should be given ample time for a moderator to delicately correct. I apologize in advance.
77 WING, 1200 engine with 77 heads, cams, gl1100 foot pegs, Magna V65 front end, 764A carbs, [-gone Suzuki M109 monoshock--, replaced with gl1100 shocks] gl 1200 swing arm, gl1500 final drive, wheel and rear brakes Valkyrie seat, Meanstreak tank, Sportster pipes, Power Arc ignition off crank.
77 Wing. black
83 Wing, in pieces
"Continuing education is important even if the subject matter is fairly useless (as in this case)."---Greg Foresi
77 WING, 1200 engine with 77 heads, cams, gl1100 foot pegs, Magna V65 front end, 764A carbs, [-gone Suzuki M109 monoshock--, replaced with gl1100 shocks] gl 1200 swing arm, gl1500 final drive, wheel and rear brakes Valkyrie seat, Meanstreak tank, Sportster pipes, Power Arc ignition off crank.
77 Wing. black
83 Wing, in pieces
"Continuing education is important even if the subject matter is fairly useless (as in this case)."---Greg Foresi
- pidjones
- SUPER BIKER!!!!
- Posts: 3238
- Joined: Wed May 22, 2013 4:06 pm
- Location: East TN
Re: 1984 GL1200 Interstate to Naked
Very nice except for the lack of a front fender. But for show and fair weather (and dry roads) it looks great!
"Love 'em all.... let God sort 'em out!"
Ex 2006 GL1800 - the Black Pearl SOLD! to make room for:
2021 Can-Am Spyder RT Limited Dark Chalk Metallic
1975 Red GL1000 project - ex Pistol Pete project
1972 Triumph T150V Trident rescue - finished and FOR SALE!
1976 Yamaha RD400c
1978 GL1000 with '75 engine - the Hunley
Ex 1978 GL1000
Ex 1979 GL1000
Ex '79 CB750F rat bike
Ex '86 SEi
Ex '77 GL1000
Ex '76 RD400
Ex '72 Penton 125 set up for flat track
Ex '73 RD250
Ex '68 TR6C - chopped
Ex 2006 GL1800 - the Black Pearl SOLD! to make room for:
2021 Can-Am Spyder RT Limited Dark Chalk Metallic
1975 Red GL1000 project - ex Pistol Pete project
1972 Triumph T150V Trident rescue - finished and FOR SALE!
1976 Yamaha RD400c
1978 GL1000 with '75 engine - the Hunley
Ex 1978 GL1000
Ex 1979 GL1000
Ex '79 CB750F rat bike
Ex '86 SEi
Ex '77 GL1000
Ex '76 RD400
Ex '72 Penton 125 set up for flat track
Ex '73 RD250
Ex '68 TR6C - chopped
- 5speed
- Honored Life Member
- Posts: 5315
- Joined: Sat Jul 11, 2015 2:37 pm
- Location: Nova Scotia Canada
Re: 1984 GL1200 Interstate to Naked
what a transformation.
your blending of the side panel to the tank looks fantastic.
your blending of the side panel to the tank looks fantastic.
1982 1100 standard. (sold)
1986 Yamaha FJ1200
2000 Yamaha Roadstar
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
2019 Can-Am ryker (boss's new ride)
2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
1986 Yamaha FJ1200
2000 Yamaha Roadstar
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
2019 Can-Am ryker (boss's new ride)
2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
- dontwantapickle
- Silver Member
- Posts: 957
- Joined: Fri Oct 13, 2017 9:26 pm
- Location: Colorado
Re: 1984 GL1200 Interstate to Naked
I like it!
- sgwilly
- Gold Member
- Posts: 1031
- Joined: Thu Apr 26, 2007 6:43 pm
- Location: Clayton, NC
Re: 1984 GL1200 Interstate to Naked
Well played.
Steve
'09 Yamaha FJR1300AE
'99 Valkyrie Tourer
'89 Isuzu Trooper 3.4L
'83 GL1100 MonkeyWing (on IR)
'75 GL1000 (in the queue)
'70 Suzuki T500 Titan (in the queue)
'64 MGB
IBA #58082
All my stuff is old. It makes me feel young.
SGWilly Gallery
'09 Yamaha FJR1300AE
'99 Valkyrie Tourer
'89 Isuzu Trooper 3.4L
'83 GL1100 MonkeyWing (on IR)
'75 GL1000 (in the queue)
'70 Suzuki T500 Titan (in the queue)
'64 MGB
IBA #58082
All my stuff is old. It makes me feel young.
SGWilly Gallery
-
- Silver Member
- Posts: 540
- Joined: Tue Jan 07, 2020 12:36 pm
- Location: Southern USA
Re: 1984 GL1200 Interstate to Naked
Awesome. Any details on blending the 1100 tank to 1200 side covers? I need to do the same.
Also, what display is that and did u have any trouble wiring and calibrating?
Also, what display is that and did u have any trouble wiring and calibrating?
Project bike "Dixie" - 1986 GL1200 Aspencade being rebuilt from ground up to be a naked 'wing. Build progress thread here: viewtopic.php?f=30&t=71959
Build log video: View it here
BOTM November '22
Build log video: View it here
BOTM November '22
-
- Brass Member
- Posts: 33
- Joined: Sun Aug 21, 2016 6:06 pm
- Location: Iowa
Re: 1984 GL1200 Interstate to Naked
https://www.amazon.com/gp/product/B078R ... UTF8&psc=1
I will get some images of the side covers, I basically put them in place and used tape to bridge the gap and started to layer up fiberglass cloth and resin.
Last edited by isualum on Sat Dec 12, 2020 11:52 pm, edited 1 time in total.
- desertrefugee
- SUPER BIKER!!!!
- Posts: 3947
- Joined: Fri Nov 11, 2011 9:33 pm
- Location: Chandler, AZ, USA
Re: 1984 GL1200 Interstate to Naked
Beautiful job. One of the nicest 84+ naked conversions I've seen. But I agree, it looks incomplete without a front fender. Even a small hint of a fender.
- Life is not about waiting for the storms to pass. It's about learning to ride in the rain.
-
- Similar Topics
- Replies
- Views
- Last post